CMA DISHMACHINES CMA-180 VL Single Rack High Temperature Straight Dishwasher Instruction Manual

: June 10, 2024
: CMA Dishmachines

Table of Contents

CMA DISHMACHINES CMA-180 VL Single Rack High Temperature Straight
Product Information
Exploded View Drawings
Product Usage Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)
00121.17 includes #00121.18

CMA DISHMACHINES CMA-180 VL Single Rack High Temperature Straight

Dishwasher

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-product

Product Information

The CMA-180 VL/180 VLTall is a dishwasher machine produced by CMA Dishmachines. It has a parts manual that contains an initial parts kit of 32 items and an exploded view drawing that shows the parts required for assembly. The dishwasher has a straight frame system assembly and a heat recovery system.

Initial Parts Kit #1100.16

Description	Qty
CMA-180 Drain Stopper	1
Pump Assy. 115/220V 60Hz (Open)	1
Pump Seal Kit	1
Rinse Arm w/ Bearings	1
Spray Arm Assy w/bearing & end plugs	1
Spray Base Pull Lock Pin	1
Contactor 208/240V 20 Amp	1
CMA-180VL Timer Assy	1
Micro Switch	1
Illuminated Plug CMA-180/44 P	1
Rocker Switch Auto Fill	1
Power Switch Red 250V	1
Toggle Switch DPDT 15 Amp/Delimer	1
Roller Door Switch	1
Door Spring	1
Ice Cube Relay 220V 12 Amp	1
3/4 Water Solenoid Repair Kit JE	1
1/2 Water Solenoid Repair Kit JE	1
3/4 Vac Breaker Rep Kit Watts	1
Solenoid Coil JE 220V (3/4 & 1/2)	1
Wash Thermometer. (Rinse PN3202.18)	1
Counter – Face Mount 220V/50Hz	1
Toggle Switch (Momentary) Screw Term	1
Contactor 60 Amp 3 Pole	1
Contactor 30 Amp	1
SS Final Rinse Spray Jet SS	1
Heater Thermostat	1
Immersion Heater 240V/12kW T-Flange	1
Liquid Level Switch-Long-D Flat	1
Pressure Gauge(PN13605.45 MFG after Jan 2020)	1
Immersion Heater 6kW208-240V T-Flange	1
Hi Limit Switch 250 Deg	1

Exploded View Drawings

Straight Frame System Assembly

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-1

Item No.	No. Req’d	P/N	Description
1	1	17532.18	Frame Stand Left
2	1	17506.37	Door Ventless Right
3	1	17506.38	Door E Z Door Glide
4	6	00636.17	Door Guide
5	6	17554.00	Corner Tray Track Rail
6	2	17552.00	Tray Track (EST/EC/180)
7	1	01505.16	Door Service Splash Guard
8	1	01505.10	Strainer Basket
9	1	17506.65	Scrap Body SS
10	2	17510.00	Scrap Trap Drawer
11	1	17579.00	Scrap Trap Holder Overflow
12	1	17511.00	Overflow Gasket 3-Dr Bracket outside Style
ITEM NO.	NO. REQ’D	P/N	DESCRIPTION
NO. REQ’D	P/N	DESCRIPTION
---	---	---	---
1	1	17532.18	Frame Stand
2	1	17506.37	Left Door
3	1	17506.38	Ventless Right Door
4	6	00636.17	E Z Door Glide
5	6	17554.00	Door Guide
6	2	17552.00	Door Stop
7	1	01505.16	Corner Tray Track Rail

Wrapper
8| 1| 01505.10| Tray Track (EST/EC/ 180)| 24| 1| 17531.00| Pan
9| 1| 17506.65| Door Service Splash Guard| 25| 2| 17506.60| Door Panel Splash Guard
10| 2| 17510.00| Strainer Basket| 26| 1| 17506.62| 180 Splash Shield – lever side
11| 1| 01579.10| Scrap Body SS| 27| 1| 17546.00| CMA-180VL Skirt
12| 1| 01579.20| Scrap Trap Drawer| 28| 1| 00449.50| Keyless Lock
13| 1| 17579.00| Scrap Trap Holder| 29| 1| 17506.36| Front Door
14| 1| 17511.00| Overflow| 30| 2| 17530.45| Frame Support Bar
15| 1| 17402.00| Overflow Gasket| 31| 4| 01572.10| SS Leg (A, AH, C, B)
16| 1| 01516.50| 3-Dr Bracket outside Style| 32| —| 01145.00| Leg Assembly, 10” w/Bullet Foot

