SIIG CE-H28411-S1 4K HDMI USB KVM Extender over Cat6 User Manual
- July 31, 2024
- SIIG
Table of Contents
4K HDMI USB KVM Extender over Cat6 – 230 feet
– Zero Latency
User Manual
04-1423A
P/N: CE-H28411-S1
Features
- Extend 4K@30Hz video up to 130ft/40m , 1080p@60Hz video up to 230ft/70m through a Cat6 or above network cable with zero latency
- Supports USB extend for keyboard & mouse only
- Built-in EDID, HDMI 4K@30 4:4:4 8bits
- Supports HDR 10 & HDCP 1.4
- HDMI Audio Format: PCM 2/5.1/7.1, Dolby 5.1/7.1, DTS 5.1/7.1
- Supports wireless keyboard & mouse combos, multimedia function keys, wake up PC from sleep
- Lightning Protection, Surge Protection, ESD Protection
- Automatically adjusts parameters to match different network cables and achieve the best display performance
Package Contents
- Transmitter & Receiver
- Power adapter DC 5V/1A x2
- USB Type-A to A cable
- User Manual
Layout
Transmitter (TX)
-
Power jack: DC 5V/1 A
-
HDMI Input: Connect to HDMI source
-
Reset Button: Press to restart the device
-
RJ4S Out: Connect to Receiver with Cat6 cable
-
KVM Indicator:
Light Off: the USB port and the computer have not established a connection
Light Flash: the KVM data is transmitting
Steady On: the USB port is connected to the computer, but no KVM data is transmitted -
Power/Signal Indicator:
Light Flash: it is powered on, but no video data is transmitted
Steady On: the video data is transmitting -
USB Port: Connect to the USB port of PC for receiver’s Keyboard & Mouse use.
Receiver (RX)
-
Power jack: DC 5V/1 A
-
HDMI Output: Connect to HDMI display
-
Reset Button: Press to restart the device
-
RJ4S In: Connect to Transmitter with Cat6 cable
-
KVM Indicator:
Light Off: the USB port and the computer have not established a connection
Light Flash: the KVM data is transmitting
Steady On: the USB port is connected to the computer, but no KVM data is transmitted -
Power/Signal Indicator:
Light Flash: it is powered on, but no video data is transmitted
Steady On: the video data is transmitting -
USB Port: for keyboard & mouse only Supports wireless keyboard & mouse combos, multimedia function keys, wake up PC from sleep
Application
- PC
- USB cable
- HDMI IN
- TX
- Power
- Network cable
- RX
- USB
- HDMI OUT
- Keyboard/mouse
- HDMI Display
Q & A
Q: Why the Power LED is off?
• Please check if the power supply is connecting well and the output voltage
value is correct as recommended 5V/1A.
Q: Why does the power indicator always flashes?
• Check whether the network cable is uses IEEE-568B wiring standards.
• Check whether the source device and the transmitter are connected well.
• Reset the transmitter or receiver and connect it again.
Q: Why is the output image unstable?
1. Check whether the length of the UTP cable connected from TX to RX is
within 4K@30Hz video up to 130ft/40m, 1080p@60Hz video up to 230ft/70m
2. The length of HDMI cable is recommended to be ≤33ft/1 0m.
Dear Valued Customer
WE REALLY
APPRECIATE
YOUR PURCHASE
~thank you~
Support
For more info or tech support
http://www.siig.com/support
Mar. 2024 Copyright © 2024 by SIIG, Inc. All rights reserved.