SVBONY SV305 Pro Telescope Camera User Manual

: June 6, 2024
: SVBONY

Table of Contents

Package Including
Specification
How to use the SV305 Pro camera
General Clean
Structure
Quality Assurance
FCC Requirements
CE Requirements
Warranty Card
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SVBONY SV305 Pro Telescope Camera

TO CUSTOMERS
Hello friends, you can download SV305 Pro User Manual pdf file or print this file. SVBONY has the rights to modify this document without prior notice. Please download the latest version from our official website.
Thanks for purchasing your new SVBONY astronomy camera! This manual will give you a brief introduction of the SV305 Pro camera. Please read this manual completely before using it. If you have any questions, please feel free to contact us: Facebook: www.facebook.com/svbony For software installation instructions and other technical support, please email us: info@svbony.com

Package Including

SV305 Pro Astronomy Camera
2m USB 3.0 Cable
6 pin Guiding Cable
1.25″ Extension Tube
C-lens Adapter
1.25″ Dust Cover
Cleaning Cloth
User Manual
CD

Specification

Image Sensor	1/2.8” COMS Color Sensor
Sensor Model	SONY IMX290
Image Resolution	2M Pixels (1920*1080)
Diagonal Line	6.5mm
Pixel Size	2.9μm X 2.9μm
USB Type	USB 3.0
Guiding Type	6 Pin ST4 Port
Shutter	Electronic Rolling Shutter
Exposure Time	1ms-1800s
Exposure Mode	Auto/Manual
Gain	0-30
Gain Mode	Auto/Manual
White Balance	R 1-255 G 1-255 B 1-255
Maximum Frame Rate	130FPS (1920*1080)

How to use the SV305 Pro camera

Main Imaging Camera
Guiding Camera

General Clean

Svbony SV305 Pro camera comes with an optical protection window - AR glass, which could protect the sensor from dust and humidity. And the inside of the image sensor is dry and sealed. We don’t recommend customer to disassemble the camera and clean it. Because disassemble the camera may lead the sensor to get wet, or it may cause more dust to come in. If you need clean the protection window, it is best to do it during the daytime. To see the dust clearly, please connect the SV305 Pro camera to your telescope. Point the telescope to a bright place, a Barlow is required to see the dust clearly. Then adjust the exposure time in the software, make sure not over exposed. You will see the dust showing as the following image.

The big spot on the image (left) are the shadows of dust on the protection window. The Suggested way to clean them is try to blow them away with a manual air pump.
The small but dark spots on the image (right) are the shadows of dust on the sensor. The suggested way to clean it is editing the image by photography software.

Structure

Quality Assurance

The SV305 Pro camera warranty time is one year. Within warranty period, if the camera fails to function, we will provide free after-sales maintenance service. Besides the warranty days, we provide life-long maintenance services and charge only the parts that need repair or replacement. The buyer will pay for the postage of returning camera to factory to be repaired. Within the warranty period, if the following condition occurs, certain maintenance costs will be charged.
1, The malfunction and damaged caused by incorrect use, the unauthorized repairs and alteration.
2, The damage caused by fire, flood, earthquake, other natural disasters and secondary product damage.
3, The product malfunction caused by the fall and transportation failures after purchase.
4, The malfunction and damaged caused by the otherbarriers (man-made factors or external device).
5, Purchase without the warranty card and purchase invoices.

Warnings

| Before using this device, read this guide which contains important operating instructions for safe usage and control for compliance with applicable standards and regulations.
---|---

FCC Requirements

Products authorized under Part 15 using SDoC or Certification require a label containing one of the following compliance statements
(1) Receivers associated with licensed device service operaions: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
(2) Stand-alone cable input selector switch: This device complies with part 15 of the FCC Rules for use with cable television service.
(3) All other devices:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

CE Requirements

(Simple EU declaration of conformity) Hong Kong Svbony Technology Co.,Ltd declares that the equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/30/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at the following internet address: www.svbony.com.
Disposal

The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.

IC Requirements: CAN ICES-3(B)/NMB-3(B)
Avoid Choking Hazard

Small Parts. Not for children under 3 years.

Approved Accessories

|

This device meets the regulatory standards when used with the Svbony accessories supplied or designated for the product.
For a list of Svbony-approved accessories for your item, visit the following website: http://www.svbony.com

---|---

Warranty Card

Product model:Purchase Date:__.
Defect Reason:__
Dealer Name:____
User’s name:User’s Telephone:____.
User’s Address:____
User’s Email:__

Remarks:

This guarantee card should be kept by the user, no replacement if lost.
Most new products carry a one-year manufacturer’s warranty from the date of purchase.
The user can get warranty and after-sales service as below:
• Contact the seller where you buy.
For warranty service, you will need to provide a receipt proof of purchase from the actual seller for verification

Exclusions from Warranty Coverage:

To any product damaged by accident.
In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs.
If the serial number has been altered, defaced, or removed.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.