Heat Recovery System

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-2

Item No.	No. Req’d	P/N	Description
1	1	17595.00	CMA-180VL Skirt
2	1	02401.01	Keyless Lock
3	1	02401.17	Front Door Frame
ITEM NO.	NO. REQ’D	****

P/N

| ****

DESCRIPTION

---|---|---|---
1| 1| 17595.00| CMA-180 Ventless Top Cover
2| 1| 02401.01| Motor Fan 230V, 50/60Hz
3| 1| 02401.17| Battery Self Cleaning Pipe Incl 6-#15
4| 1| 17593.00| CMA-180 Ventless Fan Mount
5| 1| 02401.05| Heat Recovery Battery
6| 1| 17596.00| CMA-180 Ventless Rear Cover
7| 1| 17598.00| CMA-180 Ventless Support L.H.
8| 1| 17597.00| CMA-180 Ventless Support R.H.
9| 2| 40014.00| 1/2m x 1/2 Barb Straight
10| 3| 03101.45| Hose Clamp #4
11| 1| 17592.00| CMA-180 Ventless Drain Pan
ITEM NO.| NO. REQ’D| ****

P/N

| ****

DESCRIPTION

---|---|---|---
12| 1| 03101.00| Hose Clamp #16 1”
13| 1| 15605.00| Drain Hose with Goose Neck (9-06)
14| 1| 17591.00| CMA-180 Ventless Wrapper
15| 7| 02101.01| Stainless Steel Rinse Nozzle
16| FT| 03107.51| Flexible Black Hose 3/8″ Order per foot
17| FT| 03107.50| Flexible Black Hose ½” Order per foot
18| 1| 17594.00| CMA-180 Ventless Shroud
19| 1| 06231.15| CMA Ventless Label 23.25 x 3.25
20| 1| 17599.15| Heat Recovery Battery Insulation
21| 6| 00982.00| Phillips Truss Screws
22| 6| 00981.00| Nylon Pop-in Nut

Product Usage Instructions

To use the CMA-180 VL/180 VLTall dishwasher machine, follow the below instructions:

Ensure that all required parts are present and in working condition.
Assemble the machine according to the exploded view drawing in the parts manual.
Connect the machine to a power source and ensure that it is grounded.
Turn on the power switch.
Fill the machine with water using the auto fill rocker switch.
Load dishes into the machine and close the door.
Select the appropriate wash cycle using the timer assembly.
Monitor the machine during the wash cycle to ensure that it is operating correctly.
After the wash cycle is complete, open the door and remove the dishes.

Drain System Assembly (Ventless Unit)

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-3

ITEM NO.	NO. REQ’D	P/N	DESCRIPTION
1	1	00113.17	Drain Tee Casting
2	1	00114.00	Drain Tee Gasket
3	1	00121.18	Drain Stopper “O” Ring
*4	1	00121.17	Drain Stopper
5	1	17581.00	Drain Linkage
6	1	17580.50	Drain Linkage Spacer
7	1	00912.00	¼-20 Nylon Lock Nut
8	1	17580.00	Drain Lever
9	1	00910.00	¼”-20 x 1 ½” Hex Head Bolt
10	16	00926.00	5/16 S/S Washer
11	6	00901.00	5/16 –18 x 1” Hex Head Bolt

00121.17 includes #00121.18

ITEM NO.	NO. REQ’D	P/N	DESCRIPTION
12	6	13805.00	5/16-18 Nylon Lock Nut
13	1	01313.00	2” PVC Slip x MIPT Adapter
14	1	05030.17	2” x 4” PVC Tubing
15	1	01312.00	PVC Slip x Slip 90 Elbow
16	1	05030.27	2” x 6” PVC Tubing
17	1	01320.17	2” PVC Tee SxSxS
18	1	05030.10	2” x 3” PVC Tubing
19	1	01315.17	2” No Hub
20	1	50302.42	180VL Drain Hose Fitting
21	1	03101.00	Hose Clamp #16 1”
22	1	15605.00	Drain Hose with Goose Neck

