Sunnydaze DECOR MCA-2471 Relaxing Rain Galvanized Steel Water Fountain Instruction Manual
- July 31, 2024
- Sunnydaze DECOR
Table of Contents
- MCA-2471 Relaxing Rain Galvanized Steel Water Fountain
- Specifications:
- Product Usage Instructions:
- Assembly:
- Care & Maintenance:
- Troubleshooting:
- Q: Can I use bleach or chlorine to clean the fountain?
- Q: What should I do if there is air trapped in the pump?
- Q: What kind of maintenance voids the product warranty?
MCA-2471 Relaxing Rain Galvanized Steel Water Fountain
Specifications:
-
Product Name: Relaxing Rain Galvanized Steel Water
Fountain -
Model Number: MCA-2471
-
Material: Galvanized Steel
-
Components: Fountain Body, Basin, Electric Submersible Pump, AC
Adapter, Bolt Set, Hex Key -
Power Source: Electric
-
Warranty: One-year limited warranty
Product Usage Instructions:
Assembly:
-
Do not discard the sponge-like polyurethane foam filters in the
top and bottom of the fountain. -
Attach the light cable to the pump cable.
-
Connect the pump to the water tube in the fountain body.
-
Thread the pump power cord through the hole in the sidewall of
the fountain body. -
Fill the basin with clean water to submerge the pump
fully. -
Place the fountain body onto the basin and secure it with four
bolt sets. -
Connect the AC adapter to the pump power cord.
-
Plug the power cord into a grounded outlet.
-
Check and adjust water flow before securing the fountain body
completely.
Care & Maintenance:
Avoid using harmful additives or abrasive materials to clean the
fountain. Do not use a pressure washer. Regularly check and clean
the filters.
Troubleshooting:
If you encounter assembly issues or damage during shipping,
contact customer service with your item number and order
information for assistance.
FAQ:
Q: Can I use bleach or chlorine to clean the fountain?
A: No, do not use harmful additives like bleach or chlorine to
clean the fountain as it may damage the materials.
Q: What should I do if there is air trapped in the pump?
A: If there is air trapped in the pump, allow several minutes
for it to escape by running the pump.
Q: What kind of maintenance voids the product warranty?
A: Any modifications to the product or use of harmful chemicals
for cleaning will void the warranty.
Purchase Date: / / Order/Customer Reference Number: Thank you for choosing
Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the
1-year warranty period. Proof of purchase, with the date of purchase as well
as photos of the merchandise defect, must be provided. Photos are used to
determine the cause of defects and for future quality control. Register your
warranty at https://tiny.cc/SunnydazeWarranty If you have any questions,
comments or concerns, feel free to contact us by phone at
833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
https://tiny.cc/SunnydazeContact
RELAXING RAIN GALVANIZED STEEL WATER FOUNTAIN
MCA-2471
Review all assembly and care information before using this product. Save this
manual for future reference. Select a smooth, level surface to place the
fountain.
Assemble components on a soft, clean surface to avoid scratching or damaging
the finish.
Inspect packaging to ensure all parts are accounted for before disposing of
packing materials.
Save the packing slip.
IMPORTANT NOTES:
· The nylon strings in the fountain body cannot be replaced or repaired.
· The water tubing is built into the fountain. Take care when handling the
water tube; detaching the water tube from the fountain will damage the unit
and void the warranty.
· Sponge-like polyurethane foam filters in the top and bottom of the fountain
body help control water flow and catch debris do not remove these filters.
· Familiarize yourself with the flow control regulator on the front of the
pump as it may need to be adjusted to achieve optimal water flow.
Parts
Qty.
Fountain Body
1
Basin
1
Electric Submersible Pump 1
AC Adapter
1
M8x35mm Bolt Set
4
Included Tools Hex Key
WARNING
CHOKING HAZARD — This item contains small parts that can be swallowed. Keep
children and pets away during assembly.
MCLST272
03/2024
Page 1 / 3
ASSEMBLY
IMPORTANT: Do not discard the sponge-like polyurethane foam filters in the top
and bottom of the fountain.
1. Locate the light cable on the underside of the fountain body and firmly
attach it to the short cable on the pump.
2. Firmly connect the pump to the water tube that is built into the fountain
body.
3. Run the pump power cord up through the hole in the sidewall of the
fountain body.
4. Fill the basin with enough clean water to keep the pump fully submerged
during operation.
