AULA SC830 Wireless Gaming Mouse Instruction Manual
- June 14, 2024
- AULA
Table of Contents
Wireless Gaming Mouse
SC830 Wireless Gaming Mouse
Product specifications
- Mouse size: 125x65x41+0.2mm
- Product weight: about 95g
- Number of keys: 7
- Connection mode: Bluetooth/2.4G/wired mode
- Operating voltage/current: DC5V ****100mA
- Charging interface: TYPE-C
- (Pl resolution: 800 red – 1200 green (default) – 1600 blue – 2400 purple yellow 4000 monochrome breathing.
- Battery capacity: 800mAh
- Return rate: 500HZ by default
- Operating platform: WindowsXP/Vista/7/8/10, working normally in windows
Installation and operation instructions
- Additional bottom mode switch: three gear toggle switch. Turn it to Bluetooth mode 1/2/blue light, and turn it to the middle When the power is off/unplugged, the 2.4G mode is red.
- The bottom button is the mode switch button 2.4G/Bluetooth channel 1/Bluetooth channel 2
- The overall backlight of the low voltage indicator light flashes slowly, indicating that the overall backlight is always on red when charging, and the indicator light is fullReturn to the current streamer
- Code matching mode lamp: 1. For 2.4G code matching mode, press left, middle and right for 3 seconds, and the yellow lamp flashes. The first lamp at the bottom is red 2. Bluetooth mandatory code matching mode Press left, middle and right for 3 seconds, the blue light flashes quickly, and the overall backlight flashes The second/third indicator at the bottom is blue. 3. Wired mode Plug and Play.
- The corresponding indicator light at the bottom is: when the toggle switch is turned down, it is in 2.4G state, the first light is on, and the bottom Press the key to disable the function. The middle part is to turn off the power. When the toggle switch is turned up, it is in the Bluetooth state, The second and third lights respectively indicate Bluetooth channel 1 and Bluetooth channel 2, which can be switched through the bottom button and cannot be switched to the A bottom indicator.
- Indicator light corresponding to the bottom switch: in 2.4G mode, press the left and right middle keys together for 3 seconds to enter forced code matching,The overall backlight on the front of the mouse flashes yellow, and the first indicator on the bottom flashes red. It is not connected after 10 seconds Succeeded. The mouse goes to sleep. Click any key of the mouse again to wake up and continue code matching. When the receiver is inserted, The indicator flashes for 2s and then enters the current light effect after it corresponds to the DPI color. When the receiver is not inserted in 2.4G mode, the mouseAfter the current light effect is on for 1s, it will enter the sleep state. Actively click any key on the left, middle and right to wake up the mouse. When it is on for 1s The headlight effect mouse cannot search the receiver and goes to sleep. Bluetooth mode: Slow flash blue for 3 times when no Bluetooth device is found The tooth 2.4G is connected back, and the device is not connected successfully, and it enters into sleep state.
- Mouse sleep/wake-up mode: 3S enters the first level sleep, move the mouse or press the key to wake up; After 60s, it will enter level 2 sleep, move or press the key to wake up; 10 minutes into sleep mode. When the computer goes into hibernation, the mouse also goes into hibernation.
Deep sleep. You need to wake up the mouse itself with any key on a single mouse and click any key Press the key to wake up the computer.
Certificate Wolf spider game mouse series: high quality products
| Part name | (Pb) | (Hg) | (Cd) | (Cr(VI)) | (PBB) | (PBDE) |
|---|---|---|---|---|---|---|
| Plastic parts | ||||||
| Metal parts | ||||||
| Circuit board assembly | ||||||
| Cable |
Remarks:
o =It means that the content of the toxic and harmful substance in all
homogeneous materials of the component is below the limit specified in GB /
T26245-2010 standard.
X = indicates that the content of the toxic and harmful substances in at least
one homogeneous part of the component exceeds the limit specified in GB /
T26245-2010 standard.
Service life of environmental protection:
According to the administrative measures for pollution control of electronic
information products of the people’s Republic of China, electronic information
products sold within the territory of the people’s Republic of China must.
Dear user
Dear users, thank you for your choice Brand products, in order to protect your
legitimate rights and interests, better service for you, our company strictly
in accordance with the people’s Republic of China “microcomputer commodity
repair, re placement and return responsibility provisions”, to provide you
with three guarantees after-sales service, product warranty instructions are
as follows.
- Since the date of purchase, under normal use, the product failure caused by poor electrical performance can be guaranteed for one year, but the damage caused by man- made damage (such as self disassembly, handling damage, bumping, soaking in water, improper input current and voltage, etc.) and damage caused by natural disasters (such as fire, flood, earthquake, rat damage, etc.) are not covered by this warranty.
- The replacement of consumables (such as batteries, foot stickers, etc.) and accessories is not covered by the warranty card.
- Please fill in all the columns in this warranty card truthfully and stamp it with the seal of the dealer.
- Once lost, this warranty card will not be reissued. Please keep it properly.
- This warranty card is only valid within the territory of the people’s Republic of China.
User warranty card
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>