Svbony ST1 4K Wireless Video Transmitter User Guide
- August 7, 2024
- SVBONY
Table of Contents
Quick Pairing Guide
ST1 4K Wireless Video Transmitter
Step 1
Power on the TX and RX with original 5V/2A adapter&USB-C cable.
Step 2
Connect the HDMI IN on TX and HDMI OUT 1 Port on RX with HDMI Cable within 1.5m.
Step 3
During pairing, the RX connection LED blinks green rapidly for 2s and then stays on, and the TX link LED stays on green. That means the pairing is successful.
NOTE
- After pairing successfully, it is necessary to disconnect the TX/RX power supply and re-power it when you need use.
- If you find that TX/RX can’t be connected properly or need to add additional RX, please refer to the pairing steps.
Read User Manual Online (PDF format)
Loading......