SUNNY HEALTH AND FITNESS SF-RB4616 Smart Magnetic Resistance Recumbent Bike with Easy Adjustable Seat User Manual

SUNNY HEALTH AND FITNESS SF-RB4616 Smart Magnetic Resistance Recumbent

Bike with Easy Adjustable Seat

IMPORTANT SAFETY INFORMATION

We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions.

1. Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Your physician’s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you do experience any of these conditions, you should consult your physician before continuing with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear.
6. Always use the equipment as indicated. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noises coming from the equipment during exercise, discontinue use of the equipment immediately and do not use until the problem has been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 300lbs (135kgs).
10. The equipment is not suitable for therapeutic use.
11. To avoid bodily injury and/or damage to the product or property, proper lifting and moving are required.
12. Your product is intended for use in cool and dry conditions. You should avoid storage in extreme cold, hot or damp areas as this may lead to corrosion and other related problems.
13. This equipment is designed for indoor and home use only; it is not intended for commercial use.

PRE-ASSEMBLY CHECK LIST

Before you start to assemble, please make sure all parts are included.

HARDWARE PACKAGE

Ordering Replacement Parts (U.S. and Canadian Customers only)

Please provide the following information in order for us to accurately identify the part(s) needed:

• The model number (found on cover of manual)
• The product name (found on cover of manual)
• The part number found on the “EXPLODED DIAGRAM” (page 12) and “PARTS LIST” (page 13~14)
• Please contact us at support@sunnyhealthfitness.com or 1- 877 – 90SUNNY (877-907-8669).

ASSEMBLY INSTRUCTIONS

We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

STEP 1:

NOTE: The Front Stabilizer (No. 6F) is marked “FRONT” and the Rear Stabilizer (No. 6R) is marked “REAR”. Attach the Front & Rear Stabilizers (No. 6F & No. 6R) onto the Main Frame (No. 1) with 4 Cross Head Bolts (No. 58), 4 Arc Washers (No. 54), and 4 Cap Nuts (No. 53). Tighten with the Spanner (No. 66).

STEP 2:
Connect the Sensor Wire 2 (No. 70) with Sensor Wire 1 (No. 69).
CAUTION : Please make sure the Tension Control Knob (No. 23) is at the highest resistance level (level 8, all the way to the right) before you connect the Tension Wire (No. 38).

Connect Tension Control Wire (No. 23a) and Tension Wire (No. 38). Then, pull Tension Control Wire (No. 23a) upward and insert it into the slot of metal bracket on Tension Wire (No. 38). Make sure the metal fitting on Tension Control Wire (No. 23a) is secured in the metal bracket. Attach the Front Post (No. 2) onto the Main Frame (No. 1) using with 4 Hexagon Bolts (No. 59) and 4 Arc Washers (No. 54). Tighten and secure with the Allen Wrench (No. 67). We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

STEP 3:
Remove 4 Cross Head Screws (No. 51) from the back of the Computer (No. 24) using Allen Wrench (No. 67). Connect the Sensor Wire 2 (No. 70) and the Computer Wire (No. 24a). Then attach the Computer (No. 24) onto the bracket of the Front Post (No. 2) with 4 Cross Head Screws (No. 51) that were removed. Tighten and secure with Allen Wrench (No. 67).

STEP 4:

WARNING! Read instructions carefully as improper assembly may cause permanent damage to your bike.
Align the Left Pedal (No. 18) with the left side of the Crank (No. 10) at 90°. Turn the pedal bolt on Left Pedal (No. 18) counter-clockwise as tightly as you can with your hand. Then, use Spanner (No. 66) to tighten and secure. Align the Right Pedal (No. 19) with the right side of the Crank (No. 10) at 90°. Turn the pedal bolt on Right Pedal (No. 19) clockwise as tightly as you can with your hand. Then, use Spanner (No. 66) to tighten and secure.

