Aula F98 Swappable RGB Gasket Mechanical Keyboard User Manual
- August 7, 2024
- AULA
Table of Contents
Aula F98 Swappable RGB Gasket Mechanical Keyboard User Manual
Product Overview
Connection instructions
- Switch to [ON]
- Remove the [USB
- Receiver] from the upper right corner slot of the keyboard port to use.
~ key cyan light slow flashing, then long press FN + ~ key cyan light fast
flashing into the code state, then insert the receiver to complete the code, ~
key cyan light 2s, 2.4G link successfully.
Note: 2.4G connection first search before inserting the receiver. The
factory default has been coded.
BT Connection Instructions
- Switch to [ON]
- Long press the key combination”FN+ 1″ for about 5 seconds the “1” key starts fast and flashes blue light, into the code pairing
- Search for the pairingname[AULA-F98], the Bluelight will turn on for 2 seconds after the connection is successful state.
Note
- B2 and BT are connected in the same way as BT1, BT2 can be connected by pressing the combination key [FN+2@].
- BT 3 can be connected by pressing the combination key [FN+3#]: The blue light blinks slowly when BT is connected again.
Wired Mode
- Switch to [ON]
- Plug the Type-C cable into the port on the keyboard
- Plug another USB into your computer’s USB port
Download PDF:Aula F98 Swappable RGB Gasket Mechanical Keyboard User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>