Turbosound iNSPIRE iP2000, iP1000, iP500 Watt Powered Column Loudspeaker User Guide
- August 2, 2024
- Turbosound
Table of Contents
- Turbosound iNSPIRE iP2000, iP1000, iP500 Watt Powered Column Loudspeaker
- Specifications
- Product Usage Instructions
- iP Series Bluetooth Instructions
- Bluetooth Control
- Other important information
- FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
- FAQ
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Turbosound iNSPIRE iP2000, iP1000, iP500 Watt Powered Column Loudspeaker
Specifications
- Product Models: iNSPIRE iP2000, iP1000, iP500
- Version: 3.0
- Manufacturer: Music Tribe
| iP2000| iP1000| iP500
---|---|---|---
System| |
Frequency response| 45 Hz – 20 kHz ±3 dB
38 Hz – 20 kHz -10 dB
| 50 Hz – 20 kHz ±3 dB
43 Hz – 20 kHz -10 dB
| 65 Hz – 14 kHz ±3 dB
50 Hz – 16 kHz -10 dB
Nominal dispersion| 120° H @ -6 dB points| 120° H @ -6 dB points|
100° H @ -6 dB points
Maximum SPL| 123 dB| 122 dB| 118 dB
Crossover type| 4 way, active and passive| 4 way, active and
passive| 2 way, active
Transducers
| 1 x 12″ (305 mm) LF driver
16 x 2.75″ (70 mm) MF drivers
1 x 1″ (25 mm) HF compression driver
| 2 x 8″ (208 mm) LF drivers
8 x 2.75″ (70 mm) MF drivers
1 x 1″ (25 mm) HF compression driver
| 1 x 8″ (208 mm) LF driver
6 x 2″ (54.2 mm) HF drivers
Limiter| Independent HF, LF| Independent HF, LF| Independent HF, LF
Amplifier| | |
Maximum **output power*| 1000 W| 1000 W| 600 W
Type| Class-D| Class-D| LF: Class-D HF: Class AB
Protection| Short circuit, open circuit, thermal| Short circuit, open
circuit, thermal| Short circuit, open circuit, thermal
Amplifier channels| 3| 3| 2
Connectors| | |
Input A / B| 2 x combo jack / XLR| 2 x combo jack / XLR| 2 x combo jack
/ XLR
Sensitivity| 4 dBu, nominal| 4 dBu, nominal| 4 dBu
Input impedance| 16 kΩ unbalanced, 33 kΩ balanced| 16 kΩ unbalanced, 33 kΩ
balanced| 16 kΩ unbalanced, 33 kΩ balanced
Maximum input level| +22 dBu| +22 dBu| +22 dBu
Link output| XLR| XLR| XLR
Mains supply| IEC mains connector with integrated power switch†| IEC
mains connector with integrated power switch†| IEC mains connector with
integrated power switch†
Controls| | |
Hardware| Rotary push-encoder| Rotary push-encoder| Rotary push-encoder
Software| iOS interface via Bluetooth| iOS interface via Bluetooth| iOS
interface via Bluetooth
User DSP Functions| | |
Factory EQ presets| Positioning, sound mode| Positioning, sound
mode| Positioning, sound mode
Display| LCD 128 x 32, blue, backlit| LCD 128 x 32, blue, backlit| LCD
128 x 32, blue, backlit
Equalization| Bass, middle and treble| Bass, middle and treble| Bass,
middle and treble
Reverb| Klark Teknik design| Klark Teknik design| Klark Teknik design
Protection| Lock-out function for all settings| Lock-out function for
all settings| Lock-out function for all settings
Bluetooth Wireless Technology| | |
Frequency range| 2402 MHz ~ 2480 MHz| 2402 MHz ~ 2480 MHz| 2402 MHz
~ 2480 MHz
Channel number| 79| 79| 79
Version| Bluetooth 4.0 dual mode| Bluetooth 4.0 dual mode| Bluetooth 4.0
dual mode
Output| 8 dBM| 8 dBM| 8 dBm