Attach the Front Handlebar (No. 3) onto the Front Post (No. 2) with 2 Hexagon Bolts (No. 64). Tighten with Allen Wrench (No. 67). Then attach the Handlebar Cover (No. 22) onto Front Handlebar (No. 3). Plug the Pulse Wire (No. 71) to the jack on the back of the Computer (No. 24). We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

STEP 5: Attach the Slide Rail Assembly (No. 79) to the Main Frame (No. 1), using 4 Hexagon Bolts (No. 74) and 4 Flat Washer (No. 55) to secure and tighten with Allen Wrench (No. 67). Attach the Adjustable Handle (No. 76) to the Axle (No. 11) with 2 Hexagon Socket Bolts (No. 83). Tighten with Allen Wrench (No. 68).

STEP 6:
Attach the Seat (No. 30) onto the Seat Post (No. 4) with 4 Hexagon Bolts (No. 60) and 4 Flat Washers (No. 55). Tighten with Allen Wrench (No. 67). Attach the Rear Handlebar (No. 5) onto the Seat Post (No. 4) with 2 Flat Washers (No. 55), 1 Hexagon Bolt (No. 60), 1 Cross Head Bolt (No. 62) and 1 Lock Nut (No. 52). Tighten with the Spanner (No. 66) and the Allen Wrench (No. 67).

Attach the Back Cushion (No. 29) onto the Seat Post (No. 4) with 2 Flat Washers (No. 55) and 2 Hexagon Bolts (No. 61). Tighten with the Allen Wrench (No. 67).

MAINTENANCE & ADJUSTMENT GUIDE

CLEANING
The recumbent bike can be cleaned with a soft, clean, damp cloth. Do not use abrasives or solvents on plastic parts. Please wipe your perspiration off the recumbent bike after each use. Be careful not get excessive moisture on the computer display panel as this might cause electrical hazards or electronics to fail. Please keep the recumbent bike, especially the computer, out of direct sunlight to prevent screen damage. Please inspect all assembly bolts and pedals on the recumbent bike for proper tightness every week.

STORAGE
Store the recumbent bike in a clean and dry environment, away from children.

BATTERY INSTALLATION AND REPLACEMENT

BATTERY INSTALLATION:

1. Take out 2 AAA batteries from computer box.
2. Press the buckle of battery cover on the back of the Computer (No. 24), then remove battery cover.
3. Install 2 AAA batteries into the battery case on the back of the Computer (No. 24). Pay attention to the battery + and – ends before installing.
4. Press the buckle of battery cover, then put the battery cover back to the back of the Computer (No. 24).
   The installation is complete!

BATTERY REPLACEMENT:

1. Press the buckle of battery cover on the back of the Computer (No. 24), then remove battery cover.
2. Remove the 2 old AAA batteries in the battery case and install 2 new AAA batteries into the battery case on the back of the Computer (No. 24). Pay attention to the battery + and – ends before installing.
3. Press the buckle of battery cover, then put the battery cover back to the back of the Computer (No. 24).
   The replacement is complete!

BATTERY DISPOSAL
NOTE : Always change both batteries at the same time. Do not mix battery types and do not mix old and new batteries. Dispose batteries according to your state and regional guidelines.

EXERCISE COMPUTER

BLUETOOTH:

1. The Bluetooth icon will flash when the meter is on or wakes from sleep mode. If no Bluetooth connection is established within 3 minutes, the Bluetooth icon will turn off.
2. The Bluetooth icon will stay on when it is connected.

WIRELESS HEART RATE

1. The wireless heart rate icon will flash when the meter is on. If the heart rate monitor is not connected within 1 minute, the wireless heart rate icon will turn off.
2. After exercise resumes, the wireless heart rate icon will flash. If the heart rate monitor is not connected within 1 minute, the wireless heart rate icon will turn off.
3. When the meter wakes from sleep mode, the wireless heart rate icon will flash. If the heart rate monitor is not connected within 1 minute, the wireless heart rate icon will turn off.
4. The wireless heart rate icon will flash when the MODE key is pressed. If the heart rate monitor is not connected within 1 minute, the wireless heart rate icon will turn off.
5. The wireless heart rate icon will stay on when the heart rate monitor is connected.
   NOTE : The heart rate monitor is not included. Wireless heart rate function works with SunnyFit Heart Rate Monitor HR200. HR200 can only connect to the computer when the wireless heart rate icon is flashing.

