WaterFurnace Versatec 300 Water Source/Geothermal Heat Pump Console Owner’s Manual
- July 31, 2024
- WaterFurnace
Table of Contents
Versatec 300 Water Source/Geothermal Heat Pump Console
“`html
Specifications:
-
Product Name: Versatec 300 Water Source/Geothermal Heat Pump
Console -
Model: 0.75 – 1.5 Ton
-
Formerly Known As: Envision Consoles Low Sill (LC)
Product Information:
The Versatec 300 Series Low Sill Consoles are designed for
spaces without ductwork, such as classrooms, offices, and hotels.
They offer cutting-edge heating and cooling technology with
features that ensure efficient operation and ease of
installation.
Key Features:
-
Compressor: Single speed rotary compressors
available in commercial single-phase voltages. -
Water Lines: 1/2 Copper FPT waterline
connections for easy installation. -
Coaxial Heat Exchanger: Oversized design for
maximum heat transfer with copper inner tube and steel outer
tube. -
Aluminum Air Coil: Provides durability and
high efficiencies with optional AlumiSealTM coating. -
Cabinet: Constructed of heavy gauge galvanized
steel for corrosion resistance. -
Refrigerant Circuit: Utilizes low GWP
refrigerant with thermostatic expansion valve for optimum
flow. -
Controls: Compressor Control Module standard,
optional Aurora Microprocessor Control available. -
Fan Motor: High-efficiency 3-speed ECM fan
motor.
Product Usage Instructions:
-
Installation: Ensure proper placement and
connection of water lines, electrical disconnects, and optional
features like the internally trapped drain line. -
Operation: Use the controls to set desired
heating or cooling settings. Monitor performance indicators for
efficient operation. -
Maintenance: Regularly clean air filters,
check water lines for leaks, and schedule professional maintenance
as needed to ensure optimal performance.
FAQ:
Q: What should I do if the console is not heating or cooling
properly?
A: Check the thermostat settings, air filters,
and ensure that the unit has power. If issues persist, contact
customer support for assistance.
Q: Can I retrofit the Versatec 300 Series Console into an
existing system?
A: Yes, the footprint of the console is
designed to match legacy consoles for easy retrofitting, making it
a convenient upgrade option.
“`
Versatec 300
Water Source/Geothermal Heat Pump Console 0.75 – 1.5 Ton
Formerly known as Envision Consoles Low Sill (LC)
VERSATEC 300 | 0.75 – 1.5 TON
Versatec 300 SERIES LOW SILL CONSOLES
Perfect for classrooms, offices, hotels, or any room without ductwork, the
Versatec 300 Series Console delivers cutting edge heating and cooling
technology. A single speed low GWP rotary compressor is the heart of the
console, which is available in a variety of cabinet and piping configurations.
It features the ability to operate across a wide range of loop temperatures
and its footprint is designed to match “legacy” consoles for easy
retrofitting.
Over the last 30 years, WaterFurnace has built its reputation on innovation,
quality, and customer satisfaction. We’re committed to providing the highest
quality products and the most extensive support network in the industry. By
specifying WaterFurnace 0.75 – 1.5 ton Versatec 300 Series Low Sill Consoles,
you can rest assured your customers are investing in a product with superior
quality and performance.
Efficient operation with a compact footprint–Versatec 300 Low Sill Consoles will fit any ductless application.
KEY FEATURES
COMPRESSOR: Single speed rotary compressors. Available in commercial single
phase voltages.
WATER LINES: 1/2 Copper FPT waterline connections are located on the end of
the chassis for ease of installation.
COAXIAL HEAT EXCHANGER: Oversized and convoluted with copper inner tube
(optional cupronickel) and steel outer tube, designed for maximum heat
transfer at normal and low water flow rates to minimize pressure drop.
ALUMINUM AIR COIL: An aluminum air coil is featured in all Versatec 300
Console units to provide exceptional durability and high efficiencies. Added
protection is also available with an optional AlumiSealTM coating.
CABINET: Constructed of heavy gauge environmentally-responsible galvanized
steel for maximum corrosion resistance. All cabinets finished with beige
textured epoxy powder coating on both sides for added protection. Fits
“legacy” console footprints.
REFRIGERANT CIRCUIT: Units utilize low GWP refrigerant in sealed circuits.
Metering accomplished with thermostatic expansion valve to deliver optimum
refrigerant flow over a wide range of conditions without troublesome check
valves. Four-way solenoid activated reversing valve faults to heating and is
“cool brazed” at the factory.
CONTROLS: The Compressor Control Module (CCM) comes standard and provides a
more reliable alternative to electro-mechanical systems. The full featured
Aurora Microprocessor Control with expanded unit sensors is also available as
an option. The optional Aurora UPC Control adds N2 and BACnet compatibility
along with unit or wall mounted sensors or wall mounted thermostat options.
FAN MOTOR: All units come with a high efficiency 3 speed ECM fan motor.
ELECTRICAL DISCONNECTS: Optional, field installed fused or nonfused electrical
disconnect available. Fused sizes available in 10, 12, 15, 20 and 25 amp
fuses.
ADDITIONAL OPTIONS:
· EXTENDED RANGE COAXIAL HEAT EXCHANGER AND PIPING INSULATION
· CABINETS AVAILABLE IN FLAT OR SLOPE TOP WITH AN EXTENDED CABINET OPTION
· LEFT OR RIGHT CONTROLS · STAINLESS STEEL CONDENSATE DRAIN PAN WITH
INTERNALLY TRAPPED DRAIN LINE
VERSATEC 300 | 0.75 – 1.5 TON
C
A B
Flat Top
Model 009 – 012
A
B
C
45.0
10.8
22.5″
015 – 018
50.0
12.8
22.5″
8
C A
B
Slope Top
Model 009 – 012
A
B
C
45.0
10.8
24.0″
015 – 018
50.0
12.8
24.0″
Blower Option Switch Control Panel
(Remove For Access To Control Box)
Wall Mount for Chassis with Flat Top Cabinets
Handy Box
Optional Fused/
Non-fused Disconnect
Optional Ball Valves
Optional Hose Kits
Inside the Low Sill Console
Air Filter
ASK US HOW YOU CAN SAVE UP TO 50% ON YOUR NEXT COMMERCIAL PROJECT
With the Inflation Reduction Act, projects completed with a geothermal loop
and heat pumps may qualify for: · 30% bonus rate · 10% bonus rate for domestic
content · 10% Energy Community bonus · Up to $5 per square foot tax deduction
· 5-year accelerate depreciation and a 1-year
bonus depreciation
SCAN TO LEARN MORE
Performance Data and Unit Ratings can be found on Contact your WaterFurnace Sales Representative for assistance.
.com
All Versatec 300 Series consoles are safety listed under UL 60335-2-40 through ETL, and performance listed with AHRI in accordance with ASHRAE/ANSI/AHRI/ISO Standard 13256-1.
BCV3-0008W 07/24
visit us at waterfurnace.com
WaterFurnace International, Inc., 9000 Conservation Way, Fort Wayne, IN 46809-9794. WaterFurnace has a policy of continual product research and development and reserves the right to change design and specifications without notice. ©2023 WaterFurnace International Inc. Printed with 10% post-consumer waste recycled paper.