SUNMODO K10373-001 SunTurf Swivel Pipe Cap Kit User Manual
- June 13, 2024
- SUNMODO
Table of Contents
SUNMODO K10373-001 SunTurf Swivel Pipe Cap Kit
Product Information
- Product Name: Swivel Pipe Cap Kit
- Model Number: K10373-001
- Material: Robust aluminum design with stainless steel hardware
- Safety: Integrated bonding for safety
- Slope Accommodation: Can handle terrains up to 27% slope east-west
Product Usage Instructions
- Before installing the Swivel Pipe Cap Kit, ensure that you have a sloped terrain with a maximum slope of 27% east-west. The kit is designed specifically for undulating hillside terrains.
- Gather all the necessary tools and equipment for installation, including a wrench or socket set.
- Identify the location where you want to install the Swivel Pipe Cap Kit. Ensure that it is suitable for mounting a solar array.
- Place the Swivel Pipe Cap Kit on top of the pipe or pole that will support your solar array. Ensure that it is securely attached.
- Use the provided stainless steel hardware to fasten the Swivel Pipe Cap Kit to the supporting pipe or pole. Tighten the hardware securely using a wrench or socket set.
- Ensure that the Swivel Pipe Cap Kit is properly aligned with the desired east-west contour of the land. This will allow your solar array to follow the slope and maximize its output.
- Once the Swivel Pipe Cap Kit is securely installed and aligned, proceed with the installation of your solar array according to the manufacturer’s instructions.
- Regularly inspect the Swivel Pipe Cap Kit and its hardware for any signs of damage or looseness. Tighten any loose hardware and replace any damaged parts as necessary.
Note: For further information or specific installation guidelines, refer to the complete user manual provided with the Swivel Pipe Cap Kit.
INSTALLATION
Installing solar arrays on undulating hillside terrain is no longer a problem thanks to the Swivel Pipe Cap Kit. This pivoting pipe cap saves time and money by eliminating the need to grade the land before installing the PV array on sloped terrain. The Swivel Pipe Cap Kit, a part of the SunTurf system, can accommodate terrains up to 27% slope east-west.
The Swivel Pipe Cap Kit (K10373-001) is a robust aluminum design with
stainless steel hardware and integrated bonding for
safety.
The solar array can now follow the east-west contour of the land, thus providing the highest possible output through increased density.
Features & Benefits
- Accommodate terrains up to 27% slope east-west.
- Heavy-duty aluminum construction.
- 3/8 stainless steel hardware with integrated bonding provided in every pipe cap.
- Eliminates the need to grade the land.
SLOPE CONVERSION TABLE
- DEGREES: 15
- GRADIENT (Rise/Run): 1: 3.73
- PERCENT: 26.8%
SunModo Corp | Vancouver, WA | 360-844-0048 | Pub No.D10188-V002 | ©2021 – SunModo Corp.