peppa pig HG11147A Toddler Paddling Pool Sand and Water Pool Instruction Manual

: August 3, 2024
: Peppa Pig

Table of Contents

peppa pig HG11147A Toddler Paddling Pool Sand and Water Pool
Product Usage Instructions
List of pictograms used
Introduction
Technical data
Safety advice
Use
Cleaning and maintenance
Disposal
Warranty
Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

peppa pig HG11147A Toddler Paddling Pool Sand and Water Pool

Specifications

Product Name: Toddler Paddling Pool/Sand & Water Pool
Model Number: IAN 446523_2307
Age Recommendation: Above 5 years
Intended Use: Outdoor toy for domestic use

Product Usage Instructions

Assembling the Product
Choose a suitable level and clean area with sufficient space to unpack and unfold the product.

Filling the Product with Water
Fill the product slowly and do not leave it unattended while filling. Fill the product up to, at most, the printed mark.

Emptying the Product
Pull the patch off of the paper, apply it to the damaged area, and firmly press down on it to repair any leaks.

Cleaning and Maintenance
Use a slightly damp, lint-free cloth to clean the product. Do not use corrosive or scouring detergents. Empty the product following local regulations and allow it to dry completely before folding.

FAQ
Q: What age group is this product suitable for?
A: This product is designed for children above the age of 5 for outdoor use.

List of pictograms used

Toddler Paddling Pool/Sand & Water Pool

Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to the operating in- structions and the safety advice below. Only use the product as instructed and only for the indicated field of application. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intended use
This product is a toy for outdoor use for children above the age of 5.
Warning! Only for domestic use.

Technical data

Dimensions inflated: approx. Ø 99 x 23 cm (HG11147A) approx. 86 x 14 x 72cm (W x H x D) (HG11147B)

Contents

1 1 Paddling pool
2 1 Deflation tube
3 2 Repair patches
1 Instructions for use

Safety advice

Attention!
All of the packaging materials do not belong to the toy and should be removed for safety reasons, before this product is given to children to play with.
KEEP ALL THE SAFETY ADVICE AND INSTRUC-TIONS IN A SAFE PLACE FOR FUTURE REFERENCE!

Avoid the risk of injury!

WARNING RISK OF LOSS OF LIFE OR ACCIDENT TO INFANTS AND CHILDREN! Never leave children unsupervised with the packaging material or the product. The pack- aging material presents a suffocation hazard and there is a risk of loss of life from strangulation and or drowning. Children often underestimate danger. Always keep the product out of reach of children.

WARNING! The product is suitable for children aged 5 years and older. W ARNING! Never leave your child unat-tended – drowning hazard.
WARNING! Only for domestic use. W ARNING! DANGER TO LIFE THROUGH DROWNING! Never leave children and products alone and unsupervised in the water. There is a danger of drowning. Use swimming aids if necessary. Never stay in the water alone. Make sure that at least one competent person is present.
W ARNING! Only use the shallow water under adult supervision.
This product should always be assembled by an adult.
This product should be set up on a grass surface, which is level and free of stones, sticks, bumps and holes.
This product should have an adequate safety distance of at least 2 m to buildings, stairs, fences, walls, bodies of water, electrical wires and other hindrances.
Do not assemble this product on concrete, asphalt or any other hard ground.
Do not use this product in windy weather conditions or when it’s raining or snowing. Before each use, please check the product for damages or wear.
This product may only be used if it is in absolute perfect condition!
Explain to your children how to use the product to play safely.
The product may only be used by one person at a time.
Children can drown in small quantities of water. The product must be emptied when it is not in use. Do not make any modifications to the product. Only use clean mains water. Soiled water can put the health of the users at risk.
When setting up the product, make sure that it is not exposed to direct sunlight.
Please note that clean pool water is the condition for the safe use of the product. Contaminated water can endanger the health of users. Objects that are hard and have sharp edges, e.g toys, should not be in the pool when it is being used. Do not wear or carry jewellery,
watches or keys. Take off your shoes and your child’s and remove glasses if worn.
To prevent against damage to the product and injuries to people the product may not be used until it is fully inflated.
Children may not jump into the pool.
Adult assembly required.
Do not use the product if air is escaping.
All inflatables are susceptible to cold. For this reason, never unfold and inflate the product at a temperature lower than 15 degree Celsius.
Warning! Avoid the use of sunscreen and skin care products containing alcohol. Sunscreen and skin care products containing alcohol may dissolve the colour coating of inflatable PVC items. This can lead to discolouration on your body, your clothing or on other objects which come into contact with the product.
In the event that the air pressure increases in the hot sun, it must be balanced accordingly by letting out air.
Use the correct pump adapters to insert into the safety valves. The valves might otherwise be damaged.
Do not over-inflate to avoid damaging the product. Close the valves properly after inflating. Change the water of the product frequently (particularly in hot weather) or when noticeably contaminated.

