Disney DN19 Earhook OWS Earphones Instructions

July 31, 2024
DiSNEY

INSTRUCTIONS

FOR USE

DN19

Shiny Open Wireless
Stereo

Product Structure Diagram

Disney DN19 Earhook OWS Earphones

  1. magnetic suction groove
  2. charging compartment interface
  3. Charging compartment digital screen
  4. headphone charging contact
  5. function key (touch)
  6. headphone indicator light
Packing List

Headphones x 2 pcs
Charging compartment x 1 pcs
Type-C charging line x 1 pcs
Instruction x 1 pcs

Introduction of product operation

Function Operation Indicator Voice Assistant
Pairing name DN09
Power on Out of the power bank, the headset will turn on automatically;
Or, Press the key for 4 seconds to turn it on  White indicator flashes 3
second Power on
Power off After the headset is put into the power bank, it will turn off

automatically;
Or, Press the key for 6 seconds to turn it off| Red indicator flashes 2 second| Power off
Pairing| The headphones automatically will start pairing after power on| After pairing, the Red and white indicators of the master headset flash alternately, the slave headset turn off| Du
Connect to phone| After pairing, it will automatically enter the standby state. Check the Bluetooth list of the smart device to search and click “DN19” to connect. After the headset is successfully connected, there will be a voice assistant and the indicator will turn off. | Indicators turn off| Connected
Mode| When the mobile phone is connected, click the right key 4 times to switch the mode.
Factory default is music mode| When connected, the White indicator flashes slowly in game mode. In music mode, the indicator turns off.| MUSIC MODE/GAME MODE
Play/Pause| Double-click the key when connected| /| /
Previous| In music mode, click the right headset key three times| /| /
Next| In music mode, click the left headset key three times.| /| /
Volume up| In connecting, click the right headset key| /| Maximum volume
Volume down| In connecting, click the left headset key| /| /
Voice Assistant| In connecting, press the left headset key for 2 seconds to wake up the voice assistant| /| Beep
Connect Phone Call| Double-click any headset key when there is an incoming call| /| Phone rings
Reject| Press any headset key for 2 seconds when there is an incoming call  | /| Beep
Hung up| Double-click the headset key after a phone call| /| /
Low Battery| When the voltage is lower than 3.3V, there will be a voice warning until the headset is turned off| Red indicator flashes in 6 seconds.| The battery in low
Disconnect| It the range is exceeded or is manually operated, the Bluetooth will be disconnected| The master headset indicator flashes in Red and white, the slave headset turns off| Disconnected
Auto connection| After power on or disconnection, the headset will automatically connect to the last device within a valid distance| Indicator turn off| Connected
Restore to factory setting| In any case, click the left key 5 times to enter the pairing mode with voice assistant;
If There is no voice assistant, press again
(this function is used to clear the pairing information)| The indicator of the left and right earphones flash alternately in Red and white. After the connection is successful, the slave headset indicator turn off.| Pairing
Charging| Put the headset into the power bank, it will power off and start charging automatically  | The white indicator of the headset is always on, and the light is off when the headset is fully charged | /
Low power bank| When the power bank is in low voltage, The digital display screen of the charging compartment will prompt.
Power bank charging| When the cable is used to charge the power bank, The digital display screen of the charging compartment continuously prompts the battery level number.
Charging finished| After the power bank is fully charged, The digital display screen of the charging compartment displays 100%.
Note: when the Bluetooth headphones are connected to a smart device, and the Game Mode is switched, the service time and connection distance of the headphones will be shortened

Headset Parameters

  1. Bluetooth version: Bluetooth 5.3
  2. Support agreement: A2DP/HFP/HSP/AVRCP
  3. Bluetooth transmission distance: 10m
  4. Carrier frequency: 2.402 GHz ~ 2.480 GHz
  5. Frequency response range: 20Hz ~20KHz
  6. Horn size: Φ 16mm
  7. Horn impedance: 23 Ω ±15%
  8. Horn rating: 5mW
  9. Headphone battery capacity: 3.7 V/50mAh (polymer battery)
  10. Battery capacity of charging compartment: 3.7 V/300mAh (polymer battery)
  11. Charging interface: USB Type-C
  12. Cruise duration: ≈ 7 hours
  13. Single charge period of earphone: ≈ 1.5 hours
  14. Charging time of charging bin: ≈ 1. 5 hours
  15. Charging times of headphones in charging compartment: 3 times
  16. Shutdown standby time: ≈ 3600 hours
Simple Troubleshooting