Plumbing System Assembly (January 2020)

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-4

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION| | ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---|---|---|---|---|---
1| 1| 00710.50| Vacuum Breaker ¾” Watts| 12| Per FT| 03107.51| Flexible Black Hose 3/8”
1A| —| 00421.51| Pan Head Screw SS 6-32 x 1/4”| 13| 1| 40014.10| 1/2m x 3/8” Barb Straight
1B| —| 00735.60| Vacuum Breaker Brass Bonnet ¾”| 14| 1| 13642.00| 1/2″ MIP Plug Brass Sq. Head
1C| —| 00735.00| Vacuum Breaker Repair Kit ¾”| 15| 8| 03614.00| Nipple Brass 1/2″ Close
1D| —| 00739.50| Vacuum Breaker Cap| 16| 3| 00743.10| Tee ½” FxFxF
2| 1| 00704.00| Street Elbow 3/4″ 90Deg| 17| 1| 40014.00| 1/2m x 1/2″ Barb Straight
3| 1| 13613.00| Nipple ¾” x 5 ½” Brass| 18| 1| 13602.20| Pressure Regulator 1/2
4| 2| 13606.10| Jamb Lock Nut Thin Pattern| 19| Per FT| 03107.50| Flexible Black Hose ½”
5| 2| 13639.00| Nipple SS 3/4 x Close| 20| 2| 41062.00| 1/2″ Strainer Ball Valve
6| 2| 13633.00| 3/4 90 Elbow FxF Brass| 21| 2| 01528.00| Plumbing Support Bracket
7| 6| 00912.00| 1/4-20 Nylon Lock Nut| 22| 2| 00924.00| 1/4 SS Washer
8| 4| 00912.00| 1/4-20 Nylon Lock Nut| 23| 2| 00906.00| 1/4-20 X 1/2 Hexhead Bolt
9| 3| 01526.10| Plumbing Bracket Strap| 24| 2| 40116.00| 1/4 Comp x 1/4 MIP Fitting
10| 1| 01526.00| Plumbing Support Bracket| 25| 1| 13604.00| 1/2 x 1/4 Bushing Brass
11| 3| 03603.15| 1/2 Solenoid Valve JE 240V/60Hz| 26| 1| 00425.24| Chemical Tubing
11A| 1| 00738.15| Water Sol Valve Coil 220V| 27| 1| 13618.11| Coupling ¼” Brass
11B| —| 03603.20| Water Sol Valve Bonnet ½”| 28| 1| 13605.45| Pressure Gauge
11C| —| 00786.00| Water Sol Plunger ½” & ¾” w/spring| 29| 1| 03202.00| Wash Thermometer
11D| —| 00707.00| Water Sol Repair Kit JE ½”| 30| 1| 03202.18| Final Rinse Thermometer

Plumbing System Assembly

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-5

ITEM NO.| NO. REQ’D| P/N| DESCRIPTION| | ITEM NO.| NO. REQ’D| P/N| DESCRIPTION
---|---|---|---|---|---|---|---|---
1| 1| 00710.50| Vacuum Breaker ¾” Watts| 13| 1| 40014.10| 1/2m x 3/8” Barb Straight
1A| —| 00421.51| Pan Head Screw SS 6-32 x 1/4”| 14| 1| 13642.00| /2″ MIP Plug Brass Sq. Head
1B| —| 00735.60| Vacuum Breaker Brass Bonnet ¾”| 15| 8| 03614.00| Nipple Brass 1/2 Close
1C| —| 00735.00| Vacuum Breaker Repair Kit ¾”| 16| 3| 00743.10| Tee ½” FXFXF
1D| —| 00739.50| Vacuum Breaker Cap| 17| 1| 40014.00| 1/2m x 1/2 Barb Straigh
2| 1| 00704.00| Street Elbow 3/4″ 90Deg| 18| 1| 13602.20| Pressure Regulator 1/2
3| 1| 13613.00| Nipple ¾” x 5 ½” Brass| 19| FT| 03107.00| Flexible Black Hose ½”
4| 2| 13606.10| Jamb Lock Nut Thin Pattern| 20| 2| 41062.00| ^1/2 Strainer Ball Valve
5| 2| 13639.00| Nipple SS 3/4 x Close| 21| 2| 01528.00| Plumbing Support Bracket
6| 2| 13633.00| ^3/4 90 Ell F x F Brass| 22| 2| 00924.00| 1/4 SS Washer
7| 6| 00912.00| 1/4-20 Nylon Lock Nut| 23| 2| 00906.00| 1/4-20 X 1/2 Hexhead Bolt
8| 4| 00912.00| 1/4-20 Nylon Lock Nut| 24| 2| 40116.00| 1/4 Comp x 1/4 MIP Fitting
9| 3| 01526.10| Plumbing Bracket Strap| 25| 1| 13604.00| 1/2 x 1/4 Bushing Brass
10| 1| 01526.00| Plumbing Support Bracket| 26| 1| 00425.54| Chemical Tubing
11| 3| 03603.15| 1/2 Solenoid Valve JE 240V/60Hz| 27| 1| 13618.11| Coupling ¼” Brass
11A| 1| 00738.15| Water Sol Valve Coil 220V| 28| 1| 13605.45| Pressure Gauge 180-UC
11B| —| 03603.20| Water Sol Valve Bonnet ½”| 29| 1| 03202.00| Thermometer “Wash”
11C| —| 00786.00| Water Sol Plunger ½” & ¾” w/spring| 30| 1| 03202.18| Thermometer “Rinse”
11D| —| 00707.00| Water Sol Repair Kit JE ½”| 31| 1| 17534.50| Gauge Bracket
12| FT| 03107.51| Flexible Black Hose 3/8”|

