Disney A11 Wireless Earbuds Instruction Manual

Disney A11 Wireless Earbuds

Product Information

Specifications

• Model: A11 Wireless Earbuds
• FCC ID : FCC15
• Bluetooth Version: 2S

Product Usage Instructions

On/Off
To turn the earbuds on/off, press and hold the function key for 3 seconds.

Bluetooth Connection
To connect via Bluetooth, enable Bluetooth on your device and select ‘A11 Wireless Earbuds’ from the available devices list.

Touch Function

• Pause/Play: Click the left or right function key.
• Next Track: Long press the right function key for 2 seconds.
• Previous Track: Long press the left function key for 2 seconds.
• Volume Up: Double-click the right function key.
• Volume Down: Double-click the left function key.
• Voice Assistant: Triple-click the left or right function keys.
• Answer/Hang Up: Click any function key.
• Reject a Call: Long press the left or right function key for 2 seconds.
• Cancel Dialing: Click any function key.

Charging
Connect the earbuds to a power source using the provided charging cable. Ensure proper connection for charging.

Matters Needing Attention

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help if needed.
• The device meets general RF exposure requirements and can be used in portable exposure conditions without restriction.

Frequently Asked Questions (FAQ)

• How do I reset the earbuds?
  To reset the earbuds, place them back in the charging case and remove them after 10 seconds. They will reset automatically.

• How do I check the battery level?
  The earbuds may have an indicator light that shows the battery level. Refer to the user manual for specific instructions on checking battery level.

• Can I use only one earbud at a time?
  Yes, you can use either the left or right earbud independently by pairing it with your device separately.

Product parameter

• Bluetooth version: V5.3+BR+EDR+BLE

• Support protocol: A2DP/AVDTP/AVRCP/ RFCOMM/HFP/HSP/SPP/HID

• Transmission distance: > 10m

• Audio coding: AAC, SBC

• Charging port: Type-C

• input voltage current: DC5V —0.2 A
  Current, output voltage: DC5V — 0.2 A

• Playback duration: single playback duration > 4 hours, use with charging case > 8 hours

• Call duration : > 3 hours

• Charging time : about 1 hour

• Power box charging : about 1.5 hours

Product operation instruction  On/off

• Open the charging case and take out the earphones, which will turn on automatically
• The earphone is off outside the box. Long press the function button for 2 seconds to turn it on
• Put it in the charging case and turn it off
• When the device is powered on, hold down for 5S to power off
• Disconnected devices automatically s hut down after 3 minutes

Bluetooth connection

• Turn on your device’s Bluetooth, search for “A11” and elect Connect
• When the device is powered on for the first time, it automatically enters the Bluetooth pairing state
• When the device is turned on again, the headset will automatically connect back to the last device. If the connection fails, the headset will automatically enter the pairing mode

Touch function

• Pause/Play Click the left and right function keys
• Next track Long press right function key 2 seconds
• Previous piece Long press left function key 2 seconds
• Volume up Double-click the right function key
• Volume down Double-click the left function key
• Voice assistant Triple-click the left/right function keys
• Answer/hang up Click any function
• Reject a call Long press left/right for 2 seconds
• Cancel dialing Click any function key

Charge

• When the Type-C data cable is inserted into the charging port for charging, The white indicator is flashing, and the fully charged indicator is long and bright
• When charging the headset, the white light on the charging case is long, When the headphone is charging, the white headphone light is always on, fully charged, and all lights are off.

Matters needing attention

• The earphone and charging bin are used for about a week. Clean the earphone and charging bin’s thimble with cotton swabs or rag to prevent dirt on the thimble and avoid bad charging contact
• When not in use, please put the earphones back in the charging case to prevent loss and timely charge the earphones.
• Before cleaning and maintenance, stop using the device, shut down all applications, and disconnect all connections or cables from other devices.
• Use a clean, dry, soft cloth to wipe the device or its accessories.
• If the product with lithium battery is not used for a long time, make sure to charge it at least once every three months
• Keep the device and its accessories dry. Do not use external heating devices such as microwave ovens or hair dryers to dry them.
• Do not place the device or its accessories in an area where the temperature is too high or too low. Otherwise, the device may fail, catch fire, or explode.
• Do not use strong chemicals, cleaning agents, or strong detergents to clean the equipment or its accessories.

FCC NOTE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>