Malfunction

| Factor| Solution
---|---|---

Cannot be turned on

| Headphones are low in power| Charge the earphone

Headphones flashing red light

| Headphones are low in power| Charge the earphone

Charging without prompt

| The headphones are not put away| Adjust the position of headphones

Automatic shutdown

| Headphones are low in power| Charge the earphone

Headphones have echo

| The volume is too loud or the environment is too noisy| Adjust the volume or change the environment

A murmur in headphones

| Serious external interference or too far away from the mobile phone| Change location or close to mobile phone

Calling party voice is low

| Headphones are incorrectly worn or the volume is too low| Adjust the earphone wearing or volume

Intermittent signal

| Serious external interference or too far away from the mobile phone| Choose a non-interference environment or close to the mobile phone

Safety Guidelines

  1. Please fully charge this product before using it for the first time.
  2. Because the item is not a toy, children under the age of 12 must use it with adult supervision.
  3. Please use 5V/1A charger that has passed the safety certification of regular manufacturers to avoid damage to products caused by fast charging chargers that support high voltage.
  4. Please charge in a safe environment. Please remove the charging cord from the charging compartment as soon as possible once the charge is complete to prevent battery damage from prolonged charging. The charging mode of the charging bin is Type-C interface.
  5. This product has built-in non-detachable rechargeable battery. Repeated charging and discharging of headphones will lead to battery performance degradation over time, which is a normal phenomenon for all rechargeable batteries.
  6. This product is equipped with lithium battery. Charge it at least once a month if it hasn’t been used for a while.
  7. Please stop using it and see a doctor if you experience skin irritation while wearing it owing to individual variances.
  8. When using this product with Bluetooth connection, please adjust the earphone sound to the appropriate volume, to avoid hearing damage caused by long-term high volume.
  9. If you use this device while engaged in activities that call for attention, such as driving or cycling, on roads, at construction sites, on trains, or while walking, you should be mindful of your own and other’s safety. To ensure that you can hear the sounds around you, including alarms and warning signs, you should take off your headphones or increase the volume.
  10. Please comply with the relevant regulations of your region or country, and use this product as required when driving.
  11. This product contains magnetic materials. When using or placing the product, please keep away from electrical appliances with strong magnetic field or strong electric field, such as microwave oven, refrigerator, etc.
  12. It is recommended to use this product in the environment with temperature of -0 C~ 45 C. When the ambient temperature is lower than -5 C, the battery performance will be limited.
  13. Do not use this product in places where the use of wireless devices is expressly prohibited, otherwise it will interfere with other electronic devices or cause other dangers.
  14. Before approaching medical and industrial equipment or boarding an airplane, please consult local staff for use of the product.
  15. Before cleaning and maintaining this product, please stop using this product, close all applications, and disconnect all connections or cables with other equipment.
  16. Please dispose of waste electronic products correctly according to local laws and regulations, and do not discard electronic and electrical equipment, components, batteries and other domestic garbage together.
Warning

  1. Please follow the contents of this manual to avoid damage to the product dueo wrong operation.
  2. Keep this product away from children, fire sources, heat sources, freezing sources, water sources and chemicals.
  3. Please avoid listening to music at a loud volume for extended periods of time to avoid damaging your hearing.
  4. Products and accessories should not be submerged in liquid or rinsed with water since this increases the risk of fire or electric shock.
  5. Do not place the product in the sun or in a place with high temperature. High temperature can shorten the service life of electronic components, damage batteries and deform some plastic parts.
  6. Please do not store this item in a dusty location where the temperature and humidity are excessively high or low.
  7. Please do not put magnetic stripe cards (such as bank cards, bus cards, etc.) into contact with this product for a long period, otherwise the magnetic stripe cards may be damaged by magnetic field.
  8. Do not put great pressure on this product, or disassemble, beat or shake this product to prevent the product from being damaged.
  9. Do not operate this product near heat sources, such as radiators, hot air regulators, stoves or other heat-generating instruments.
  10. Please do not block the opening of this product, such as charging port, indicator light, microphone, etc.
  11. Please do not use this equipment in severe downpours as they may lead to equipment failure and enhance the danger of electric shock.
  12. If you use this product during intense exercise or sweating, prevent liquid from penetrating into the inside of the product to damage the product.
  13. The product belongs to built-in polymer lithium battery, which cannot be replaced. Please do not discard or put it in fire to avoid explosion, fire and other dangers.
  14. Consumers shall bear all the consequences of personal and property damage caused by improper use of the product in violation of the above warnings, and the Company will not bear any legal liability for this.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals