HYCHIKA MS200W Orbital Sander Instruction Manual

HYCHIKA MS200W Orbital Sander

If any problems, please contact our after-sales email: support@hychika.com

APPLICATION
The orbital sander is used for sanding wood, plastic materials and metals. It is very important to use the correct sandpaper designed for the material to be worked on.

WARNING!  Read this manual and the general safety instructions carefully before using the machine, for your own safety. This electric tool should only be used in accordance with these instructions.

DESCRIPTION

1. Sanding disk
2. On/off switch
3. Dust extractor socket
4. Rubberized grip
5. Clamping
6. Aspirapolvere

NOTE ON THE PACKAGE

• Remove all materials from the packaging
• Remove the packaging materials and shipping support (if present)
• Verify the completeness of the package contents
• Keep the packaging materials away from children’s reach, as well as the spine and all accessories for transport
• Conserve the packaging materials until the end of the warranty period. Then dispose of them in the local waste disposal system

WARNING!  Packaging materials are not toys! Children are not authorized to play with plastic sheets or polystyrene foam!

**GENERAL WARNINGS ON THE SAFETY OF POWER TOOLS

**

Read all the safety warnings and all the instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Conserve these guidelines to refer to them in the future. The term “power tool” refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.

Work Area Safety

• Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

FAQ

How do I contact the after-sales support?

 You can contact after-sales support at [support@hychika.com](mailto:support@hychika.com)

Can the orbital sander be used on materials other than wood, plastic, and metal?

The orbital sander is designed for sanding wood, plastic materials, and metals. It’s important to use the correct sandpaper for the material.

What should I do if I find the package contents incomplete?

If the package contents are incomplete, contact after-sales support for assistance.

Is there any special disposal instructions for the packaging materials?

Keep packaging materials away from children and dispose of them in the local waste disposal system after the warranty period.

What safety precautions should I take when using the power tool?

Read all safety warnings and instructions in the manual to avoid risks such as electric shock, fire, and/or serious injury. Keep the work area clean, do not operate in explosive atmospheres, and prevent distractions.

Specifications

Please note, due to the complexity and length of the provided images, the above transcription covers only the initial sections. In a complete document, all sections would be transcribed with the same level of detail and structure, maintaining the integrity and accessibility of the information.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>