deluxe Lucca 2 Hole Wall Mounted Basin Mixer Tap Installation Guide
- August 6, 2024
- Deluxe
Table of Contents
deluxe Lucca 2 Hole Wall Mounted Basin Mixer Tap
Product Specifications
- Main body : 1
- Welding plate : 2
- Spout: 1
- Handle: 1
- Threaded inlet : 1
- Welding plate : 1
- Allen key : 1
- Aerator wrench : 1
Product Usage Instructions
- Prior to installation, flush lines to remove any debris.
- Install valve assembly.
- Install spout assembly.
- Connect water feeds to respective inlets.
- Connect water outlet from valve body to spout.
- Ensure there are no leaks from connections.
- Test to ensure water flow – lift handle upwards, rotate left for hot, rotate right for cold.
Raise the handle upwards to open the water flow and downwards to close it.
FAQ
- Q: What should I do if there are leaks from the connections after installation?
- A: Check if all connections are tightly secured. If leaks persist, contact support atAqualla for assistance.
- Q: How do I adjust the water temperature using the wall bath mixer?
- A: Lift the handle upwards and rotate it left for hot water or right for cold water.
- Q: Can I use this wall bath mixer with a water heater?
- A: Yes, this wall bath mixer can be used with a water heater. Ensure proper installation to avoid any issues.
COMPONENTS
- Please confirm all items present as indicated below, contact support atAqualla for any queries.
Notes
- Image for reference only Please refer to our website for technical drawings
INSTALLATION INSTRUCTIONS
- Prior to installation please flush lines and remove any debris.
- Install valve assembly.
- Install spout assembly.
- Connect water feeds to respective inlets.
- Connect water outlet from valve body to spout.
- Ensure no leaks from connections.
- Test to ensure water flow, lift handle upwards, rotate left for hot, rotate right for cold.
- Contact support atAqualla for any queries.
Installation reference images
OPERATION
- Raise the handle upwards to open the water flow, downwards to close the water
- Turn the handle to the left for hot, and turn to the right for cold
CLEANING
- Rinse and clean with water, dry with a soft cloth
- Do not use abrasive sponges, scouring agents, or sharp scraping tools
- Do not use solvent, acid-based or limescale-removing products
- Rub clean aerator, which can be cleaned by hand or a soft clean cloth
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>