Wash Spray System

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-6

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---
1| 1| 00303.17| Manifold
*2| 1| 00360.24| Lower Spray Base Assembly
3| 1| 00361.10| Upper Spray Base Assembly
4| 2| 00304.17| Wash Spray Arm
5| 4| 00308.50| Spray Arm End Plug SS
6| 2| 00302.51| Spray Base “O” Ring
7| 4| 00905.00| Truss Head Bolt ¼”-20”x1/2”
8| 12| 00924.00| SS Washer ¼”
ITEM**

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---
9| 8| 00912.00| Nylon Lock Nut ¼” – 20
10| 4| 00914.10| Hex Head Bolt ¼”-20”x5/8”
11| 2| 00966.10| Hex Head SS Bolt 10-32
12| 4| 00363.00| Spray Base Lock Pin
13| 1| 00302.00| Spray Base Gasket
14| 1| 00225.00| Compression Gasket
15| 1| 00221.20| 1” Comp. Fit.x1”MIP SS
16| 1| 00759.17| Base Quick Release W/Nipple
17| 2| 00341.00| Spray Arm Bearing

P/N 00361.10 Includes Items 11,12 & 6
P/N 00360.24 Includes Items 11, 12 & 6

Final Rinse System Assembly

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-7

ITEM NO.| NO. REQ’D| P/N| DESCRIPTION| | ITEM NO.| NO. REQ’D| P/N| DESCRIPTION
---|---|---|---|---|---|---|---|---
1| 1| 17401.00| Final Rinse Manifold| 15| 1| 03624.00| ½” Vacuum Breaker
2| 2| 04306.00| Square Manifold Gasket (CMA-180)| 15A| —| 03623.00| ½” Vacuum Breaker Kit
3| 1| 13607.40| 180VL Final Rinse Pipe Ass.| 15B| —| 03624.25| ½” Brass Bonnet
4| 6| 00914.00| ¼”-20×5/8 Hex Bolt| 15C| —| 00739.50| ¾” Vacuum Breaker Cap
5| 4| 00308.17| Rinse Arm SS End Plug| 15D| —| 00421.51| 6-32 x ¼” SS Pan Head Screw Phillips
6| 2| 00304.29| Rinse Arm w/ Bearings (180&180UC)| 16| 1| 00760 .00| 5/8 Comp x 1/2 MIP Adapter
7| 6| 00912.00| ¼”-20 Nylon Lock Nut| 17| 1| 13607.44| 180VL Rinse Plumbing Line
8| 6| 00924.00| ¼”SS Washer| 18| 1| 17550.11| 1/2 90Deg Street Elbow
9| 1| 13607.20| 3/8 Compression Fitting Sleeve| 19| FT| 03107.00| Flexible Black Hose ½”

