Patpet T720 Intelligent 2 in 1 Remote Dog Training and Automatic Bark Control Collar User Manual

T720 Intelligent 2 in 1 Remote Dog Training and Automatic Bark Control

Collar

“`html

Product Information

Specifications:

• Model Number: T720
• 2 in 1 Remote Dog Training Collar & Automatic Bark Control
  Collar

Product Usage Instructions

Charging Instructions:

1. Charge the remote transmitter:

2. Connect the charger cable to the charging port.

3. Plug the charger into a standard outlet.

4. Turn the Transmitter on and off:

5. Press power button to turn on/off the Transmitter. The
   backlight will stay for about 30 seconds.

6. Charge the collar receiver:

7. Open the rubber cover, connect the receiver to a charger into a
   standard socket.

8. The LED flash light on the receiver turns red when
   charging.

Using the Receiver Collar:

• To turn the Receiver Collar on: Press the power button once,
  the red LED light will flash every 8 seconds.

• To turn the Receiver Collar off: Press the On/Off Button once,
  the red LED light will stop flashing.

Wearing Receiver Collar Correctly:

1. Place the receiver on the bottom of your pet’s neck with the
   screw cap directly contacting the skin.

2. If your pet has thick fur, use longer screw caps.

3. Maintain a finger distance between Receiver Collar and Pet’s
   Neck for proper fit.

Reinforce Learning Behaviours:

If your dog knows the command but responds inconsistently, use
the training collar to sharpen his skills. For example, if your dog
responds slower to commands, utilize the remote trainer for
immediate response.

Frequently Asked Questions (FAQ)

Q: How often should I use the training collar?

A: Training should be consistent but not excessive. Work on
commands a couple of times per day without increasing
stimulation.

Q: Is the training collar safe for my pet?

A: When used properly and with care, the training collar can be
a safe and effective tool to train and strengthen your bond with
your pet.

“`

Intelligent 2 in 1 Remote Dog Training Collar & Automatic Bark Control Collar
User Manual

Model Number:T720 Please read this entire guide before using!
1

.

.Flashlight:It has different shows when charging and work,the following will introduce it.

11.Contact points (static stimulation): choose
a suitable length to fit for different thickness dog hair, can conduct static easier and train your dog conveniently.

9

10

Receiver

How to Use

Important notice
A start up roller is contained inside the receiver, if you hear sound when shaking the receiver, please do not suspect if it has any parts falling off.

Note: Please charge before using the product! 1. Charge the remote transmitter: (1) Connect the charger cable to the charging port. (2) Plug the charger into a standard outlet. (3)

2. To turn the Transmitter on and off (1) Press power button to turn on /off the Transmitter. The backlight on/off. (2) The backlight will stay for about 30 seconds. if no operation then backlight off.
3. Charge the collar receiver: (1) Open the rubber cover, connect the receiver to a charger into a standard socket. (2) The LED flash light on the receiver turns red when charging. (3) Once the receiver is fully charged, the red LED flash light will turn off automatically.
To turn the Receiver Collar on Press the power button once, the receiver will has a short”beep” sound, now the receiver is turned on. And the red LED light will flash one time every 8 seconds.
To turn the Receiver Collar off. Press the On/Off Button once, the receiver will has a “beep” sound and no red LED light flash any more.
5

How to Wear Receiver Collar Correctly
1.Correct wearing position helps healthy and effective pet training. Receiver shall be placed on bottom of your pet’s neck, and the screw cap must contact pet’s skin directly. put the conductive silicone on the prong to the bottom
2.If your pet has a thick fur in the neck place, please use longer screw caps.
3.The soft silicone prong is also with conductive function, could put it on to prevent rusty.
4.The anti-abrasion buckle could prevent skin abrasion, we suggest to use it 2-3 times a week.
5. The space between Receiver Collar and Pet’s Neck shall be maintained to a finger distance, can’t be too loose, otherwise static effectiveness shall be badly influenced.
6. Too long Receiver Collar can be trimmed, or be handled with other methods.
9