Compatibility| Supports A2DP 1.2, AVRCP 1.4 profile| Supports A2DP 1.2,
AVRCP 1.4 profile| Supports A2DP 1.2, AVRCP 1.4 profile
Maximum communication range| 30 m (without interference)| 30 m (without
interference)| 30 m (without interference)
Connectivity| Master-slave: stereo pairing link| Master-slave: stereo
pairing link| Master-slave: stereo pairing link
| iP2000| iP1000| iP500
---|---|---|---
Power Supply| |
Power consumption| 110 W @ 1 / 8 max power| 110 W @
1 / 8 max power| 80 W @ 1 / 8 max power
Voltage (fuses)| | |
USA / Canada / Japan| 100-120 V~, 50/60 Hz (T 6.3 A H 250 V)| 100-120 V~,
50/60 Hz (T 6.3 A H 250 V)| 100-120 V~, 50/60 Hz (T 6.3 A H 250 V)
UK / Australia / Europe| 220-240 V~, 50/60 Hz (T 3.15 A H 250 V)| 220-240 V~,
50/60 Hz (T 3.15 A H 250 V)| 220-240 V~, 50/60 Hz (T 3.15 A H 250 V)
Korea / China| 220-240 V~, 50/60 Hz (T 3.15 A H 250 V)| 220-240 V~, 50/60 Hz
(T 3.15 A H 250 V)| 220-240 V~, 50/60 Hz (T 3.15 A H 250 V)
Enclosure| | |
Dimensions (H x W x D)| 2063 x 420 x 500 mm (81.2 x
16.5 x 19.7″)| 1955 x 262 x 370 mm (77.0 x 10.3 x 14.6″)| 2006 x 321 x 400 mm
(79.0 x12.6 x 15.7″)
Base| 485 x 420 x 500 mm (19.1 x 16.5 x 19.7″)| 655 x 262 x 370 mm (25.8
x 10.3 x 14.6″)| 416 x 321 x 400 mm (16.4 x 12.6 x 15.7″)
Tower| 834 x 103 x 89 mm (32.8 x 4.0 x 3.5″)| 1345 x 103 x 89 mm (53.0 x
4.0 x 3.5″)| 918 x 132 x 72 mm (36.1 x 5.2 x 2.8″)
Net weight| 30.9 kg (68.1 lbs)| 24.8 kg (54.7 lbs)| 15.1 kg (33.2
lbs)
Construction, base| 15 mm (5/8″) birch plywood| 15 mm (5/8″) birch
plywood| Engineering plastic (GXPP)
Construction, tower| Aluminum alloy| Aluminum alloy| Engineering
plastic (ABS)
Finish| Semi matte black paint| Semi matte black paint| Semi matte black
paint
Grille| Powder coated perforated steel| Powder coated perforated steel|
Powder coated perforated steel
Accessories| **
—
| ****
—
| ****
Protective cover (included)
Product Information
The iNSPIRE iP series are innovative sound reinforcement systems designed
for various audio applications. These systems provide high-quality audio
output in a compact and portable form factor. The product features advanced
technology to deliver clear sound and powerful performance suitable for small
to medium-sized venues, events, and gatherings.
Product Usage Instructions
Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear
section). No user serviceable parts inside. Refer servicing to qualified
personnel.
Caution
To reduce the risk of fire or electric shock, do not expose this appliance to
rain and moisture. The apparatus shall not be exposed to dripping or splashing
liquids and no objects filled with liquids, such as vases, shall be placed on
the apparatus.
Caution
These service instructions are for use by qualified service personnel only. To
reduce the risk of electric shock do not perform any servicing other than that
contained in the operation instructions. Repairs have to be performed by
qualified service personnel.
Warning
Please refer to the information on the exterior of bottom enclosure for
electrical and safety information before installing or operating the device.