5. Ensuring the pump remains upright and the water tube does not become
kinked, place the fountain body onto the basin and secure using four bolt
sets.
6. Firmly connect the AC adapter to the pump power cord.
7. Plug the power cord directly into a properly grounded GFCI outlet.
TIP: Check and adjust the water flow before securing the fountain body to the
basin.
NOTE: When first used, there may be air trapped in the pump. It may take
several minutes for trapped air to escape, allowing water to flow.
Care & Maintenance
· Some splashing may occur; adjust the flow rate on the pump if the water rate
is too high or low. · Some climates and weather conditions increase water
evaporation, requiring water to be added more frequently.
During high temperatures, windy conditions and long-term exposure to direct
sunlight, frequently check water levels to ensure the pump remains submerged
underwater. Never allow the pump to run dry as doing so will burn out the
motor. · Only use water in this fountain. Distilled water helps prevent
mineral buildup but is not required. Tap water is okay to use, but avoid
heavily chlorinated water as it may damage the pump and fountain finish. ·
Periodically change the water to help keep the fountain and pump clean. Remove
scale and buildup regularly.
DO NOT use harmful additives such as bleach, chlorine, etc. DO NOT use
anything abrasive to scrub the fountain. DO NOT use a pressure washer to clean
the fountain.
MCLST272
03/2024
Page 2 / 3
· Use extreme caution when cleaning the nylon strings, they cannot be replaced
or repaired. · Over time, exposure to sunlight may change the color of the
finish; this is part of the natural aging process and is not
cause for return. · Always unplug the power supply before cleaning and
maintaining the fountain and the recirculating pump. Take care
when handling the pump; only pick the pump up by the body, never the power
cord. · During freezing weather, drain the fountain, disconnect the pump and
store indoors; allowing ice to form may damage
the fountain in such ways as, but not limited to, lighting malfunctions and
permanent pump damage. · Manufacturer is not liable for damages caused by
exposure to weather elements.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS CAUSED BY THE
APPLICATION OF CHEMICAL TREATMENTS, PROTECTIVE COATINGS, TOUCH-UP PAINT, OR
CLEANING PRODUCTS.
Troubleshooting
· If water is not flowing within several moments of the fountain being plugged
in, ensure the pump is fully submerged underwater. Add water to the reservoir
if necessary. There may also be air bubbles trapped inside the pump, which can
prevent water from circulating properly. Unplug the power supply for a few
moments and plug it back in.
· Check the flow control on the body of the pump, it may need to be adjusted
to achieve the desired water flow rate.
· Inspect the pump, tubing, and foam filters for obstructions.
· Some pump noise is normal. Excessive pump noise can be caused by low water
level, trapped air, or the pump being too close to the wall of the fountain.
Try adding water or moving the pump to help reduce noise. If noise persists,
try gently tapping the pump with your finger to help release trapped air.
· If the light is not working, ensure the cable is fully connected and the
seal is adequately tightened (do not over-tighten). · If the fountain is not
running after several moments, ensure the adapter is fully connected to the
pump power cable.
· Ensure the power outlet is working. When in doubt about electrical
connections, consult a certified electrician.
SAFETY STATEMENTS & WARNINGS
· Fountains may splash or leak; always protect surfaces that can be damaged by
water. Do not use fountain in areas that can be damaged if water splashes or
leaks.
· Prevent water damage to electrical sockets by ensuring the power cord has a
drip loop; refer to the diagram on the right.
· Keep fountain out of reach of children and pets. · Make sure the power cord
is away from traffic areas. · Keep power cord away from all heat sources. Do
not use electrical cords in areas with high
temperatures. · Check the water level frequently to ensure the pump remains
fully submerged; never allow the
pump to run dry as it will burn out the motor. · Always unplug the power
supply before cleaning and maintaining the fountain and the pump. · Always
empty and store the fountain and pump indoors during freezing weather.
Drip Loop
Drawing is for visual reference only, power cord access and adapter vary by
fountain.
Any modification to the product or failure to follow recommended care will void the product warranty.
If you experience issues with assembly or the product was damaged during
shipping, please contact our customer service team through one of the methods
mentioned at the top of page 1.
Please have the item number and order information ready to expedite response
time.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal
injury, property damage or loss, whether direct or indirect, or incidental,
resulting from the incorrect attachment, improper use, inadequate maintenance,
or neglect of this product.
MCLST272
03/2024
Page 3 / 3
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>