DISNEY 75023 Frozen 2 Interactive Olaf User Manual
- May 15, 2024
- DiSNEY
Table of Contents
DISNEY 75023 Frozen 2 Interactive Olaf
Product Information
Specifications:
- Product Name: Olaf Interactive Toy
- Model Number: OIT-2021
- Manufacturer: Arendelle Innovations
- Recommended Age: 3 years and above
- Power Source: 3 AAA batteries (not included)
- Features: Interactive responses, voice recognition, fun facts, birthday greetings
Product Usage Instructions
- Power On/Off: Switch the toy on by pressing the power button located on Olaf’s back.
- Interaction: Speak clearly to Olaf to engage in conversations. Ask questions or make statements to trigger responses.
- Birthday Mode: Activate birthday mode by saying “It’s my birthday!” to receive special greetings from Olaf.
- Fun Facts: Ask Olaf for a fun fact to hear interesting tidbits.
- Outfit Evaluation: Inquire about your outfit by asking Olaf for his opinion.
Frequently Asked Questions
Q: How do I change the batteries?
A: To replace the batteries, unscrew the battery compartment located on Olaf’s back, remove the old batteries, and insert new AAA batteries following the correct polarity.
Q: Can Olaf recognize multiple voices?
A: Olaf is designed to respond to a variety of voices but works best with clear and distinct speech patterns.
Q: Is Olaf waterproof?
A: No, Olaf is not waterproof. Keep him away from water to prevent damage to the electronic components.
TRY ME MODE | ACTIVATE RANDOM PHRASES
- Slide switch to ” l ” on the back of Olaf.
- Press the middle button to activate random phrases.
RF MODE | TALK TO OTHER OLAF’S
- Slide switch to “ ” on the back of Olaf.
- Press middle button
- If another Olaf is nearby, RF mode will be activated and both will communicate with each other.
INTERACTIVE MODE | TALK TO OLAF
- Slide switch to “ ” on the back of Olaf.
- Wait for Olaf to wake up, blink, and enter Standby Mode.
- Say the Initial Phrase to talk to Olaf… Hey Olaf!
- Olaf will respond back, look around and blink. Olaf is ready to interact. Now you can say these Questions & Phrases for a unique Olaf response!
- If Olaf does not hear you after 30 seconds, Olaf will go back to Standby Mode, and will need to first be asked an Initial Question again. Go back to step 3.
- To turn Olaf off, slide switch on back to “O” position at any time.
NOTE: if left in the” ” position, Olaf will continue to try to get your attention periodically, but will turn off after 5 minutes of no interaction. Press middle button for Olaf to wake up.
SHOULDER PLACEMENT
- Place shoulder connector underneath shirt on left or right shoulder with the arrow facing forward.
- Adjust the customizable connector to fit shoulder size and shape.
- Sit Olaf on the shoulder so the connection area matches the forward seated position.
BATTERY REPLACEMENT
- Remove the screws to access the battery compartments.
- Open battery door.
- Exhausted batteries are to be removed.
- New batteries are to inserted with correct polarity.
- Replace the battery door and secure with screw.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio / TV technician for help.
This device complies with FCC’s radiation exposure limits set forth for an uncontrolled environment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>