Order per foot

10| 1| 05004.11| 3/8” SS Tubing| 20| 1| 03101.45| Hose Clamp #4
11| 1| 00436.20| 3/8″ Comp X 1/2″ MIP Fitting| 21| 1| 40014.00| 1/2m x 1/2 Barb Straight
11A| 1| 13607.10| 3/8 Compression Fitting Nut| 22| 1| 00743.00| 1/2 Tee F x F x F Brass (Plated)
12| 1| 13669.45| Mixing Chamber SS CMA 180UC| 23| 1| 13642.00| 1/2″ Male Plug Brass
13| 1| 03232.00| 1/8 Male Plug| 24| 1| 4305.17| Red Silicone Gasket (CMA-180)
14| 1| 13629.00| ½” S.S. Close Nipple| 25| 1| 13607.55| CMA-180VL F.R.

Thermometer Fitting

| 26| 1| 15606.00| Conduit Heat Shield

CMA-180 Door Handle Assembly

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-8

ITEM NO.| NO. REQ’D| P/N| DESCRIPTION| | ITEM NO.| NO. REQ’D| P/N| DESCRIPTION
---|---|---|---|---|---|---|---|---
1| 1| 00613.32| Door Handle| 13| 4| 00610.00| Door Handle Spacer (Small)
2| 1| 01556.50| Right Door Handle Support| 14| 4| 00611.00| Door Handle Spacer (Large)
3| 2| 00603.07| Door Spring Extension Rod| 15| 2| 00607.04| Door Handle Cap
4| 2| 00602.00| Door Spring| 16| 1| 01555.50| Left Door Handle Support
5| 2| 17552.00| Door Stop| 17| 2| 00910.00| ¼”-20×1/2” Hex Head Bolt
6| 2| 01553.00| Door Handle Link| 18| 1| 00563.40| Door Switch Bracket (8-08)
7| 2| 00606.50| Turn Buckle| 19| 1| 00563.42| Door Switch Actuator (8-08)
8| 2| 00926.00| 5/16” SS Washer| 20| 1| 00562.00| Door Roller Switch
9| 2| 00900.00| Cotter Pin| 21| 1| 00562.60| Connector Door Roller Switch
10| 4| 00906.00| ¼”-20 x ½” Hex Head screw| 22| 1| 00605.30| Door Rod Spacer
11| 8| 00924.00| ¼” SS Washer| 23| 1| 00546.00| 18 AWG Switch Cord
12| 8| 00912.00| ¼”-20” Nylon Insert Lock Nut|

Pump System Assembly

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-9

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION| | ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---|---|---|---|---|---
1| 1| 00201.00

00201.85

| Pump Motor 1 HP115/230V

Pump Motor 1 HP230/460V

| 8| 1| 00208.40| Slip Joint Nut Gasket
2| 1| 04207.10| Small Pump Base| 9| 1| 04204.00| Compression Nut (2.5)
3| 6| 00921.00| 3/8”-16 x 34” Hex Head Bolt| 10| 2| 00906.00| ¼-20 x 1/2” Hex Bolt
3A| 2| 00975.00| 3/8-16 x 1 ½” Stud| 11| 2| 00924.00| ¼” SS Washer
4| 1| 00206.30| Pump Seal Kit| 12| 2| 00912.00| ¼”-20 Nylon Lock Nut
5| 1| 03226.00| Pump “O” Ring| 13| 2| 00238.00| 3/8” Male Plug
6| 1| 03222.10| Impeller SS| 14| Assy.| 00200.10| Pump Assy
7| 1| 04207.20| Pump Cover| 15| 1| 00208.21| Slip Joint Nut Friction Ring
| P/N 00200.85 Includes Items 1,2,3,4,5 and 6

Wash Tank Heater (Triangular Flange)

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-10

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---
1| 1| 15518.00

13422.76

| Heater 6kW 220V Triangular Flange

Heater 6kW 480V Triangular Flange

1A| 1| 13417.92| Heater Thermostat
2| 1| 13463.14| Liquid Level Switch
3| 1| 13463.51| Liquid Level Switch Shield
4| 1| 17523.51| Hi-Limit Switch – Wash 250 Degrees
5| 1| 13477.20| 7/8” Probe Hole Plug
6| 1| 15518.11| Gasket for Triangular Flange Heater

Booster Tank Heater (Triangular Flange)