-
Please read and follow all instructions and warnings.
-
Keep the apparatus away from water (except for outdoor products).
-
Clean only with dry cloth.
-
Do not block ventilation openings. Do not install in a confined space. Install only according to manufacturer’s instructions.
-
Protect the power cord from damage, particularly at plugs and appliance socket.
-
Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.7. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other (only for USA and Canada). A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. -
Protect the power cord from damage, particularly at plugs and appliance socket.
-
Use only attachments and accessories recommended by the manufacturer.
-
Use only specified carts, stands, tripods, brackets, or tables. Use caution to prevent tip-over when moving the cart/=apparatus combination.
-
Unplug during storms, or if not in use for a long period.
-
Only use qualified personnel for servicing, especially after damage.
-
The apparatus with protective earthing terminal shall be connected to a MAINS socket outlet with a protective earthing connection.
-
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
-
Avoid installing in confined spaces like bookcases.
-
Do not place naked flame sources, such as lighted candles, on the apparatus.
-
Operating temperature range 5° to 45°C (41° to 113°F).
Safety Instructions
- Read and follow all safety instructions provided in the manual.
- Avoid exposure to rain or moisture to prevent electric shock or fire hazards.
- Do not attempt to service the product yourself; always consult qualified service personnel.
- Ensure proper grounding and use of appropriate power outlets.
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specifications, appearances and other
information are subject to change without notice. All trademarks are the
property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston
Microphones and Coolaudio are trademarks or registered trademarks of Music
Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2024 All rights
reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information
regarding Music Tribe’s Limited Warranty, please see complete details online
at
community.musictribe.com/support.
Installation
Place the iNSPIRE iP system on a stable surface away from direct sources of
heat or moisture. Ensure proper ventilation around the device for optimal
performance.
Thank you for choosing a Turbosound loudspeaker product for your application. If you would like further information about this or any other Turbosound product, please visit our website at turbosound.com.
Unpacking the Loudspeaker
After unpacking the unit please check carefully for damage. If damage is
found, please notify your supplier at once. You, the consignee, must instigate
any claim. Please retain all packaging in case of future re-shipment. iP500
ships with a protective cover for the subwoofer and a shoulder bag for the
column segments. Make sure to keep these covers so you can protect your iP500
from unnecessary wear and tear! For iP1000 and iP2000, covers and shoulder
bags are available separately.
Assembly
iP500, iP1000 and iP2000 speakers ship with separate base and column
elements that will need to be assembled.
To assemble the speakers, follow these steps:
- Make sure the unit is switched off.
- Place the base unit onto a firm, level surface, with the column connection inputs facing upward.
- Align the speaker column over the base unit’s connection inputs with the column connectors facing downward.
- Lower the speaker column into the connection input and gently press downward until the column connectors slot into place.
Note : iP2000 and iP500 feature a 2-piece column assembly. Connect the lower column assembly to the base unit first, and then connect the upper column segment directly on top of the lower segment.
Once the column assembly is firmly slotted into place, the iP speakers will automatically make all power and audio connections between the base unit and the speaker column. Gracias por elegir un producto de altavoz Turbosound para su aplicación. Si desea obtener más información sobre este o cualquier otro producto Turbosound, visite nuestro sitio web en turbosound.com.
Controls
- CODER KNOB toggles between Graphic and Edit modes (when pressed) and changes parameter values (when rotated).
- LCD SCREEN displays the current DSP module and parameter settings.
- PROCESS button accesses the DSP signal processing menu.
- SETUP accesses the setup features menu.
- EXIT button saves changes and returns to the previous menu screen.
- ENTER button selects sub-menu or confirms parameter changes.
- INPUT A/INPUT B combo jacks accept input signals using XLR, balanced ¼” TRS or unbalanced ¼” TS connectors.
