cudy X6 AX1800 Dual Band Gigabit Wi-Fi 6 Mesh Router Installation Guide
- July 30, 2024
- cudy
Table of Contents
Quick Installation Guide
X6 AX1800 Dual Band Gigabit Wi-Fi 6 Mesh Router
If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL/Cable/Satellite modem, connect the Ethernet cable to the router’s WAN port, and skip steps 1, 2 ,3.
-
Turn off the modem and remove the battery if it has one.
-
Connect router’s INTERNET Port to DSL/Cable Modem/Ethernet.
-
Turn on the modem and wait about 2 minutes for it to restart.
-
Connect the power adapter to the router, and wait 1 minute until the system LED changes from flashing to solid on (red or blue) , which means that the system startup is completed.
-
Connect your computer to the router (Wired or Wireless)
Wired
Turn off the Wi-Fi on your computer and connect it to router’s LAN port via an Ethernet cable.
Wireless
Connect your device to the router’s Wi-Fi using the SSID (network name) and Password printed on the bottom of the router. -
Launch a web browser and enter http://cudy.net/ or http://192.168.10.1/ in the address bar. Use admin for password to log in.
-
Then below popup will appear, please follow step by step instructions to set up the internet connections.
Note: If the pop-up window does not appear, please click Quick Setup on
the status page.
Enjoy the internet!
LED and Button
| Name | Status | Indication |
|---|
System
LED| Solid On| Red| Internet is not connected
Blue| Internet is connected
Flashing| Red| System is starting up
Blue| WPS is in progress
Red-Purple-Blue| Software upgrading
Off| Power adapter is not connected to the device.
Ethernet
LED| On| The corresponding Ethernet port is connected.
Off| The corresponding Ethernet port is not connected.
Button| WPS| Press and hold 1 second to enable the WPS function.
Reset| Press and hold 6 seconds to reset the router to its
factory default settings.
Support
For technical support the user guide and more information, please visit:
http://www.cudy.com/support
support@cudy.com
EU Declaration of Conformity
English:
Cudy hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC and 2011/65/EU.
The original EU declaration of conformity can be found at
http://www.cudy.com/ce.
WEEE
According to the EU Directive on Waste Electrical and Electronic Equipment
(WEEE – 2012/19 / EU), this product must not be disposed of as normal
household waste.
Instead, they should be returned to the place of purchase or taken to a public
collection point for recyclable waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more information, please contact your
local authority or the nearest collection point. Improper disposal of this
type of waste may result in penalties according to national regulations.
FCC Statements:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
GNU General Public License Notice
The software code in this product was created by third parties and is licensed
under the GNU General Public License (“GPL”). If applicable, Cudy (“Cudy” in
this context refers to the Cudy entity offering respective software for
download or being in charge of the distribution of products that contain
respective code) makes the corresponding GPL source code available upon
request via the official website, either independently or with the assistance
of third parties (such as Shenzhen Cudy Technology Co., Ltd.).
For GPL-related questions, email support@cudy.com.
In addition, Cudy offers a GPL-Code-Centre under
https://www.cudy.com/gplcodecenterdownload where users can get the GPL
source codes used in Cudy products for free. Please note,that the GPL-Code-
Centre is only provided as a courtesy to Cudy’s customers but may neither
offer a full set of source codes used in all products nor always provide the
latest or actual version of such source codes. The GPL code used in this
product is subject to the copyrights of one or more authors and is supplied
WITHOUT ANY WARRANTY.
NEED TECH HELP?
Website:
www.cudy.com
Email:
support@cudy.com
Driver & Manual:
www.cudy.com/download
Support
For technical support, the user guide and more information, please visit:
https://www.cudy.com/support
810600155
References
- Cudy, Your Home and Business Networking Solutions Provider
- Download Search – Cudy
- Download Search – Cudy
- Download Search – Cudy
- Contact Us – Cudy