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-11

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---
1| 1| 17550.20| Booster Tank
2| 3| 13805.00| Nylon Lock Nut 5/6”-18
3| 3| 00926.00| Washer SS 5/16”
4| 1| 13422.71

13422.75

| 240V 12KW Triangular Immersion Htr

480V 12 kW Triangular Immersion Htr

4A| 1| 13417.92| Thermostat 12KW Heater
5| 1| 17523.51| Hi-Limit Switch-Booster 250 degrees
6| 1| 17520.00| Booster Heater Shield
7| 1| 15518.11| Gasket for Triangular Flange Heater
8| 1| 17560.00| Complete Assembly
9| 1| 40116.00| 1/4 Comp x 1/4 MIP Fitting

Control Box Assembly

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-12

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---
1| 1| 17503.39| CMA-180 Control Box Body
2| 2| 00470.10| Toggle Switch Rubber Boot
3| 1| 00409.93| Timer CMA-180
3A| 1| 00500.20| Timer Motor
4| 1(2)| 00631.05| Ice Cube Relay 220V
5| 6 Ft.| 00400.85| Conduit ¾” Sealtite
6| 6 Ft.| 00400.10| Conduit ½” Sealtite
7| 2 Ft.| 00400.00| Conduit 3/8” Sealtite
8| 1| 00401.85| St-3/4” Straight Connector
9| 1| 00401.10| St-1/2” Straight Connector
10| 1| 00401.00| St-3/8” Straight Connector
11| 1| 00475.70| Delimer Switch DPDT 15A
12| 1| 03470.00| Toggle Switch Momentary (Screw Terminal)
13| 8| 03801.00| Nylon Lock Nut 10-32
14| 1| 17400.06| Mountain Din Rail
15| 1| 13403.26| Fuse 3A/250V Slow Blow
16| 2| 00941.00| Pan Head Screw 10 -32 x 5/8”
17| 1| 17400.17| Terminal Block Assembly
17A| 2| 17400.04| 30 Amp Terminal Block-Red
17B| 3| 17400.03| 60 Amp Terminal Block-Black
17C| 4| 17400.02| 85 Amp Terminal Block-Natural
17D| 2| 17400.08| 30 Amp Terminal Block-Blue
17E| 2| 17400.09| 30 Amp Terminal Block-Natural| ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---
17F| 1| 17400.07| 60 Amp Terminal Block-Green
18| 1| 03408.55| Counter Face Mount 220V
19| 4| 00911.00| Pan Head Screw 8-32 x 1/2”
20| 4| 00927.00| Lock Nut 8-32
21| 1| 00421.90| Power Switch
22| 1| 00449.50| Keyless Lock
23| 1| 00421.89| Rocker Switch Auto Fill
24| 1| 00404.85| Motor Contactor 208/240V 20A
13003.55| Motor Contactor 30 Amp
25| 6| 13825.00| Pan Head Screw 8-31 x 1”
26| 6| 04806.00| #10 Brass Washer
27| 2| 17503.17| Control Box Sponge Long
27A| 2| 17503.18| Control Box Sponge Short
28| 1**| 13003.17| Contactor 60A 3 Pole 220V
29| 1| 13418.60| Dip Switch Timer 230V
30| 1| 13003.55| Heater Contactor 30 Amp
31| 1| 00562.60| Door Roller Switch Connector
32| 1| 00562.00| Door Roller Switch
33| 1| 13426.50| Ground Block
34| 1| 00421.78| Illuminated Plug
35| 1| 006231.19| Control Panel Label CMA-180
36| 1| 17503.29| Control Box Lid

Heat Recovery System Control Box

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-13

ITEM NO.	NO. REQ’D	P/N	DESCRIPTION
1	1	13905.23	Transformer Box Lid
2	1	13905.13	Transformer Box
3	1	13418.60	Dip Switch Timer 230 V
4	1	00631.05	Ice Cube Relay 220V 12 Amp
5	4	00940.50	10-32 X 3/8 Truss Head Screw
6	4	0013805	5/16-18 Nylon Insert Lock Nut
7	4	00926.00	5/16 SS Washer
8	2	00907.00	6-32 X 1/2 SS Panhead Screw
9	2	00965.00	6-32 Nylon Insert Lock Nut

