deli S401 Thermal Label Printer User Manual

deli S401 Thermal Label Printer

Product Information

Specifications

• Compliance: Part 15 of the FCC Rules
• RF Exposure: General RF exposure requirement met

Product Usage Instructions

Warnings and Precautions
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

Operating Conditions
Operation of this device is subject to the following conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure
The device has been evaluated to meet general RF exposure requirements. Please ensure proper usage to maintain compliance.

FAQ

• Q: Can I modify the device on my own?
  A: No, any changes or modifications not approved by the manufacturer could void your authority to operate the equipment.

• Q: What should I do if I experience interference?
  A: Ensure that the device is operating under proper conditions as outlined in the user manual. If interference persists, contactcustomer support for assistance.

USER MANUAL
Thermal label printer

Physical appearance and components

LED indicator description

Product standard   number: GB/T 28165

Loading the Paper Roll

1. Press the caver switch to open the printer caver.
2. Load the p□par roll into the label supply shaft and secure it to the center of the supply shaft using □ paper roll fixing plate.
3. Place the paper roll directly on the paper roll holder. If 0  wider paper roll is directly used, the fixing piece can be removed and the paper roll can be used
4. Reserve 1cm outside the paper outlet and cover it with the printer cover.

General button functions

Poper feed
When the printer is ready (the blue LED indicator ‘is constantly only press the FEED button and the label poper will move to the front of the next lobe I poper.

suspend
When the printer is printing continuously, pressing PAUSE will pause printing. At this time, the power indicator indicator is flashing blue. Press the button again and the printing process will resume normal.

LED indicator indicator description

Please follow the following steps to activate the power an function

1. Power on self-test
   • Turn off printer power
   • Confirm that the printer has been loaded with paper and cover it with the printer cover
   • Press and hold the FEED button, and turn on the printer power. At this time, the printer will print a self detection test page. Release the feed button
2. Printer initialization
   • Turn off printer power
   • Press and hold the PAUSE and FEED keys simultaneously, and turn on the printer power until the power (blue) indicator is on and the error (red) indicator is off. Release the PAUSE and FEED keys, and the printer will clear the user data from its internal memory and restore the printer parameters to their default factory settings.

WARRANTY CARD

Thank you for your purchase of our products. The interests of customers who purchase our products will be protected. For any malfunction due to product quality problems. please contact authorized local dealers or service centers with this receipt and the warranty card.

Warranty terms

1. For product failures occur under normal operating circumstances, free of charge repair and spare parts replacement service shall be provided by our company within one year commencing from date of purchase.
2. Customers are required to present this warranty card and the original purchase invoice to our company upon request for warranty service.  This warranty card shall be valid only after the following form is filled out in details and affixed with official seal of the dealer.
3. No free of charge repair service shall be provided in the event of any of the following circumstances:
4. Expiration of the warranty period;
5. Damages caused by improper use, maintenance or storage not in accordance with the requirements of the user manual;
6. Failure or damage resulting from unauthorized disassembly, repair or modification;
7. Failure or damage caused by force majeure;
8. Wear parts or accessories.

This warranty card is being delivered with the product, one card for one product. Please keep this warranty card in proper condition for free warranty service. There is no replacement if lost.

Date of Purchase: -Y – M D

WARRANTY CARD

This conu shall be cut along the dotted line and kept bu the dealer.

CERTIFICATE
Inspector:
Date of Manufacture:

DELI GROUP CO., LTD.
Deli Industrial Zone, Ninghai County, Ningbo City, Zhejiang Province, China Made in China info@nbdeli.com www.deliworld.com
KEEP FOR FUTURE USE
version: 1.0 Date: 4-2024

After-sales Sercice
Thermal label printer

Warranty Terms

Warranty scope and period

1. The warranty is limited to product malfunctions caused by poor materials or manufacturing processes.
2. The warranty period is calculated from the date of purchase by the customer (based on the purchase invoice). If the customer is unable to provide an invoice From the date of production of the product.
3. Warranty period:
   • Printer: One year.
   • The warranty period for the print head is three months (or 30000 cm in length, whichever comes first).

Warranty service principles

1. Free warranty for products that meet the warranty period and scope.
2. When conducting warranty, a warranty card must be presented.
3. Maintenance services outside the warranty period or outside the warranty scope will be charged according to the standard by Deli.
4. If the product is disassembled or repaired without technical certification, the warranty will become invalid.
5. The repair machine must be packaged in its original packaging or in a packaging with considerable protection, as the transportation package Damaged equipment is not covered by the warranty.

Non Warranty Terms

1. There is no warranty card or the content of the warranty card has been altered.
2. Failure to maintain the printer according to the user manual resulted in damage to the printer.
3. The printer is damaged due to water ingress or foreign objects.
4. The print head is damaged due to the use of printing media with excessive thickness.
5. The use of inferior consumables resulted in damage to the print head.
6. Damage caused by improper usage environment or force .
7. Use the printer for other purposes beyond its intended use.
8. Damage not caused by our technical engineers maintenance.

The final interpretation right of the above terms belongs to Deli Group Co., Ltd.

Troubleshooting

The content in the table below is common problems and problem-solving methods for general operators; If you have followed our suggested method to troubleshoot the issue and the printer is still not functioning properly, please contact the customer service department of your purchasing manufacturer for further assistance.

Technical Parameter

Warning: Operating this device in a residential environment may cause radio interference.
Warning: Sharp edges, do not touch. Warning: Hot parts! Touching this component may burn your fingers.
Wait for half an hour after turning off the power before touching the component.

FCC Warning Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>