SILVER CREST SRTVA 5 A1 Bladeless Table Fan Instruction Manual

: August 6, 2024
: SILVER CREST

Table of Contents

SILVER CREST SRTVA 5 A1 Bladeless Table Fan
Scope of Delivery
Equipment
Safety Instructions
- General Safety Instructions
Preliminary Measures prior to Starting Up
Starting Up
Maintenance, Cleaning and Storage
ROWI Germany GmbH Warranty
Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SILVER CREST SRTVA 5 A1 Bladeless Table Fan

SILVER-CREST-SRTVA-5-A1-Bladeless-Table-Fan

Introduction
We congratulate you on your new device purchase. You have thus opted for a high quality product. These Directions for Use are an integral part of this product. They contain important information for safety, use and disposal. Prior to the product use, make yourself familiar with all instructions for use and safety. Use the product only as described and only for the specified fields of use. If you hand on the product to third parties, also hand over all the product documents.

Intended Use
This unit is suitable for circulating air in dry indoor spaces. Any other use or modification of the unit is considered improper and involves a considerable risk of accident. We accept no liability for damage resulting from improper use. The unit is intended for private use only and not for commercial use.

Scope of Delivery

1 Desk fan
1 Power adapter + USB cable with USB-A and C connection
1 Instruction manual

Equipment

Fan

Ambience button
Indicator light
On/Off button
Power adapter + USB cable with USB-A and C connection

Technical Data
Input voltage: 5 V
Power consumption: 6 W

SILVER-CREST-SRTVA-5-A1-Bladeless-Table-Fan-1

Mains adapter M050200-S86EUU (only for use with Desk fan SRTVA 5 A1)

Input voltage: 100-240 V~
Rated frequency: 50/60 Hz
Output power: 10 W
Protection class:
Mains cable length: 1.2 m

GB/IE/NI/CY/MT 7 ErP table of the device

Designation	Symbol	Value	Unit
Maximum volume flow	F	3.89	m3/min
Fan Power consumption	P	4.4	W
Service ratio	SV	0.884	(m3/ min)/W
Power consumption in standby mode	PSB	0.15	W
Fan Sound power level	LWA	53.5	dB(A)
Maximum air speed	c	2.27	m/s
Seasonal electricity consumption	Q	1.58	kWh/a
Measurement standard for determining service ratio	IEC 60879:2019

ErP table of the adapter

Information published

Manufacturer’s name or trade mark, commercial registration number and address:

5th Floor, No. 6 Chuangzhi Science Park, High-tech Industrial Development Zone, Fuzhou, Jiangxi, PR China 91361003MA3ADHP67M

Model identifier: M050200-S86EUU
Information published| Value and precision| Unit
---|---|---
Input voltage| 100-240| V~
Input AC frequency| 50/60| Hz
Output voltage| 5.0| V
Output current| 2.0| A
Output power| 10.0| W
Average active efficiency| 80.96| %
Efficiency at low load (10 %)| 74.82| %
No-load power consumption| 0.08| W

Explanations of all symbols

SILVER-CREST-SRTVA-5-A1-Bladeless-Table-Fan-4

Safety Instructions

Please read all safety information and instructions.
Failure to comply with the safety instructions and precautions may result in serious injury and/or property damage.

For future reference, keep all safety instructions and precautions in a safe place!

Danger to life by electrical current!
Contacting the live cables or components is dangerous to your life!

Do not use the appliance if the mains adapter or plug is damaged.
Never open the housing of the unit. If live connections are touched and/or the electrical and mechanical construction is changed, there is a risk of electric shock!
Before connecting the unit, compare the connection data on the type plate (voltage and frequency) with the data of your electrical network. Make sure that the data match so that no damage occurs to the unit.
Make sure that the mains adapter is undamaged and not laid over hot surfaces and/or sharp edges.
Make sure that the mains adapter is not bent or pinched.
Repairs to electrical appliances may only be carried out by specialists who have been trained by the manufacturer. Improper repairs can cause considerable danger to the user.

General Safety Instructions

Check the unit for external, visible damage before use. Do not operate a damaged or dropped unit.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.
Check the item for completeness and function before commissioning. Do not operate a dropped unit.
Do not use the product if you notice any visible damage.
The unit must be placed on a firm, flat and level floor.
Only have repairs to the unit carried out by authorised specialist companies or customer service. Improper repairs can cause considerable danger to the user. In addition, the warranty claim will expire. Defective components may only be replaced with original spare parts. Only these parts guarantee that the safety requirements are met. Protect the unit from moisture and the ingress of liquids.
Only pull the mains adapter out of the socket by the plug.
Do not operate the appliance near naked flames.
Do not place the unit directly below or above a wall socket.
In the event of malfunctions and during thunderstorms, pull the mains plug out of the socket.
Only operate the unit with the mains cable fully unwound. Never wrap the mains cable around the appliance. Make sure that the mains cable does not come into contact with hot surfaces. Lay the cable in such a way that you cannot trip over it.
The unit may only be operated with the supplied power supply unit (model M050200-S86EUU).
No user action is required to set the product to 50 or 60 Hz. The product automatically adjusts to the correct frequency or voltage.

