SVBONY SM401 Wireless Microscope for IOS/Android User Manual
- June 5, 2024
- SVBONY
Table of Contents
- SVBONY SM401 Wireless Microscope for IOS/Android User Manual
- SM401 Digital Microscope (for IOS/Android) Quick Start Guide Version: 1.0
- 1. Parts and Functions
- Micro USB Interface:
- 2. Use WiFi Digital Microscope on IOS/Android Device
- 2.2 Device On
- 2.3 Connecting a WiFi Digital Microscope to
- 2.4.1 APP Home Page
- 2.4.2 Preview Interface
- 2.5.3 Device Open
- FCC Requirements:
- CE Requirements:
- •Disposal
- IC Requirements:
- Approved Accessories
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SVBONY SM401 Wireless Microscope for IOS/Android User Manual
SM401 Digital Microscope (for IOS/Android) Quick Start Guide Version: 1.0
Product use: electronic circuit board testing, industrial testing, textile
testing, clock and mobile phone maintenance, skin inspection, scalp
inspection, printing inspection, teaching
and research tools, precision object amplification measurement, reading help,
hobby research, etc.
Product features: complete functions, clear imaging, exquisite workmanship, built-in battery, computer connection, small in size and portable, support for up to 12 languages, etc.
1. Parts and Functions
The pictures are for reference only, please refer to the real objects.
1.1 Instructions for Use
Part No. | Function |
---|---|
1 | Micro USB interface |
2 | Reset |
3 | LED indicator |
4 | LED brightness adjustment |
5 | LED light source |
6 | Display screen |
7 | Power key |
8 | Photo/video keys |
9 | Focal length adjusting roller |
Micro USB Interface:
You can connect USB to charge or connect to a computer. (It is not recommended
to use the equipment during charging, which will reduce the service life of
the battery of the equipment)
Reset key: Reset key. When the operation of the equipment is abnormal,
use a fine needle to poke this key to force shutdown (Note: If you need to
start up after shutdown, you need to press the on/off key again for a long
time).
1.1 Instructions for Use
LED indicator: charging indicator. In the process of charging, the red
light is on, and the light is off when it is full.
LED brightness adjusting: toggle the potentiometer to adjust the
brightness of the LED supplementary light.
LED light source: camera supplementary light.
Display screen: display the battery power and WiFi/USB connection status.
Power key: press it for a long time to switch it on and off. Photo/video
key: when the equipment is working, click this button to take photos and save
them automatically. Press this key for 2 seconds to enter the recording mode,
release the key to maintain the recording state, press it for 2 seconds to
release and exit the recording mode and save the video recorded during this
period. It can be viewed later on your IOS/Android device.
Focal length adjusting roller: when the equipment is working, rotating
this roller can adjust the focal length and focus the shooting object.
1.2 Product Specification Parameters
Item | Parameters |
---|---|
Product name | SM401 digital microscope |
Optical dimension of lens | 1/4″ |
Signal-to-noise ratio | 37dB |
Sensitivity | 4300mV/lux-sec |
Photographic resolution | 640×480, 1280720, 19201080 |
Video resolution | 640×480, 1280720, 19201080 |
Video format | Mp4 |
Picture format | JPG |
Focus mode | Manual |
Magnification factor | 50X-1000X |
Light source | 8 LEDs (adjustable brightness) |
Focusing range | 10 ~ 40mm (long-range view) |
White balance | Automatic |
Exposure | Automatic |
PC operating system | Windows xp, win7, win8, win10, |
Mac OS x 10.5 or higher
WiFi distance| Within 3 meters
Lens structure| 2G + IR
Aperture| F4.5
Lens angle of view| 16°
Interface and signal transmission mode| Micro/usb2.0
Storage temperature /humidity| -20°C – +60°C 10-80% RH
Operating temperature /humidity| 0°C – +50°C 30% ~ 85% Rh
Operating current| ~ 270 mA
Power consumption| 1.35 W
APP working environment| Android 5.0 and above,
ios 8.0 and above
WIFI implementation standard| 2.4 Ghz (EEE 802.11 b/g/n)
2. Use WiFi Digital Microscope on IOS/Android Device
2.1 APP Download
IOS: Search iWeiCamera in App Store to download and install, or scan the following QR code to select IOS version to install.
