cudy AP3000 2.5G Wi-Fi 6 Access Point Installation Guide
- July 31, 2024
- cudy
Table of Contents
Quick Installation Guide
AP3000 2.5G Wi-Fi 6 Access Point
NEED TECH HELP?
www.cudy.com/qr_vg_ap
www.cudy.com
support@cudy.com
www.cudy.com/download
Power the device
Method A – DC Adapter.
Method B – PoE Adapter
Method C – PoE Switch
Configure the AP
Method A – Configure with an AP Controller (Or a Cudy Mesh device): Connect AP
to your Cudy Controller/Mesh Device (optionally via the Switch or PoE
Adapter). Wait for the LED on the AP to turn blue and the AP is connected to
the Internet. By default, the Wi-Fi name and password will be the same as the
main device,
Note : If the AP was configured before, press and hold the “Reset” button
for 2s to enable device adoption.
Method B – Without an AP Controller: Connect the AP to an internet source
device (modem/router/wall outlet), or place it near a known Wi-Fi network.
Connect your device to the AP’s Wi-Fi using the network name and Password
printed on the bottom of the router.
Follow the illustrations to configure the AP.
LED| Off|
---|---|---
Red|
Blue|
Flashing blue|
Yellow|
Flashing yellow|
Red, blue, and yellow alternate|
References
- Cudy, Your Home and Business Networking Solutions Provider
- Download Search – Cudy
- Download Search – Cudy
- YouTube
- Download Search – Cudy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>