RILEY SCOOTERS RS3 Plus Electric Scooter User Manual
- June 14, 2024
- RILEY SCOOTERS
Table of Contents
RS3 Plus
User Manual
RS3 Plus Electric Scooter
RS3
Plus Electric Scooter
Riley Scooters
Thank you for choosing a Riley Scooter. We are a British start-up with an
ambitious vision. Your electric ride truly makes a difference.
With increasing urban traffic and environmental issues throughout the world,
you are supporting us to achieve our mission of providing “a viable way
forward for smarter, cleaner cities”.
Riley Scooters is reinventing urban transportation leading to a positive
environmental difference in the world through our all-electric scooter
revolution.
Whilst the e-scooter may be just a pleasure ride for some, it’s the modern way
of transport. We hope this e-scooter brings you as much satisfaction riding
it, as it did for us creating it.
Contribute to our mission by sharing images and videos of your rides using the
hashtag #riIeyscooters. Together, let’s lead the way forward for modern urban
transport creating a clean and sustainable future for all.
Hayden Riley
Founder & CEO Declaration of conformity
Riley Scooters Limited: Kings Lodge, London Road, Sevenoaks, TN15 6AR,
United Kingdom
This declaration of conformity is issued under the sole responsibility of the
manufacturer.
Object of the declaration:
Type of Device: Electric scooter
Model NO: RS3 Plus
Description: RILEY SCOOTER RS3 Plus
The object of the declaration described above is in conformity with the
relevant Union harmonisation legislation:
| 2011/65/EU amended by 2015/863(EU) | RoHS Directive |
|---|---|
| 2014/30/EU | EMC Directive |
| 2014/35/EU | Low Voltage Directive |
| 2006/42/EC | Machinery Directive |
| 2014/53/EU | RED DIRECTIVE |
References to the relevant harmonize standards used or references to other
technical specification in relation to which conformity is declared:
BS EN 17128:2020
EN 17128:2020
EN 60335-1:2012
EN 60335-2-29:2004
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN 61558-1:2005
EN 61558-2-16:2009
PT 55014-1:2021
EN 55014-2:2015
EN 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019
Name of manufacturer: RILEY SCOOTERS LIMITED
Address: Kings Lodge, London Road, Sevenoaks, TN15 6AR, United Kingdom
Importer/Distributor contact detail:
www.rileyscooters.com
AUTHORISED SIGNATURE: Hayden Riley
Founder & CEO
Date: 2022-10-28
About the manual
For your driving safety, please read this user manual carefully before
using the e-scooter.
Please note “warnings” and “tips” in this manual.
Warnings: improper operation may result in personal injury.
Tips: Helpful advice for the usage of the e-scooter.
Should you have any queries, please contact our customer support team via our
website (rileyscooters.com).
Improper use of the e-scooter and/or failure to read this user manual may lead
to serious bodily injury. Riley Scooters will take no responsibility for any
injuries caused by improper use .
Note: it is important to pump the tyres up to 35 P.S.I (2.41 Bar) for your own
safety and optimal riding quality.
Safety notes
1.1 About safety
There are risks involved with riding an e-scooter. For your safety, please
learn to ride safely and obey the local rules/laws.
Please check the tyres for damage and that fixings are tight before riding.
Please contact your local distributor for any safety queries.
Please do not do anything that may harm other people or their property with
the e-scooter.
Any conversion of the e-scooter is prohibited as it will change its
performance or damage the structure, which may cause serious injury.
Please do not submerge the e-scooter into water, which will not only damage
the e-scooter, but also cause a safety risk.
1.2 Safety precautions
Please note that you may lose balance, or fall over when you ride an
e-scooter. To avoid injury, you should familiarise yourself with this manual
and keep the e-scooter in good condition. Safety measures should be taken
before riding, e.g. wear sportswear, helmet, knee pads and elbow pads. Take
caution when riding in the rain.
DO NOT ride with loading.
DO NOT ride with more than one rider.
Max Load: 120
kg.
DO NOT ride if you are pregnant.
DO NOT ride after drinking alcohol or taking
medicine.
DO NOT listen to music when you ride the
e-scooter.