Android: Scan the following QR code and select Android (Google Play) version (international users) or Android (China) version (Chinese users) to download and install, or enter the address from the browser to download and install. IOS/Android download QR code: focus the shooting object.
Or enter the following address in the browser to download:https://active.clewm.net/DuKSYX?qru- rl=http%3A%2F%2Fqr09.cn%2FDu KSYX&g- type=1&key=bb57156739726d3828762d3954299- ca7a957b6172
2.2 Device On
Press the power key of the device for 3 seconds and the display screen will light up, and the device will be turned on.
2.3 Connecting a WiFi Digital Microscope to
IOS/Android Device
Open WiFi settings of IOS/Android devices, open WiFi, find a WiFi hotspot with
prefix “Cam-SM401” (without encryption), and click Connect. After successful
connection,
return to the main interface of IOS/Android devices.
2.4 APP Interface Introduction and Use
Open the APP and enter the APP main interface:
2.4.1 APP Home Page
Help: click to view company information, APP version, FW version and product
instructions. Preview: click to watch the real-time picture of the equipment
and operate the equipment.
File: click to view the photos and video files that have been taken.
2.4.2 Preview Interface
Zoom out: click to zoom out the screen (the default is minimum every time you
open it).
Zoom in: click to zoom in the screen (used when the picture is too small).
Reference line: click to mark the center point of the picture with a cross.
Photo: click to take photos and save files automatically.
Video record: click to record video/end video recording and automatically save
the file.
2.4.3 My Photo
Click on the My Photo, and you can view photos or videos after entering, or you can choose to delete photos or videos.
2.5 PC Measurement Software Interface Introduction and Use
2.5.1 Software Download
Log in to http://soft.hvscam.com with a browser, select the corresponding version according to your computer system, and select “HiViewSet 1.1” to download.
2.5.2 Software Interface
2.5.3 Device Open
Click the “Device” option in the upper left corner, then click “Open”, select the device you want to use in the pop-up window, and then click the “Open” option below to open the device.
If you have any questions, please contact ourcompany.
The final interpretation right belongs to our company.
Before using this device, read this guide which contains important operating instructions for safe usage and control for compliance with applicable standards and regulations.
FCC Requirements:
•Products authorized under Part 15 using SDoC or
Certification require a label containing one of the following compliance
statements
(1)Receivers associated with licensed device service operaions:
This device complies with part 15 of the FCC Rules.
Operation is subject to the condition that this device does not cause harmful
interference.
(2)Stand-alone cable input selector switch:
This device complies with part 15 of the FCC Rules for use with cable
television service.
(3)All other devices:
•This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
CE Requirements:
•(Simple EU declaration of conformity) Hong Kong
Svbony Technology Co.,Ltd declares that the equipment type is in compliance
with the essential requirements and other relevant provisions of RED Directive
2014/30/EU and the ROHS Directive 2011/65/EU and the WEEE
Directive 2012/19/EU; the full text of the EU declaration of conformity is available at the following internet address: www.svbony.com.
•Disposal
The crossed-out wheeled-bin symbol on your product, literature, or packaging
reminds you that in the European
Union, all electrical and electronic products, batteries, and accumulators
(rechargeable batteries) must be taken to designated collection locations at
the end of their working life.
Do not dispose of these products as unsorted municipal waste. Dispose of them
according to the laws in your area.
IC Requirements:
CAN ICES-3(B)/NMB-3(B)
Avoid Choking Hazard
small Parts. Not for children under 3 years.
Approved Accessories
- This device meets the regulatory standards when used with the Svbony accessories supplied or designated for the product.
- For a list of Svbony-approved accessories for your item, visit the following website: http://www.Svbony.com
Read More About This Manual & Download PDF:
References
- cam.com - Web Cam Video Chat
- NY.com, Your Personal Guide to New York City
- Digital Microscope Software Support
- Svbony - Astronomer's favorite brand
- active.clewm.net/DuKSYX?qru-
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>