Veister S814 Portable Wireless Speaker User Manual
- June 15, 2024
- Veister
Table of Contents
Veister S814 Portable Wireless Speaker
Specification
- Bluetooth version: 5.2
- Transmission distance: 10m
- Frequency response: 20Hz-20KHz
- Operating Voltage: 3.7V
- Weight: 500g
- Speaker: 452mmX2
- SNR: 285dB
- Distortion: < 1%
- Input voltage: DC5V
- Dimension: 7575185mm
Power ON/OFF
Mode switching
Bluetooth Mode
TF Car/USB Mode
Insert the TF card or U disk and hear the prompt tone “MUSIC MODE” to play the
songs in the TF card.
AUX Mode
Connect with the audio cable, it will switch to aux mode after hearing the
warning tone ” Line in Mode”
FM mode
Bluetooth Phone Call
Charger
- Appearance of prompt voice “Low Battery Please Charge”, Needs to be recharged.
- When charged, the red light is on, and when charged, the red light is off.
- Different adapters, interfaces, and charging times will be different.
Notice
- Do not throw this product into fire or water.
- Do not modify, repair, or dissemble the speaker.
- Do not make contact with combustible materials directly.
- Please keep the device away from damp and dusty environments.
- Before charging please check whether the charger model is suitable for this product.
- Do not use the Bluetooth function while charging.
- The device will automatically lose power when it’s on standby, it’s recommended to charge the speaker once a month.
FCC warning statements
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements.
TWS Connect
- When both machines are turned on and the distance is within 10m, press the M button of any machine to connect. After the first connection is successful and the subsequent connection will be automatic.
- Please keep your speaker and mobile phone within 10m working range.
- If over this distance, a decline in sound quality and disconnection will occur.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>