cudy RE1200 Wi-Fi Extender Installation Guide
- August 8, 2024
- cudy
Table of Contents
cudy RE1200 Wi-Fi Extender
Product Information
Specifications
- Model: 810600194
- Language Options: English, Italiano, Magyar, Deutsch, Eesti, Norsk, Svenska, Ting Vit, Cestina, Suomi
- Support: www.cudy.com/support
Installation
- Plug the extender into a socket near your router and wait for it to boot up.
- Pair the extender with your router using either Method A or B:
- Method A: Press the WPS buttons on your router and then on the extender. Wait for the LED to light up.
- Method B: Connect your computer or phone to the extender’s Wi-Fi and set it up in your browser by following the on-screen instructions.
FAQ
- Q: How do I reset the extender?
- A: Locate the RESET button on the extender (usually labeled). Use a paperclip or a similar tool to press and hold the RESET button for about 10 seconds until the device restarts.
- Q: How can I change the Wi-Fi network name and password?
- A: To change the Wi-Fi network settings, access the extender’s configuration interface through a web browser. Log in using the default credentials provided in the user manual. Navigate to the Wi-Fi settings section to modify the network name (SSID) and password.
- Q: What should I do if the LED on the extender does not light up during setup?
- A: If the LED does not light up during setup, ensure that the extender is properly plugged in and powered on. Try resetting the extender and repeating the setup process. If issues persist, contact technical support for assistance.
Product Usage Instructions
- Plug the extender into the socket near your router and wait for it to boot up.
- Pair the extender with your router using method A or B.
- A: Press the WPS buttons on your router and then the extender, and wait for the LED to light up.
- B: Connect your computer or phone to the extender’s Wi-Fi and set it up in your browser.
Follow the steps shown in the pictures.
Flip the page to continue…
-
Connect your device to the extended Wi-Fi and try accessing the Internet. By default, the password for the extended network will be the same as the original network.
Note: If you pair the extender with a “Cudy Mesh” device by pressing the WPS buttons, the Wi-Fi name will be the same as the original Wi-Fi. -
Relocate the extender between the Wi-Fi coverage area and the area where you want to expand the Wi-Fi signal.
CONTACT
NEED TECH HELP?
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>