MECHANICAL MY-301 Machine Crab Audio Instruction Manual
- August 7, 2024
- MECHANICAL
Table of Contents
MECHANICAL MY-301 Machine Crab Audio
PRODUCT PARAMETERS
- Product Name: Machine Crab Audio
- Interface type: Type-C
- Nominal voltage: 3.7v
- Bluetooth version: V5.0
- Audio technology: professional DSP digital audio processing
- Speaker power: 40/rated 8W/peak 10W
- Speaker specifications: full-range speaker + metal bass diaphragm
- Product model: MY301
- Charging input: 5V-2A
- Battery capacity: 2500mAh
- Transmission distance: 10M
- Battery life: 3-8H
- Frequency range: 20Hz-20KHz
- Signal-to-noise ratio: >85dB
- Distortion: <0.5%
- Product size: 161.814083mm
- Product material: ABS
- Executive standard: GB 4943. 1-2022
- Certificate Type: Quality Inspection
Features
- This product uses the industry’s advanced technical solutions, wireless bluetooth connection range is wide, the connection is stable, the audio Faster music transmission, supports independent adjustment of volume control, supports voice call function, adopts dual strong anti-Interference with MIC, support for two speakers to connect to each other (left and right channels)..
- Using high-performance full-range speakers, dedicated PEl front cavity speaker film (treble is crisp and not easy to break), High-performance magnets (explosive and powerful), tailor-made rear bass chamber diaphragm (thicker bass).
- Professional DSP digital audio processing technology, its characteristics and advantages are as follows:
- Precise audio processing: DSp digital audio processing technology can accurately process audio signals to make the sound of the speaker more clear, balanced and natural.
- High-efficiency processing speed: DSp digital audio processing technology can quickly process audio signals Processing, thereby reducing processing delay and unnecessary distortion, making music sound more real.
- Strong programmability: DSp digital audio processing technology can , be Adjust the occasion to make the performance of the music more in line with the needs of the user.
- Good noise suppression effect: DSp digital audio processing technology can effectively reduce the noise in the stereo and noise, so that the music sounds clearer.
Product description
Instructions for use
On/off button: long press for 1.5 seconds to turn on/off. In the
working state, short press to pause/play. When a call comes in, short press to
connect/hang up. Bluetooth button: Press and hold for 2 seconds to reset
the Bluetooth connection and clear the connection before disconnection. Press
and hold for 5 seconds to enter the TWS networking mode (applicable to the
networking and pairing of two speakers).
Volume down button: Short press to lower the volume level, long press for
2 seconds to switch to the previous song.
Volume plus button: Short press to increase the volume level, long press
for 2 seconds to switch to the next song.
Other status description
Timing: The audio will automatically shut down after 30 minutes if it is
not connected to a mobile phone or other equipment or disconnected halfway.
Rhythm light: It will dance with the rhythm of the music.
RGB light: The yellow light is always on when it is not working, and the
RGB light circulates to change different colors when it is working.
Indicator light: The blue indicator light flashes slowly when the
Bluetooth is not connected, and the indicator light is always on after the
Bluetooth connection is
successful. When the two speakers are connected to a network, the blue
indicator light of the main speaker flashes quickly.
Low battery reminder: The RGB red light will flash twice quickly, and the
speaker will emit a low battery reminder tone.
Charging Tips: The RGB red light will flash 3 times quickly when it is
connected to charging when it is on, and it will charge RGB when it is off.
Red light for breathing
mode, stop breathing when fully charged and turn green light to stay on.
Packing List
- Complete machine: 1 set
- Type-C data cable: 1 piece
- Certificate of Conformity: 1 piece
- Manual: 1 piece
Bluetooth connection operation guide
one: Mobile phone and other electronic equipment and stereo connection
- After the speaker is turned on, the bluetooth is turned on by default and can be searched for the connection status. The light flashes slowly (you can also press and hold the “Bluetooth button” for 2 seconds to reset, which will disconnect the audio from the previous device).
- Turn on the bluetooth of the main control device such as the mobile phone, enter the bluetooth search interface, until the bluetooth name of “MY301” is searched, and then click to connect.
