imperii SmartWatch Pro with SIM card and Camera User’s Manual

imperii SmartWatch Pro with SIM card and Camera User’s Manual

Safety warnings

• Please read carefully this user’s manual before using your SmartWatch Pro.
• Use only the supplied battery, charger end accessories. The manufacturer shall not be liable for any damages derived from third-party accessories.
• Any non-authorized unmount of the SmartWatch is strictly forbidden. Any non-authorized unmount shall imply a guarantee void
• Do not expose it to vibrations or shocks. Do not hit the screen with metal objects.
• Do not use solvents like benzene to clean the shell. Avoid contact with corrosive chemical agents. Use a clean, smooth doth for cleaning.
• Do not expose your SmartWatch to direct sunlight or dusty or smoky environments.
• Keep your SmartWatch dry. Do not use it in humid environments like a bathroom. It is not waterproof, rain and humidity can affect it. Please keep your SmartWalch out of children’s reach.

INTRODUCTION

SmartWalch components

1. Loudspeaker
2. USB port/headset
3. On/off button.
4. Camera

Battery removal, installation of SIM card and Micro SD card

• Remove the Smartwatch rear lid. Help yourself with the flap you’ll and in its upper left corner.

• Remove the battery. After removal, you’ll see the slots for SIM and MicroSD cards.

• Insert the SIM card (MicroSIM format) in the slot on the right To do so, slide up the metal plate until it clicks for releasing the lock. Place the SIM card with its chip on the SmartWatch connector pins for a perfect fit.
  Take down the metal plate and lock it by sliding the plate down until it clicks.

• Insert the MicroSD card (up to 8 GB capacity) in the left slot of the
  SmartWalch by inserting the pin connectors in the slot.

• Place the battery and the lid of the SmartWatch back in their original
  place and if ll be ready for use.

WATCH FUNCTIONS

This phone supports quad-band Micro SIM cards (850MHZ, 900MHZ. 1800MHz and 1900MHZ) and memory expansion with Micro SD (TF) cards. You can use its Bluetooth connectivity for synchronizing music, calls, call historical and agenda from your iPhone or Android smartphone. You can also synchronize your Android smartphone notifications including SMS. e-mail, Skype, Twitter, Whatsapp, etc. It also includes alarm, agenda, MP3 player, pedometer, photo and video camera among other features.

2.1 Power on and main Interface

1. Smartwatch power on and off:
To power on your SmartWatch, keep pressed fora few seconds its main button, which is located under the screen. The SmartWatch pmvers on with a melody and a welcome image on the screen. To power the SmartWatch off, keep pressed its main button for a few seconds. The SmartWatch powers off.
NOTE: Make sure the SmertWatch is charged. If the terminal does not power on, then most likely its battery is depleted.

2. Clock:
When the SmarfWatch is idle, the screen turns off to save energy. When the main button is pushed, the clock appears and shows the time. You can choose among 3 different analogue clock designs, end toggle them easily by tapping on the SmartWatch touchscreen while the clock is shown. To unlock the SmartWatch , slide one finger on the screen
while the clock is shown. To lock it back, press the main button (short push).

3- Main interface:
On the main interface appear time (digits), date, call icon, contacts icon, menu and tools.

• Call: By tapping on this icon you’ll access the SmartWatch dial-up interface. Dial a phone number and make a call from your SmartWatch by pressing the “call” button (green button located down in the middle of thedial)
• Contacts: Tap on the contacts icon to access your phone guide. To access you need to be connected to your Smartphone via Bluetooth or have an operating SIM card installed in your SmartWatch with your contact guide.
• Tools: Quickly access your favourite apps. By default you’ll find quick accesses to VIP contacts, Alarm, FM Radio and Music. You can configure quick accesses in Settings.
• Menu: By tapping on “Menu” you’ll access the Smartphone app and settings pages.

