Cudy GS1018PS2 16-GbE PoE Switch Unit Installation Guide
- August 7, 2024
- cudy
Table of Contents
Cudy GS1018PS2 16-GbE PoE Switch Unit
Hardware Connection
Power Socket
Physical Appearance
Front board
Backboard
Specifications
-
Model GS1018PS2
-
Network Protocol
- IEEE802.3 / IEEE802.3u / IEEE802.3z
- IEEE802.3x / IEEE802.3ab / IEEE802.3af/at
-
PoE Protocol
- IEEE802.3at (30W) and IEEE802.3af (15.4w)
-
Optical Media
- Multimode fiber:50/125,62.5/125,100/140um
- Single mode fiber:8/125、8.7/125,9/125,10/125um
-
AC Input Voltage
- AC100~240V
-
POE Voltage
- DC 44-57 V
-
Power Pin
- Power over spare pairs 1/2(+) , 3/6 (-)
-
Network Medium
- 10BASE-T : Cat 3,4,5 UTP(≤100 meter)
- 100BASE-TX : Cat5 or more UTP (≤100 meter)
- 1000Base-TX : Cat5 or more UTP/STP(≤100 meter)
-
Supply Power
- 52V ~ 3.84A
-
POE Power
- Maximum 180W
-
Dimension(L×W×H)
- 320mm×207mm×44mm
-
Bandwidth
- 40 Gbps
-
Forwarding Rate
- 29.76 Mpps
-
Packet Buffer
- 3Mbit
-
MAC Address
- 8K
-
Transfer Mode
- Store-And-Forward
-
Working Temperature
- -10~50℃
-
Storage Temperature
- -40~70℃
-
Working humidity
- 10%~90%, non-condensing
-
Storage humidity
- 5%~95%, non-condensing
DIP Explanation
- OFF Standard Switch
- All interfaces can communicate with each other, the transmission distance is less than 100 meters, the transmission rate is 10/100/1000M adaptive(Disable POE watchdog)
- ON Link Extension (9-16 Port)
- Link extension mode, 9-16 ports force 10M, link 250M (enable POE watchdog)
LED and Interface Explanation
EU declaration of conformity
Cudy hereby declares that the device complies with the essential requirements
and other relevant provisions of directives 2014/30/EU, 2014/35/EU,
2009/125/EC, and 2011/65/EU. The original EU Declaration of conformity may be
found at http://www.cudy.com/
- Email:support@cudy.com
- Website:www.cudy.com
References
- Cudy, Your Home and Business Networking Solutions Provider
- Cudy, Your Home and Business Networking Solutions Provider
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>