- LINK A/LINK B XLR connectors provide un-processed copies of the INPUT A or INPUT B signals.
iP DSP Menu Structure
*iPhone is a trademark of Apple Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license.
iP Series Analogue Connection
Despite their sophistication, iP speakers offer straightforward analogue
connectivity, and you can easily arrange the iP system to allow simple control
of levels from other devices, such as mixers. You can also daisy-chain
multiple iP speakers using only the analogue connections, and then directly
control the overall level from your mixer’s master fader. For example, you
have four iP speakers and a mixer with simple left-right stereo outputs. For
typical operation, set the DSP volume and input gain settings on all speakers
to a flat “0 dB” setting. Connect the mixer’s left and right stereo outputs to
the first two speakers’ analogue INPUT A connections (the left and right mixer
outputs will go to separate speakers). Then, run cables from the OUTPUT
analogue connections to the remaining two speakers. In a similar way,
subwoofers can also be linked to the analogue OUTPUT.
iP Series Bluetooth Instructions
Bluetooth Connection
To play audio from a Bluetooth-enabled device, you will need at least one iP
speaker and an iPad/iPhone/Android/Windows device with basic Bluetooth
connectivity. With a basic Bluetooth connection, all related iP DSP functions
must still be controlled directly from the iP rear panel via the rotary
encoder. For Apple iOS devices, you can also download a dedicated Turbosound
iP Bluetooth app from the App Store. This iP Bluetooth app allows you to
control a single or stereo pair of iP speakers, including all DSP functions,
remotely from your iOS device (see “Bluetooth Control” below for more
information).
Bluetooth Streaming
To stream Bluetooth audio with any Bluetooth device
(iPad/iPhone/Android/Windows, etc.)
Mono operation
- Enable Bluetooth on your remote device.
- Switch on your iP speaker and minimize the volume.
- Select “Pair device” from the iP speaker’s Bluetooth menu.
- Check that your remote device is searching for a connection.
- Once your device detects the iP speaker, select the iP speaker from your remote device’s menu (e.g., “Turbosound iP2000”).
- Wait until the remote device shows an active connection, and then check the speaker’s Bluetooth menu, which should display the name of the remote device
- Bluetooth music can now be streamed to your iP speaker. The stereo signal will automatically mix down to mono.
- The iP speaker will display the Bluetooth indicator on the main, top-level DSP screen.
Stereo operation
- Complete the steps above to connect the first speaker to Bluetooth audio.
- The first connected speaker automatically becomes the MASTER speaker.
- Switch on the second speaker, which becomes the SLAVE speaker.
- Select “Link speaker” from the SLAVE speaker’s Bluetooth menu.
- The SLAVE speaker will display “Slave linking…”
- Select “Link speaker” from the MASTER speaker’s Bluetooth menu.
- The MASTER speaker will display “Master Linking…”
- WAIT for the speakers to link.
- Once the linking process is complete, Bluetooth audio will stream to the two speakers. The MASTER speaker will receive the left channel, and the SLAVE speaker will receive the right channel.
- MASTER and SLAVE connection will be indicated on the main, top-level DSP screens.
Pad and Apple are trademarks of Apple Inc. Android is a trademark of Google Inc. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Connection
Connect audio sources such as microphones, instruments, or playback devices to
the designated inputs on the system. Use high-quality cables for reliable
audio transmission.
Bluetooth Control
A dedicated iOS control app for Turbosound Bluetooth speakers can be downloaded from the App Store. This iOS control app can be used with Bluetooth pairing, or without pairing if only analogue inputs are used.
Operation
Power on the system and adjust volume levels accordingly. Experiment with the
built-in settings to customize the sound output based on your preferences and
venue requirements.
Operation with Bluetooth Pairing
- In both mono and stereo mode, first pair the MASTER speaker, and then launch the iOS control app.
- The iOS control app will automatically detect and adapt for mono or stereo mode.
- To alter the speaker settings, swipe the screen or press the settings icon. All iP speaker settings can be accessed from the iOS control app.
