WORK NEO IP Series Loudspeakers User Guide
- June 3, 2024
- WORK
Table of Contents
WORK NEO IP Series Loudspeakers
OVERVIEW
The NEO IP Series consists of a series of models of installation loudspeakers with different output power depending on the model and with a high IP range (P65), which makes it suitable for indoor and outdoor installations The models in this series are sold in pairs. They are passive elements with a low impedance connection of 80 and a transformer for 100V line with 4 different output power positions. In this way, the power at low impedance covers from 40W to 70W and for 100V line from 2W to 32M. Made of polypropylene and sold in pairs, they include wall fixing brackets and are available in white or black.
Technical Data:
NEO 5 IP | NEO 6 IP | NEO 8 IP | |
---|---|---|---|
LF Driver | 5.25″ | 6.5″ | 8″ |
HF Driver | 0.5” | 1 “ | 1 “ |
Low impedance output | 40W@80 | 60W@80 | 70W@80 |
1 OOV Line | 2W/4W/8W/16W | 4W/8W/16W/32W | 4W/8W/16W/32W |
Sensitivity | 88 dB | 92 dB | 93 dB |
SPL max. | 100 dB | 109 dB | 111 dB |
Frequency Range | 60Hz-20kHz | 80Hz-20kHz | 75Hz-20kHz |
Horizontal Coverage | 90° | 120° | 120° |
Vertical Coverage | 70° | 90° | 90° |
IP Rate | IP65 | IP65 | IP65 |
Dimensions (WxHxD) | 170x240x170 mm | 170x290x200 mm | 240x370x260 mm |
Weight | 2.3 Kg | 3.1 Kg | 4.95 Kg |
FEATURES
- Series of 2-way passive loudspeakers–
- IP65 range for indoor and outdoor applications
- Output for low impedance and 100V line amplifiers
- Made of polypropylene
- Metal grid
- Available in black or white
CONNECTIONS
INSTALLATION
CAUTIONS
- If you need connect to loudspeaker to 70, 100V line position, the cables marked as 2 & 3 (Orange, Green colours), corresponding to 80, MUST BE CONNECTED BETWEEN THEM (Check the label in the rear side)
- Make sure to select the correct power cable before connecting the loudspeaker to a 70/100V line amplifier. If the low impedance position (80), is selected, the loudspeaker COuld be damaged!
ADVANCED USE
NEO IP Series include a pair of plastic wal-mount bracket. Please, follow the next instruction to mounting it.
Mounting Process
Use the wall mounting part (1) to mark the fixing points on the wall. Take into account the dimensions between holes and the diameters marked in figure
- Drill wall and insert wall fixings. Screw wall mounting part to wall. Ensure that suitable screws and wall fixings are used. If in any doubt contact a suitably qualified expert.
Mount (3), (4) & (5) as shown in figure 2. Screw the threaded ball (4) into the threaded insert on the rear of the loudspeaker (6). Tighten M10 nut (5) against the loudspeaker with a spanne The assembly will now be as shown in figure 3.
Mount (3), (4)& (5) as shown in tigure 2. Screw the threaded ball (4) into the threaded insert on the rear of the loudspeaker (6). Tighten M10 nut (5) against the loudspeaker with a spanne The assembly will now be as shown in figure 3.
WARNING : The maximum loading of this bracket (10 kg), must never be exceeded. No other items must be suspended or attached to the bracket or speaker enclosure.
EQUIPSON, SA. Avda. El Saler, 14 Pol. Ind. L’Alteró 46460-SILLA Valencia- Spain www.equipson.es support@equipson.es
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>