SMARTWATCH MENU AND AP PS

• Page 1: Messaging, Call Registry, Bluetooth, BT Dialer
• Page 2: Remote notifier, Remote capture, Anti-loss, Settings
• Page 3: Pedometer, Sleep Monitor, Physical Inactivity Alert, QR Code
• Page 4: Finder, Alarm, Calendar, Calculator
• Page 5: User profiles. FIie Manager, Music Player, Themes. Music Player
• Page 6: FM Radio, Camera, Video Recording, Image Viewer
• Page 7: Video Player, Sound Recorder, Explorer, SIM Toolkit
• Page 8: Facebook, Twitter

You can move apps from their place and page by tapping on the icon for a few seconds and dragging it to the desired place.
NOTE: For a more efficient and comfortable use of your SmartWatch, configure it to your language. The default language i& English, follow these steps to change the language, Menu –>Settings–> Phone Settings–> Language–> Choose your language from the list .

Messaging

Available only with an inserted SIM card. Write, send and receive SMS in your SmartWatch. To access sent and received messages from your smartphone, you need the BTNotification APK (available only for Android).

Bluetooth and Bluetooth Dialer

Configure Bluetooth from the “Bluetooth” app, no need to do it from the settings menu. You can rename the device, power Bluetooth on and off and toggle state between “visible” and •not visible”.
Use the BT Dialer app to find new devises available for a quick link or to link with available devices to which you already connected before.
If connecting for the first time, select “Find new device”, wait until it appears on the list, select it and accept linking from both devices. From now on they will link automatically when both of them have Bluetooth on.

3.3 Pedometer, Sleep Monitor, Physical Inactivity Alert

Activate the pedometer to start counting steps. You can pause or resume the counter.
Use the sleep monitor to analyse the hours of sleep and the quality of sleep. The SmartWatch incorporates a movement sensor which registers involuntary movements during sleep time and registers ~good~, “bad” or ‘average” quality sleep.
NOTE: Both apps use the same sensor, therefore you cannot use them at the same time. Activate physical inactivity alerts: You can program the SmartWatch to alert you when you spend too much time without walking, to always Keep you a task.

Calendar

Besides querying your calendar, you can also add entries and configure sound alerts to remind you of any tasks you add. To do so, tap on the day you wish an entry to be added, select Options and then Add. Fill in the
fields and configure an alarm (optional) to make It sound whenever you wish to never forget a task.

File Manager

Manage, delete, copy or move files from your phone memory or your MicroSDcard.

Explorer, Facebook and Twitter

You can access a simple internet explorer interface, Facebook and Twitterwith your SmartWatch. To access internet you need a SIM card in your smartphone that includes a data plan in your carries service. You may have to manually configure internet data access, follow these steps:

• Go to the Settings menu of your SmartWatch
• Open Connectivity options and then “Data accounts·.
• If your carries profile does not appear by default, you’ll have to add it manually. Tap on ·options” and then “Add Profile’.
• Enter your carries AFN data (address, user name and password). You can find this data on your carries web page or request support from your carrier.
• If the data entered is correct, you can use the apps that require an intranet connection.

Audio Player

You can listen to music or configure a tune as a dial tone with the internal audio player. warning: You can only play MP3 flies that are saved In the root directory “My music”, which is automatically created in the MicroSD card when inserted in the SmartWatch. Select a proper volume for your music to avoid ear injuries.

FM Radio

To listen to your favorite radio station, plug the headset connector in the MicroUSB port. The headset cable also works as antenna, so It is better to let it hang freely.

Reset defaults Settings

When selecting this option, the original settings from the manufacturer are restored in the phone. You need a password for this. The default password is”1122”.

INSTALLING THE APK (available for Android only)

For the synchronization service to work (and therefore receiving notifications from your smartphone in your watch) first you have to install an APK. This option is available only for Android smartphones. To download this APK you can search in Play Store for this app: BTNOTIFICATION. From the listed results, download the one that has
this icon:

If this app does not appear in Play Store, you can alternatively download it by scanning its two-dimensional or QR code from the watch itself. On page 3 of the SmartWatch is the Quick Response icon. tap on it and you’ll get a two- dimensional code that you can scan with your smartphone to download the APK and then install it in your phone. After download, activate the app to start using it.