Operation without Bluetooth Pairing (Analogue Input Only)
- Power on the first (usually left-hand) speaker – this speaker will become the MASTER speaker.
- Start the control app on the IOS device.
- Check that the app is connected and functioning with the single MASTER speaker.
- Power up the second speaker – this speaker becomes the SLAVE speaker.
- Check that the app’s Main Page shows both MASTER and SLAVE input and balance control.
IMPORTANT NOTE: The mounting of a permanently installed sound system may be dangerous unless undertaken by qualified personnel with the required experience and certification to perform the necessary tasks. Walls, floors or ceilings must be capable of safely and securely supporting the actual load. The mounting accessory used must be safely and securely fixed both to the loudspeaker and to the wall, floor or ceiling. When mounting rigging components on walls, floors or ceilings, ensure that all fixings and fasteners used are of an appropriate size and load rating. Wall and ceiling claddings, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular fixing arrangement can be safely employed for a particular load. Cavity plugs or other specialist fixings, if required, must be of an appropriate type, and must be fitted and used in accordance with the maker’s instructions. The operation of your speaker cabinet as part of a flown system, if installed incorrectly and improperly, can potentially expose persons to serious health risks and even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with qualified and certified (by local state or national authorities) personnel prior to any installation or flying. Make sure that speaker cabinets are set up and flown by qualified and certified personnel only, using dedicated equipment and original parts and components delivered with the unit. If any parts or components are missing please contact your Dealer before attempting to set up the system. Be sure to observe the local, state and other safety regulations applicable in your country. Music Tribe, including the Music Tribe companies listed on the enclosed “Service Information Sheet”, assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the product. Regular checks must be conducted by qualified personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the speaker is flown, the area underneath the speaker is free of human traffic. Do not fly the speaker in areas that can be entered or used by members of the public. Speakers create a magnetic field, even if not in operation. Therefore, please keep all materials that can be affected by such fields (discs, computers, monitors, etc) at a safe distance. A safe distance is usually between 1 and 2 meters.
Maintenance
Regularly clean the exterior of the system with a dry cloth. Avoid using
liquid cleaners or solvents that may damage the surface.
Other important information
Important information
-
Register online.
Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable. -
Malfunction.
Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product. -
Power Connections.
Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Turbosound
iNSPIRE iP2000/iP1000/iP500
- Responsible Party Name: Music Tribe Commercial NV Inc.
- Address: 122 E. 42nd St.1,
- 8th Floor NY, NY 10168,
- United States
- Email Address: legal@musictribe.com
- iP2000 FCC ID: QWHIP1000-2000
- iP1000 FCC ID: QWHIP1000-2000
- iP500 FCC ID : QWHIP500
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This equipment complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Operation of this equipment in a residential environment could cause radio interference.
Important information:
Changes or modifications to the equipment not expressly approved by Music
Tribe can void the user’s authority to use the equipment.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modification to this equipment. Such modifications could void the
user authority to operate the equipment.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance of 20 centimeters between the radiator and your body.
Hereby, Music Tribe declares that this product is in compliance with
Directive
2014/35/EU,Directive 2014/30/EU, Directive 2011/65/EU and Amendment
2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and
Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K, Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 8th Floor, 20 Farringdon Street London EC4A 4AB, United Kingdom
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
FAQ
Q: Can I use the iNSPIRE iP series outdoors?
A: It is not recommended to expose the system to rain or extreme moisture
conditions. Indoor use is ideal for optimal performance and longevity.
Q: How do I troubleshoot if there is no sound output?
A: Check the audio connections, power supply, and volume settings. Ensure that
the audio source is functioning correctly before contacting customer support.
Q: Can I connect multiple iNSPIRE iP units together?
A: Yes, you can daisy-chain multiple units for expanded sound coverage. Refer
to the user manual for detailed instructions on connecting multiple systems.