SUNNY Health and Fitness SF-B0891 Magnetic Under Desk Mini Bike Pedal Exerciser User Manual
- June 14, 2024
- Sunny Health and Fitness
Table of Contents
SUNNY Health and Fitness SF-B0891 Magnetic Under Desk Mini Bike Pedal
Exerciser User Manual
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907- 8669)
STEP 1:
Attach Rear Fixed Bottom Plate (No. 14) to the Main Frame (No. 1) with
3 Bolts (No. 15). Tighten and secure with Spanner **(No. 51).
STEP 2:**
Attach Front Stabilizer (No. 17) to the Main Frame (No. 1) with 2 Carriage
Bolts (No. 21), 2 Washers (No. 22), and 2 High Cap Nuts (No. 27). Tighten and
secure with Spanner (No. 51).
STEP 3:
NOTE : The Pedals (No. 7L & No. 7R) are marked “L” and “R” for Left and
Right. WARNING! Read instructions carefully as improper assembly may cause
permanent damage to your bike.
NOTE: Left Nylon Nut (No. 50L) is blue on the inside and Right Nylon Nut (No. 50R) is white onthe inside.
Remove the 2 Left & Right Nylon Nuts (No. 50L & No. 50R) located on the Pedals (No. 7L & No. 7R).
Align the Left Pedal (No. 7L) with the Left Crank (No. 3L) at 90°. Gently insert the Left Pedal (No. 7L) into the Left Crank (No. 3L) andturn the Left Pedal (No. 7L) counter-clockwiseas tightly as you can with your hand. Use Spanner (No. 51) to tighten and secure.
Turn the Left Nylon Nut (No. 50L) clockwise as tightly as you can with your hand. Use Spanner (No. 51) to hold the pedal bolt on the Left Pedal (No. 7L) and use Spanner (No. 52) to turn the Left Nylon Nut (No. 50L) clockwise at the same time, until it is tightened on to the Left Crank (No.3L).
Align the Right Pedal (No. 7R) with the Right Crank (No. 3R) at 90°. Gently insert the Right Pedal (No. 7R) into the Right Crank (No. 3R) and turn the Right Pedal (No. 7R) clockwise as tightly as you can with your hand. Use Spanner (No. 51) to tighten and secure.
Turn the Right Nylon Nut (No. 50R) counterclockwise as tightly as you can with your hand. Use Spanner (No. 51) to hold the pedal bolt on the Right Pedal (No. 7R) and use Spanner (No. 52) to turn the Right Nylon Nut (No. 50R) counter- clockwise at the same time, until it is tightened on to the Right Crank (No. 3R).
The assembly is complete
EXERCISE METER
SPECIFICATIONS:
SPEED—————————————–0.0~999.9 MPH (Mile/Hour)
TIME ——————————————–0:00~99:59 MIN
DIST (DISTANCE) ————————–0.0~9999 M (Mile)
CAL (CALORIES)- ————————–0.0~9999 KCAL
FUNCTION KEYS:
MODE: Press the red key repeatedly to select the desired value (TIME, SPEED, DISTANCE, CALORIES, SCAN). Hold the key for 4 seconds to have all function values reset (total reset).
FUNCTIONS:
SPEED: Displays current speed.
TIME: Counts the total time of the exercise from start to finish.
DIST (DISTANCE): Counts the distance of the exercise from start to
finish.
CAL (CALORIES): Counts the total calories burned during an exercise from
start to finish.
SCAN: Displays functions automatically in the following order: TIME,
CALORIES, and DISTANCE.
NOTE:
- Please use 1pc of BUTTON CELL LR44 1.5V battery as a power supply. If there is an abnormal display on the meter, please replace the battery.
- The meter will automatically power on when pedals are in motion or the MODE key is being pressed.
- The meter will automatically start calculating when exercise begins.
- All functions will automatically stop calculating with a “STOP” sign on the upper left corner of the meter when there is no movement for about 4 seconds; “STOP” sign will be off and the meter will automatically start calculating as soon as the machine is in motion.
- The meter will automatically shut off if there is no movement for 4 to 5 minutes
ADJUSTMENTS & USAGE GUIDE
ADJUSTING THE TENSION
Adjust the tension by rotating the Tension Control Knob (No. 9) clockwise to
increase the level of resistance. Rotate the Tension Control Knob (No. 9
)counter-clockwise to decrease the level of resistance.
Tension levels are set at Level 1 being the lowest and Level 8 being the
highest
WARNING
The machine is intended to use in a sitting position only, do not stand on the
machine.
Failure to follow all warnings and instructions could result in serious injury
or death.
USE ONLY WHILE SITTING. DO NOT STAND ON THE MACHINE
IMPORTANT NOTE:
Please remove the plastic tab from the meter before use!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>