Reinforce Learning Behaviours
If your dog knows the command but responds inconsistently or acts slower than your requirement, a training collar can sharpen his skill.
For example, you have taught your dog to come when called, but over time he responds slower. You can communicate with him via the remote trainer, so that he immediately responds to your call.
1. Set the collar to initial stimulation level and test it. 2. Fit the collar on your dog’s neck along with his regular collar. 3. Let him roam around the training area. Then give the command and simultaneously press the stimulation button. 4. The instant your dog moves toward you, stop stimulation and praise him. 5. If he stops before he reaches you or turns away repeat the command and continue the stimulation. Again, stop at the instant he runs to you and reward him by praising him or feeding him a treat. Repeat this for 3 or 4 times.
Tips 1. If he doesn’t get it for the first few times, don’t give up and do not increase the stimulation. Try to work on this a couple of times per day.
2. During the training period never give the command if you are not able to enforce it. Your dog has to make the mental connection between the static stimulation/ vibration/beep to his behaviour (may take a week or more for some dogs).
Altogether, both methods of stopping unwanted behaviour and reinforcing learning behaviours can be applied to nearly every training scenario. Training collars are used to train the dogs and not for punishment. Use properly and with care and the collar can be a safe and effective tool to train, build communication and strengthen your bond with your best friend.
2
Warm Notice
1. Charge the remote transmitter and receiver at least 2 hours for the first charging. 2. 3. The receiver will turn off automatically when battery energy is low after 10 seconds “beep” sound. 4. This product is rechargeable. In order to keep it continuous use,please charge it once a monthly if it is not used.
6. How to pair the Transmitter and Receiver (1) Turn on the remote and select one of the dog channel by pressing the CH
button. (2) Adjust the levels by pressing”+” or”-” button (ensure the level is above 1). (3) Turn on the receiver, the receiver will have a short “beep” sound, and the red
LED light will flash one time every 8 seconds. (4) Hold power button of receiver for 2 seconds again, the indicator light will be
fast flashing for 10 seconds, press the function button(static stimulation/vibration/ tone, any one of them) within 10 seconds. Then when you press function button, the receiver will emit corresponding sound, vibration and static stimulation. Confirm the pairing is successful. (5)
6
Regular Maintenance
1.Please examine regularly to ensure tightness of Remote Transmitter and eliminate any external damages. 2.Clean the screw caps with alcohol weekly. 3.Examine your pet’s neck and carry out weekly cleanup.
Attention
1.High-end transmission technology is used in the remote control Transmitter, no need to aim directly to Receiver Collar, the signal can go through obstacles such as walls and other things, but the effective distance will be decreased. 2. A list of factors, including but not limited to signal station, magnetic field, obstacle, battery volume, other wireless devices nearby, landform, vegetative cover, etc, shall also influence transmission of signals from remote transmitter and the actual effective distance of the Remote Transmitter.
Frequently Asked Questions (FAQ)
Q: How old my pet can use Pet Training systems? A: DO NOT use on puppies younger than 6 months. Q: Once my pet is trained and has been obeying my commands, is it still necessary for my pet to continue to wear the Receiver C o l l ar? A: You may need to reinforce your pet’s memory with the Receiver Collar from time to time. Q: Can I use Pet Training systems with more than one pet? A: Yes, you can simply add one or two Receiver Collars to the system to control two or three pets, because three dog channels are available with the Remote Transmitter. Q: What is the effective distance of your Pet Training systems? A: The effective distance could be as far as 1100 Yards between Remote Transmitter and Receiver Collar without obstacles in between. However in reality, a list of factors, including but not limited to signal station, magnetic field, obstacle, battery volume, other wireless devices nearby, landform, vegetative cover, etc, will influence transmission of signals from Remote Transmitter and the actual effective distance of Remote Transmitter.
10

1. Intelligent 2 in 1 Remote Dog Training Collar & Automatic Bark Control Collar, One-Click Switching, convenient operation. 2. Maximum remote range up to 1100 yards in the open area without any interference. 3. With power button on remote, anti-misoperation setting. 4. 4 training modes: Tone/Vibration /Static Stimulation/Light; 1-100 Adjustable Intensity Levels for Vibration and Static Stimulation.
5. IPX6 Waterproof Receiver Collar and IPX5 Waterproof Transmitter. 6. Receiver collar with 650mAh ultra-large capacity lithium battery. 7. Meet customer’s personalized customization needs.
8. Train up to 3 dogs with one remote transmitter (separately purchase
additional receiver). 9. Rechargeable receiver and transmitter.

3

Warm Notice
1. Please keep in mind the dog channel you choose, Please do not change to another one or the remote control will be invalid. 2. manual when you use it at the first time. 3.
4. When the transmitter turned off, it will not produce any functions when press

5. once it is wobbled.

light. The receiver can be reactivated

Test Pet Training System
Static stimulation function test
Static stimulation function can not be seen with the naked eye, please use our test light. Press the static stimulation function button, the test light will shine.

Vibration function test
Press the vibration function button, the receiver will shake.
Tone function test
Tone function does not need to adjust. Press the tone button, the receiver will make a sound.
7