To synchronize the smartphone push notifications with your watch, tap on the APK icon to open it. First make sure to connect the watch to your phone via Bluetooth.

In the app, tap on “Accessibility Settings• to activate notifications via Bluetooth. When “ON’ appears, the notifications are active.
Tap on “BT Notifications’ to choose which apps are to send notifications to the watch.
If you have problems with the application, we suggest you try an alternative apk called “smart watches”. You will find the QR code to download and use manual at the fallowing address: http://www.imperiielectronics.com/manual- user.html

SMARTWATCH USAGE WITH 105

An app for iOS compatible with independent SmartWatches has not been developed, therefore iPhone features are limited. You can use most of the SmartWatch features by inkling n with your iPhone via Bluetooth. However, as there is no app, you can neither receive notifications nor use the following features, which need to have the app installed:

• Bluetooth SMS (access to the iPhone SMS trays)
• Remote Notifier
• Remote Capture

TROUBLESHOOTING

Should any problem arise when using your SmartWatch, follow these instructions. If the problem persists, contact your distributor or an authorized technical support.
The SmartWalch does not power on.

• Push the power on button until the start-up screen appears
• If it does not power on, your battery may be depleted. Check your battery charge level or let it charge before trying to power on your SmartWatch again.
• Check for bad contacts of your battery. Remove it and place it back in its place.

The watch freezes for several minutes

• Push the power off button.
• Remove the battery and place it back again. Power the device on.

Battery life Is too short

Please make sure your screen savers are not disabled (settings). Make sure you charge your battery for a long enough time {more than three hours).
If you do not fully charge your battery, the charge indicator might not be accurate. Please wait for up to 20 minutes after disconnecting the battery charger to get an accurate reading of the battery status.

The device does not connect to the network

• Please try another location.
• Check there is no supply outage from your carrier.
• Check with your carrier that your SIM card works property.
• Try to manually select the network (see section 3.6 of this manual)
• Try again later in case the network is saturated.

I cannot dial from my SmartWatch

• Make sure the phone number Is correct and push the call button.
• For internet calls, check the country prefixes and area.
• Please check your phone network works property.
• Make sure you have enough card balance (in case it is a prepaid card).
• Check with your service provider to make sure your account is OK (credit limit. SIM validity, etc.).
• Make sure you have not established a call limit.
• Check your phone is not configured to only use numbers from the agenda.

I cannot play music

• Please check whether the music file format is valid.
• Check you have not deleted the music file. You can update your playlist to check it is in the folder’My music”.

I cannot synchronize my SMS messages

•  Make sure you have downloaded and installed the APK opp in your Android phone (it does not work on iOS).
• Check you have activated the Bluetooth notification feature.

Limited Warranty

✓This product is guaranteed for 2 years from the date of purchase.
✓ Warranty is effective since the commercial invoice duly is filled and sealed settlement.
✓ If there is any problem with the product, the user should contact us in the adress: sat@imperiieleclronics.com. Once received, the doubts, incidents and problems will be resolved by email. If this is not possible and the problem persists, the guarantee will be processed in accordance with current law.
✓ The warranty is extended for two years, referring only 10 manufacturing defects
✓ The expedition to the nearest service center or our central office lo be made prepaid. The item must
arrive well packed and with all its components.
✓ Assume no liability for damages arising from misuse of the product
✓ The warranty does not apply in the following cases:

1. If you have not been followed this manual correctly
2. If the product has been tampered
3. If it has been damaged by improper use
4. If the defects have arisen as a result of power failures

PRODUCT__
MODEL____
SERIES____

TECHNICAL SERVICE : http://imperiielectronics.com/index.php?controller=contact

imperii SmartWatch Pro with SIM card and Camera User’s Manual – Download [optimized]
imperii SmartWatch Pro with SIM card and Camera User’s Manual – Download
imperii SmartWatch Pro with SIM card and Camera User’s Manual – OCR PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>