KEY FUNTION:

• This key lets you to select and lock on to a particular function you want. SCAN→TIME→SPEED(SPD) →DISTANCE(DIST) →CALORIES(CAL)→TOTAL DIST(ODO) →RPM →PULSE
• Pressing and hold with 3 seconds to reset the value to zero (without ODO) when the Bluetooth is not connected.
• Press and hold the MODE key for 6 seconds to disconnect from both the SunnyFit APP and the heart rate monitor; then, the meter will enter sleep mode.

FUNCTION

• SCAN : Display changes according to the next diagram every 6 seconds. and the icon will be flash.
• TIME : The total working time with starting exercise.
• SPEED : The current speed with starting exercise.
• DISTANCE : The current distance with starting exercise.
• CALORIE : The current calorie burned with starting exercise.
• TOTAL DIST (ODO): Counts the total distance with from start to finish. If the battery is replaced, the value returns to zero.
• RPM : The average number of turns per minute of the wheel to measure the speed of the pedal.
• PULSE : The current pulse rate.

SLEEP MODE

• The meter will shut off automatically and disconnect the heart rate monitor if there is no activity for 4 minutes when the Bluetooth is not connected.
• The system turns on when the MODE key is depressed or a signal input from the sensor.

SPECIFICATIONS

FUNCTION

| SCAN| 6S
---|---|---
TIME| 00:00-999:59(M :S)
SPEED| 0.00~99.99KPH(MPH)
DIST| 0.00~9999.9KM(MILES)
ODO| 0.0~9999.9KM(MILE)
CAL| 0.0~9999.9KCAL
PULSE RATE| 40~240BPM
RPM| 0~240
BATTERY| SIZE-AAA, 2PCS
Operating temperature| 0~40℃(32℉-104℉)
Storage temperature| -10~60℃(14℉-140℉)

APP CONNECTION:

Connect Smart Equipment to SunnyFit App:

1. Scan to download SunnyFit from the app store:
2. Ensure that the Bluetooth function is turned on from your mobile device.
3. If this is your first time using the SunnyFit app, follow the in-app instructions to register for your free SunnyFit account and log in.
4. Begin any workout activity that matches your smart equipment, then follow the onscreen prompts to search for and connect to your smart equipment.
5. When connected, your stats and records will be displayed at the end of your course/session, and recorded in your account profile!

TROUBLESHOOTING

There is no display on the computer console.

| 1.    Remove the computer and verify that the wire from the computer is properly connected to the wire that comes from the front post.

2.    Check if the batteries are correctly positioned and battery springs are in proper contact with batteries.

3.    The batteries in the computer may be unresponsive. Change to

new batteries.

The recumbent bike

wobbles when in use.

| Turn the end caps on the rear stabilizer as needed to level the

recumbent bike.

The recumbent bike makes squeaking noise

when in use.

| The bolts may have become loose on the recumbent bike. Please inspect all the bolts and tighten any loose bolts.

NOTE:

1. If you are having trouble connecting your smart equipment, visit www.sunnyfit.com/guide or scan the QR code below:
2. If you require additional support, please contact support@sunnyfit.com.

EXPLODED DRAWING

PARTS LIST

87

| Self-Tapping Self-Drilling Screws| ****

ST4.2*16

| ****

5

88| Handle Fixing Plate| 5025T4| 1
89| Bearing| 6001| 4
90| Wave Shaped Pad| Φ16Φ12.20.3| 1
91| Fixed Seat| Φ725611| 2
92| Compression Spring| Φ12.6Φ0.939.7| 1
93| Hexagon Bolt| Φ7.9*45（M6）| 1

References

• SunnyFit | For Everyone

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>