Be careful of uneven, loose or slippery surfaces. Avoid slopes, stairs and
poorly lit areas. DO NOT use in dangerous areas, where there is a risk from
flammable materials.
Product information
2.1 Overall view
2.2 Operation of buttons
Power Switch:
A. Press and hold the power button to turn on/off.
B. Press the power button twice to turn the headlights on/off.
The tail lights are always on.
Function button:
Press function key to switch riding modes.
Beginner mode (10km/h limit) Gear indicator is not displayed.
Normal mode (15/h limit)
Gear indicator shows white.
Sports mode (25km/h limit)
Gear indicator shows red.
Throttle: Press down the throttle button to accelerate.
Brake: Apply pressure to the brake lever to brake. Lightly step on the rear
fender to assist the brakes.
Cruise mode: Maintain a set speed for 6 seconds to enter the cruise mode. Exit
the cruise mode by pressing down the throttle again, or by braking.
Indicator: Press Left or right arrow once to turn indicator on, press again to
turn off. Both can be turned on as hazard lights, press each separately to
turn on or off.
2.3 Assembly instructions
- Pull-out folding latch to release stem from base plate.
- Pull stem up until it is vertical.
- Pull stem into place and secure the folding spanner.
- Pull latch to release the upper stem. Fold stem upwards until vertical with the lower stem.
- Pull both handle bars upwards until they click into place.
- Unhook base plate hook. Pull and hold the base plate latch.
- While holding the latch, push the folded deck outwards till aligned with upper deck.
- Once in place secure the base plate clip. Ensure it is fastened tightly.
- Push the deck down to secure it in place against the rear fender.
View our instructional video here
2.4. Folding instructions
-
Push down on rear fender, pull up the deck, and fold towards the stem.
-
Press in button on base plate clip, and pull towards rear fender to release.
-
Pull and hold base plate latch and push the rear of the scooter towards the front wheel.
-
Fold the scooter firmly till it’s secure.
Resecure the base plate clip to original position. -
Pull handle bar release clips as arrows indicate, and completely fold handle bars towards stem.
-
Slide button upwards and unclip stem clasp, fold stem towards lower stem.
-
Slide button upwards and unclip folding spanner.
Fold stem down to base plate. -
Slide folding latch back, and align to the hook on the base plate.
Release clip when aligned to secure the stem.
2.5 Uninstall/Install the battery
Uninstall
- Push battery clip in and hold.
- Push the battery up, away from the bottom of the stem.
- After pushing the battery up, pull it out horizontally.
Install
- Insert the battery horizontally into the pole, while pushing the battery clip in.
- When in, let go of the battery clip, and push the battery down until firmly secure.
View our folding video here
How to ride the e-scooter
Wear a helmet, knee pads and elbow pads when you learn to ride the
e-scooter.
- Press the POWER button for two seconds.
- Put one foot on the base plate and push off the ground with your strong leg.
- Balance both feet on your e-scooter when you have enough momentum.
- Press the THROTTLE slightly with your right hand to start and rotate the handlebars to turn.
- Continuously press the throttle to speed up.
- Apply pressure to the brake lever to slow down or stop.
- When the e-scooter stops or runs at a slow speed, you can get off.
Battery instruction
The instructions show you how to charge and maintain the battery and provide
some safety notices and the technical specifications.
Please use the battery properly according to these instructions to prolong
battery life and performance.
4.1 Battery parameters
| Name | Parameter |
|---|---|
| Type | 5.8AH battery |
| Charging time | Approx. 3 hours |
| Voltage | 36V |
| Working temperature | 0°C – 35°C |
| Charging temperature | 0°C – 35°C |
| Max Charging Voltage | 42V |
| Storage Time (at -10°C – 40°C) | 3 months (full charge) |
| Initial Volume | 5.8 AH |
| Max Charging Current | 1.5/2A (check charger label) |
4.2 Battery safety
Do not disassemble the battery.
In the unlikely event that there is a leak in the battery or it overheats, do
not use or charge it and contact us.
Do not let children touch the battery. Always unplug the charger before
installing the battery or riding.