- If the connection is successful, the speaker will emit a “bubble” prompt sound, and the blue indicator light of the speaker will stop flashing and turn to a constant light state.
Note: If you need to replace the main control device such as a mobile phone and connect it to the audio, please press and hold the “Bluetooth button” for 2 seconds to reset and search and pair again.
Two: Network pairing (applicable to two audio TWS inter connection)
- Arbitrarily choose one of the speakers as the “master” ‘, and the other speaker as the “secondary”
- Turn on the main speaker and press and hold the “Bluetooth button” for 5 seconds (the main speaker will disconnect from any previous devices), the speaker will emit a “tick tick” prompt sound, And the blue indicator light of the main speaker will “flicker quickly” (it will automatically exit after 3 minutes without successful networking), and the main speaker has turned on the networking mode at this time.
- The sub-audio is turned on, and the sub-audio can be searched by bluetooth, and it will automatically connect with the main audio network (if the sub-audio is occupied by other devices Please press and hold the “Bluetooth button” for 2 seconds to reset).
- After the network connection is successful, the “tick tick” sound of the main speaker will turn back to the “heartbeat” sound, and the blue indicator light will change from “fast flash” to” slow flash”.’. The secondary speaker emits a “bubble” sound and the blue indicator light stops flashing and stays on (the secondary speaker has been connected to the main speaker)..
- At this time, turn on the Bluetooth of the mobile phone and other electronic devices, enter the Bluetooth search interface, until the Bluetooth name of “MY301” is searched, click and the main speaker Just make the connection.
Note: If you need to exit the “networking mode” , please reset the auxiliary device (press and hold the auxiliary audio “Bluetooth button” for 2 seconds).
Precautions
-
Do not expose the speaker to sunlight or use it in a high temperature and humid environment to avoid circuit damage.
-
Please place the speaker in a dry and ventilated place when not in use.
-
Do not disassemble, modify, replace or repair the speaker during use to avoid safety accidents.
-
The speaker has a built-in battery, so it should not be used in dangerous situations such as violent vibration, collision or falling.
-
After each use, in order to avoid power consumption, press and hold the power button on the speaker to shut down, and charge the product regularly to protect the battery Please clean the speaker regularly. If there is foreign matter on the diaphragm, please use a fine brush or a dust-free cloth to gently wipe it clean, and avoid using cleaners with chemical components.
Lotions and other bleaching agents, etc. -
Please touch the upper and lower diaphragms of the speaker with sharp obiects by mistake so as not to pierce the diaphragm.
-
Please adjust the volume properly, and the human ear should keep a corresponding distance from the speaker to avoid hearing damage.
-
This product is not a toy product, buyers and users please supervise and guide relevant children to misuse it as a toy, not recommended for children under 14 years old Use alone.
Environmental statement
This form is prepared according to the provisions of SJ/T 11364
: Indicates that the content of the hazardous substance in all homogeneous
materials of the part is within the limits specified in GB/T 26572 below the
specified limit requirements.
: Indicates that the content of the hazardous substance in at least one
homogeneous material of the part exceeds GB/T26572, and there is currently no
mature alternative in the industry, which complies with the EU RoHS Directive
environmental protection: requirements.
The numbers in this mark indicate that the environmental protection use period
of the product under normal use is ten years. Some parts may also have an
environmental protection use period mark, this environmental protection use
year The limit is subject to the number in the logo. Depending on the model,
the product may not include For all the above components outside the host,
please refer to the actual sales configuration of the product.
Warranty Card
User information
Warranty
- When the user purchases the machine, a manual and a warranty card are included with it. After the user fills in, please keep it properly as a warranty certificate.
- From the date of purchase, if the product has quality problems under normal use within one year, the user can enjoy free maintenance services with this warranty card.
- The following does not belong to the scope of warranty: The warranty card has no signature or seal of the sales unit Damage caused by man-made or irresistible factors; * The machine is normal wear and tear.
- If the failure is caused by man-made, exceeding the warranty period and irresistible factors, we will charge appropriate parts costs and waive labor costs.