Preliminary Measures prior to Starting Up

Device Installation
Remove all packaging material and all transport bracing from the device.

For a safe and trouble-free running of the device, choose the installation location which meets the following requirements:

The floor should be firm, flat and horizontal.
Minimum distances of 30 cm to the side, 30 cm to the top, 30 cm to the rear and 1 m to the front must be maintained from the enclosure.
Do not place the unit in a hot, wet or very humid environment.
The socket must be easily accessible so that the mains connection cable can be easily disconnected if necessary.
Temperature range: from 0 to +40 °C
Air humidity (no condensation): 5–75 %

Starting Up

Standby mode
Plug the USB-A connection of the USB cable into the power adapter 4 and then connect the USBC connection to the device. You can now plug the power adapter into the socket. The device is now supplied with power. A short signal tone sounds and the indicator light 2 flashes green 3 times.

Switch on the unit
Press the on/off button 3 to switch the product on. The appliance starts directly in ventilation level “1” when first switched on – the indicator light 2 lights up white.

Switch off the unit
To switch the appliance back to standby mode after operation, press the On/Off button 3 up to the max. fan level + 1 more time. The fan switches off and the indicator light 2 goes out.

To switch between the fan speeds, press the On/Off button 3 repeatedly until you reach the desired speed 1, 2 or 3 (speed 1 indicator light 2 white; speed 2 indicator light 2 blue; speed 3 indicator light 2 green).
The desired ventilation level is adopted directly.

LED atmospheric light function

Press the ambience button 1 to start the atmospheric light function. This works inside and outside ventilation mode.
Press the ambience button 1 repeatedly to obtain the desired colour scheme (white, blue, green, red, purple).
After reaching the colour purple, press the ambience button 1 again to switch to the colour change. The colours change automatically in the RGB colour space after a few seconds, starting with orange.
To end the atmospheric light function, press the ambience button 1 again after reaching the colour change.

Maintenance, Cleaning and Storage

Always unplug the mains adapter 4 when the appliance is not in use and before any cleaning or in case of malfunctions!
Only clean the appliance when it is switched off and cold.
Make sure that no moisture enters the unit during cleaning to avoid irreparable damage to the unit.
Only clean the housing with a dry, soft cloth.
Never use abrasive and/or scratching cleaning agents.
Remove dust deposits from the unit with a hoover.
Store the unit in a dry environment.

Disposal
The packaging is made of environmentally friendly materials that you can dispose of at your local recycling centres.
The Triman logo is valid in France only.

This product is subject to the European Directive 2012/19/EU.
Do not dispose of the product in household waste, but via municipal collection points for material recycling! Further information on how to dispose of the discarded device can be obtained from your local authority or city council.
Observe the labelling of the packaging materials when separating waste; these are marked with abbreviations (a) and numbers (b) with the following meaning: 1–7: Plastics/20–22: Paper and card-board/80-98: Composites.

ROWI Germany GmbH Warranty

Dear Customer,
This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.

Warranty conditions
The validity period of the warranty starts from the date of purchase. Please keep your original receipt in a safe place. This document will be required as proof of purchase.
If any material or production fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you or refund the purchase price at our discretion. This warranty service is dependent on you presenting the defective appliance and the proof of purchase (receipt) and a short written description of the fault and its time of occurrence.

If the defect is covered by the warranty, your prod-uct will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.

Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.

Scope of the warranty
This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.

The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or fragile parts such as switches, batteries or those made of glass.
The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.

This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper han-dling, use of force and modifications/repairs which have not been carried out by one of our authorised Service centres.

Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:

Please have the till receipt and the item number (IAN 455779_2307) available as proof of purchase.
You will find the item number on the type plate on the product, on the front page of the instruc-tions (bottom left), or as a sticker on the rear or bottom of the appliance.
If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

At www.lidl-service.com you can download this manual as well as many other manuals, product videos and installation software. This QR code will take you directly to the Lidl service page (www.lidl-service.com) and allow you to open your operating instructions simply by entering the article number (IAN 455779_2307).