If you want the e-scooter to run most efficiently, the battery must be charged
and used within the temperature range indicated in the battery parameters.
Lithium ion batteries are considered dangerous and require local law to allow
transportation.
The battery contains dangerous substances. Please do not open the battery. Do
not insert anything into the battery.
NEVER throw batteries away in general rubbish. Take the exhausted battery to a
state approved battery recycle centre.
Call your waste collection service to find out if they offer disposal of
batteries.
Do not charge the battery at high temperature or charge the battery in a high
temperature environment.
Only use the original charging equipment to charge the e-scooter.
4.3 Charging instructions
Open the charging port cover, make sure the charging port is clean and dry.
Connect the charger to the battery and the plug to a power source (100V-240V;
50/60Hz). Make sure the charging light is on.
When the charger indicator is green, charging is complete.
Tips:
Connect the charger to the AC power first, then connect it to the battery.
After charging, cover with the dustproof rubber to prevent anything from
entering the charging port and causing battery failure.
Specification
|
---|---
Scooter Specification
Unfolded size| 1181x540x1133mm
Folded size| 649x272x474mm
Height from baseplate to ground| 115mm
Net weight| 16kg
Tyre Size| 8.5 inch pneumatic air tyre with inner tube
Tyre pressure| 35 P.S.I. (2.41 Bar)
Waterproof level| IPX4
Basic Information
Battery Capacity| 36V/5.8 AH
Motor power| 350W
Mileage per charge| 15.5 miles (25km)
Max speed| 15.5 mph (25km/h)
Max loading| 120kg
Climbing angle| 15°
Driving modes| 3 (beginner, eco, sport)
Charger Specification
Input voltage| 100-240V
Frequency| 50-60Hz
Output voltage| 42V
Output current| 1.5A
Store temperature| -10°C – 35°C
Maintenance
Maintenance
Make sure the e-scooter charger and charging cord are disconnected and ensure
that the e-scooter is off.
Check the brake system and tyres at least once a month because they are
sensitive parts.
If braking performance and tyre grip are impaired, contact your local dealer
or Riley Support to purchase replacement parts.
Wipe the shell with a soft damp cloth to clean the e-scooter. It is important
to clean the e-scooter regularly to minimize the buildup of dust and dirt
which may impact the performance of the e-scooter.
Do not clean the e-scooter with a jet wash or by soaking in water. This will
cause permanent damage.
Storage
Please charge your e-scooter before you store. Please ensure this is done at
least once every three months.
If the storage temperature is lower than 0°C, please don’t charge the
e-scooter. Please keep the e-scooter in a suitable place indoors, keep dry and
at the appropriate temperature.
In order to protect the user’s safety, do not take the e-scooter apart,
otherwise the warranty of the product will be invalid.
Troubleshooting
Please contact us for a repair or if there are any issues with the e-scooter.
For contact details please see the Limited Warranty Document.
Tips:
| Potential problem | Solution |
|---|---|
| Unable to start up | Check to see if the battery is charged. |
| Does not charge | 1. Check whether the plugboard has electricity. |
2. Check the charger to see whether the AC plug is connected (whether the
light is on.)
3. Check the plug of the charger and the charging port of the e-scooter have
been inserted
correctly.
What’s included
E-scooter packing list:
1 x E-scooter
1 x Battery
1 x Charger
1 x Manual
1 x Copy of Manufacturer’s Limited Warranty
Please contact us if the product is broken or if anything is missing when you
open the package. We will replace it for you as soon as possible.
Riley Scooter APP
Stay on the move with our app which connects directly to your scooter through
Bluetooth. Get directions, view key riding info, and track your rides
effortlessly.
Features:
- Cockpit showing key riding info
- Lock and trace your scooter
- Track your rides
- Shop our range of accessories
Note: When connecting to your scooter ensure your Bluetooth is enabled on your mobile device and the scooter is turned on.
Scan to download the App. Alternatively, go to Google Play Store (Android) or
the Apple App Store (iOS) and search Riley Scooters to download and install
the App.
Be advised there is a minimum Android/ iOS/Bluetooth version required. See
user materials for additional details.