Use

Assemble the product
Choose a suitable level and clean area with sufficient space to unpack and unfold the product.

Inflate the product

WARNING

Always inflate the air chambers fully!
Avoid inflating the air chambers too much because there is the risk of over- stretching the welded seams or even tearing them open.
Use standard commercial foot pumps or double-stroke piston pumps with matching adapter attachments to inflate the product.
Do not use a compressor or compressed air bottles to inflate the product. This can lead to damage to the product.
Make sure that the chambers are filled with air evenly.
Inflate each air chamber until it feels firm to the touch. When you press with your thumb against the air chamber, it should still give a little.
For HG11147A: Follow the correct sequence when inflating the air chambers. Always inflate all air chambers fully.

Lower air chamber
Middle air chamber
Upper air chamber

Open the valve seal and inflate the air chambers.

Close the valve seal and push in the valve by pressing lightly (see fig. B).

Filling the product with water

Fill the product slowly and do not leave it unattended while filling.
Note: Fill the product up to, at most, the printed mark.

Emptying the product

Empty the product.
Note: Please follow the local regulations regarding specific requirements for disposing of water from swimming pools.
Allow the product to dry completely before folding.

Deflate the product
To deflate the individual air chambers, pull the valve out, open the valve seal and press the valve stem lightly so that the air can escape or insert the deflation tube into the seal to allow the air to escape quickly.

Repair the product

Important!

Do not use the product for 20 minutes after repairing it!
Do not use the patch for leaks or holes on the seam.
Note: Minor damage can be repaired by the owner using the supplied repair kit. Have any major dam-age carried out at a specialised repair shop.
Clean the area around the leak thoroughly! This area must be dry and free from grease or oil.
Cut the repair patch to a size, which is approx. 1.3 cm larger in diameter than the damaged section.
Pull the patch off of the paper, apply it to the damaged area and firmly press down on it (see fig. C).

Cleaning and maintenance

On no account should you use corrosive or scouring detergents.
Use a slightly damp, lint-free cloth to clean the product.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.
Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

The product incl. accessories and packaging materials are recyclable and are subject to extended producer responsibility. Dispose them separately, following the illustrated Info-tri (sorting information), for better waste treatment. The Triman logo is valid in France only.

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of material or manufacturing defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.
The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Keep the original sales receipt in a safe location as this document is required as proof of purchase.

Any damage or defects already present at the time of purchase must be reported without delay after unpacking the product.
Should the product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period is not extended as a result of a claim being granted. This also ap-plies to replaced and repaired parts.
This warranty becomes void if the product has been damaged, or used or maintained improperly.
The warranty covers material or manufacturing defects. This warranty does not cover product parts subject to normal wear and tear, thus considered consumables (e.g. batteries, tubes, cartridges), nor damage to fragile parts, e.g. switches or glass parts.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:
Please have the till receipt and the item number
(IAN 446523_2307) available as proof of purchase. You will find the item number on the rating plate, an engraving on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product.
If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.