Heat Recovery System Control Box 480V

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-14

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---
1| 1| 13905.24| Transformer Box Lid 180VL, 480V
2| 1| 13420.10| Fuse Clip 2-Poll, Pressure Plate
3| 1| 00631.05| Ice Cube Relay 220V
4| 2| 13402.10| Fuse 1.50 Amp, 480V Slow Blow
5| 1| 13905.14| Transformer Box 180VL, 480V
6| 1| 13423.82| Transformer 480V-240V
7| 2| 13403.40| Fuse 1.25 Amp, 230V Slow Blow
8| 4| 13403.21| Fuse Holder – Inline
9| 1| 13418.60| Dip Switch Timer 230 V
10| 4| 00940.50| 10-32 3/8 Truss Head Screw

Door Safety Interlock (DSI) Assembly P/N 17712.84

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-15

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION| | ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---|---|---|---|---|---
1| 1| 03801.40| 10-32 x 1/2 Cone Screw| 8| 1| 17712.50| Solenoid Spring
2| 1| 17712.30| DSI Cover| 9| 1| 17711.11| CMA-180VL Interlock Bar
3| 5| 00927.00| 8-32 Nylon Lock Nut| 10| 4| 00912.00| 1/4-20 Nylon Lock Nut
4| 1| 00902.00| 8-32 X 1 1/4 Panhead Bolt| 11| 4| 00924.00| 1/4-20 Nut w/ Grip Washer
5| 1| 17712.35| DSI Mount| 12| 4| 00906.00| 1/4-20 X 1/2 Hexhead Bolt
6| 4| 00970.60| 8-32 x 1/2 Flat Screw| 13| 1| 00562.60| Roller Door Switch
7| 1| 00100.05| Drain Ball Solenoid 240V| 14| 1| 00547.00| Switch Cord 18 AWG
| 15| 1| 01550.00| Solenoid Stop

Unique Parts For CMA-180VL-T

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-16

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION| | ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---|---|---|---|---|---
1| 6| 00636.27| Door Guide 36 1/4″| 13| 1| 00204.00| Pump Cover Large
2| 3| 17506.20| Scullery Door| 14| 1| 00203.05| Impeller 4-1/2”
3| 6| 17554.20| Scullery Door Guide| 15| 1| 00202.00| Pump Base
4| 1| 17530.20| Scullery Wrapper| 16| 1| 00205.00| Pump Gasket
5| 1| 00613.27| Door Handle S| 17| 1| 03108.60| Transfer Hose 1″ Reinf.
6| 2| 01553.22| Door Handle Link S| 18| 1| 00208.40| Slip Joint Nut O Ring
7| 2| 00603.53| Door Spring Extension Rod| 19| 1| 00207.00| Slip Joint Nut 11/2 x 1/4
8| 2| 05007.27| Booster Water Line| 20| 1

1

| 17570.00

17570.10

| Wrap Support Brkt-R

Wrap Support Brkt-L

9| 1| 17401.20| Final Rinse Manifold| 21| 1| 00563.40| Door Switch Bracket (8- 08)
10| 1| 50302.10| 1″ MPT x 1″ Barb Brass| 22| 1| 00563.43| Door Switch Actuator CMA-180T (1-10)
11| 1| 00303.27| Manifold| 23| 2| 00602.20| Door Spring – Heavy Duty
12| 1| 00212.50| 1-1/2”x1-1/4”Adapter|

Unique Parts for CMA-180T Split Door

CMA-DISHMACHINES-CMA-180-VL-Single-Rack-High-Temperature-Straight-
Dishwasher-fig-17

ITEM NO.| NO. STR/COR| P/N| DESCRIPTION| | ITEM NO.| NO. STR/COR| P/N| DESCRIPTION
---|---|---|---|---|---|---|---|---
1| 1/0| 17506.23| Door Safety Brkt. Left| 7| 3/2| 17506.34| Large Door
2| 1/0| 17506.24| Door Safety Brkt. Right| 8| 1/1| 17530.22| Wrapper
3| 1/0| 13701.22| Open Door Latch| 9| 6/4| 17552.22| Door Stop
4| 6/4| 00636.43| EZ Glide Door Gide 8.5”| 10| 0/1| 17530.23| Corner Panel Wrap
5| 6/4| 00636.42| EZ Glide Door Gide 29.75”| 11| 1/1