Q: I want to test Static Stimulation function of Receiver Collar at my finger, but it does not work, is anything wrong? A: If you test Receiver Collar by your hand or leg, please touch the 2 screw caps (electrodes) at the same time, touching only one screw cap (electrodes) will not work.
Q: What’s the function of anti-abrasion buckle? A: 1. Use the anti-abrasion buckle could prevent skin abrasion, avoid hurt of dog’ skin when wearing the iron column (rubber column) for long, and also it could be insulated from electricity.
2. After stop using the device, but the dog starts to bark again, we can use the anti-abrasion buckle and let the dog keep wearing the device. 3. When it becomes better after using the device for several times, dog doesn’t bark, please use the anti-abrasion buckle.
Q: What do I do if my pet’s neck becomes red and irritated? A: Discontinue use of the pet training systems for a few days. If the condition persists beyond 48 hours, see your veterinarian. Even if the skin returns to normal, monitor your pet’s skin condition closely.
Q: Can I attach a leash to the Receive Collar?
A: NO. This can result in pulling the Screw Caps (contact points) too tightly against your pet’s neck. Use a separate collar placed above the Receiver Collar.
Q: How will I know when to charge the batteries of the Pet Training systems? A: For Remote Transmitter: the symbol will show up on the left down side of LCD screen. For Receiver Collar: if you hear 10 Seconds beep sound, you have to get it charged.
Q: How long can I leave Receiver Collar on my dog? A:The Receiver Collar is not designed to be worn constantly. We recommend the Collar not be worn for more than 12 hours out of every 24hour period. In case of longer time, you are advised to examine your pet regularly.
Q: How long should I process my training session for my pet? A: Training sessions should be kept positive and short, it is better for about 10-15 minutes long each time.
11

Key Definition
æ Power button: 1.Press to turn the transmitter on and off; 2.Press to turn
the mode of automatic anti bark collar on and off. ç Tone button: Press the tone button and the receiver beeps once. Tone level
is not adjustable. è Static stimulation button: Press the stimulation button and the receiver emits
an electrostatic stimulation once. é Vibration Button: Press the vibration button and the receiver emits a vibration
once.
ê The +/- button: Adjust the levels of vibration and static stimulation from 1-100.
ë Channel button: Press to select a dog channel (dog1/dog2/dog3). ì LED light button.

Vibration level
1 4

Stimulation level
4

Remote transmitter

Description on the modes between Remote Dog Training and Automatic Anti Bark:
I. This model could also be used as Automatic Anti Bark Collar. Turn on the remote, press and hold the remote power button for 3 seconds, if the receiver beeps twice, it means the anti bark collar function is off now. Press and hold the remote power button for 3 seconds, if the receiver beeps once, the anti bark collar function is on now. II. The automatic anti bark function has been set as the factory default setting before the shipment, therefore,there is no need to adjust individually. Could be wore on the neck of dogs directly when turn on the power. III. Following is how the automatic anti bark mode works: c1When the dog barks, the anti-barking device will produce a 2 -second warning sound. c2When the second bark occurs within 30 seconds, the device will produce a 3-second warning sound.
(3)When the third time bark within 30 seconds, the anti-barking device will play a warning sound for 5 seconds along with a weak static stimulation punishment to the dog, to remind the dog of remembering not barking when hearing the warning sound.
(4) This kind of training will repeat for 7 times. The 1-2 times are warning sound only, If the dog keep barking, it will trigger the 3-7 times sound + static mode. The strength of the static stimulation increases step by step, to correct the dogs behaviour. IV. Automatic Protection Mode: c1 No matter how many times the barking device activates, it will be reset automatically and return to the initial standby state when the dog stops barking for 30 seconds. c2 In order to protect the dog, the indicator light will enter into the fast flashing state when the device keeps working for 7 times, and the barking device will stop working for 1 minute and enter into the initial standby state.
Sensor hole
8
Q: What are the proper levels of Vibration and Static Stimulation for my pets? A: Try to find the best suitable levels of Vibration and Static Stimulation for your pet starting from the lowest level. Excessive levels of stimulation shall cause strong response from your pet.
Q: Any other better training methods? A: You can prepare some dog food for training incentive to achieve better training outcomes. Each time after you restrain your pet’s misbehavior, you can tell your pet what is supposed to do and what is not supposed to do. And after a number of repetitions your pet understand what you like and what you don’t like.
Q: How long will it take to get my pet trained well? A: It takes time to eliminate a misbehavior or teach an obedience command. Please be patient. Overquick training may not lead to ideal outcomes.
Q: The pet training systems does not work, or my pet does not respond after correct installation of the pet training systems, how should I solve this problem? A: 1. Make sure both Remote Transmitter and Receiver Collar have
enough power to operate. 2. Check to see if Receiver Collar is turned on. 3. Check “CH ” button on Remote Transmitter to ensure Dog Channels
are correctly configured. 4. Try re-pairing Remote Transmitter and Receiver Collar. 5. Take off Receiver Collar and test all of the three functions
work properly. 6. Receiver Collar goes into Standby mode after 4 minutes
without movement. And any gentle movement can activate it. 7. Make sure Receiver Collar is properly worn and the collar can’t be too
loose. 8. Trim your pet’s fur where the screw caps (contact points) touch the neck
and/or change to the longer contact points.
12

FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
13

The device has been approved for use in EU countries and is therefore provided with the CE mark. All necessary documentation is available on the website: www .electric-collars.com Changes to technical parameters, properties and printing errors reserved.
Service center and distribution Reedog, sro Sedmidomky 459/8 101 00 Prague 10 Phone: +1 646 980 4569 Email: info@electric-collars.eu

References

• The domain name collars.eu is for sale
• ★☆ Electronic training collars for dogs ☆★ - Electric-Collars.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>