CYP AVX-105C-TX HDMI AV over CAT Transmitter Receiver Instruction Manual
- July 30, 2024
- CYP
Table of Contents
AVX-105C-TX
UHD+ USB-C over Copper Transmitter with PoE
OPERATION MANUAL
AVX-105C-TX HDMI AV over CAT Transmitter Receiver
DISCLAIMERS
The information in this manual has been carefully checked and is believed to
be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of
patents or other rights of third parties which may result from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to update or
to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document and/or
product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored
in a retrieval system, or any of its part translated into any language or
computer file, in any form or by any means—electronic, mechanical, magnetic,
optical, chemical, manual, or otherwise—without express written permission and
consent from CYP (UK) Ltd.
© Copyright 2020 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be trademarks of
the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply. Please keep the
following in mind as you unpack and install this equipment:
- Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
- To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
- Never spill liquid of any kind on or into this product.
- Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
- Do not attach the power supply cabling to building surfaces.
- Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
- Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.
- To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.
- Please completely disconnect the power when the unit is not in use to avoid wasting electricity.
VERSION HISTORY
| REV. | DATE | SUMMARY OF CHANGE |
|---|---|---|
| RDV1 | 2022/12/29 | Preliminary release |
INTRODUCTION
This 4K UHD+ USB-C over Copper Transmitter and Receiver is designed for high- quality AV extension with minimum latency. By using a sophisticated ultra- light compression scheme (lossless for most content) it’s a great solution for extending 4K@60Hz (4:4:4) audio/video streams. Advanced video content such as HDR (High Dynamic Range), 10-bit color and multi-channel HD Bitstream audio can be easily transmitted. The use of 10 Gigabit Ethernet allows for extension distances of up to 100m when using Cat.6A/7. Additionally, this unit’s compact form factor, and its PoE functionality, which can extend power to the receiver, makes it ideal for installation in tight spaces, or inclusion in AV travel kits.
APPLICATIONS
- High quality, low latency, video extension
- Household entertainment
- Lecture halls, meeting rooms, and classrooms
- Point-to-Point secure video conferencing
PACKAGE CONTENTS
- 1× UHD+ USB-C over Copper Transmitter with PoE
- 1× UHD+ HDMI over Copper Receiver
- 1× 48V/0.83A DC Power Adapter
- 1× USB-C Cable (2m)
- 1× Operation Manual
SYSTEM REQUIREMENTS
- USB-C source equipment such as a laptop, PC, set-top box, or media player
- Compatible copper-based receiver is required
- The use of USB-C Gen2 cables, and industry standard Cat.6A, or Cat.7 Ethernet cable is highly recommended
FEATURES
- HDMI 2.0 (via USB-C) compatible
- HDCP 2.2 and HDCP 1.x compliant
- 1x USB-C input, 1x 10GbE output (Transmitter)
- 1x 10GbE input, 1x HDMI output (Receiver)
- Ultra-light compression, lossless for most content
- Extension up to 100m when using at.6A/7
- Supports up to 4K UHD+ (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input and output
- Supports pass-through of 10/12-bit HDR sources
- Supports pass-through of audio formats including LPCM (up to 8 channels), Bitstream and HD Bitstream
- Simple, hassle free, point-to-point connection
- Supports PoE which can extend power from the transmitter to the receiver. (Compatible receivers only)
OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
-
Power LED: This LED will illuminate to indicate the unit is on and receiving power.
Note: This LED will blink during the firmware update process. -
SYS LED: This LED will illuminate to indicate that the system is stable and ready to process audio/video streams.
Note: This LED will blink during the firmware update process. -
VIDEO LED: This LED will illuminate to indicate that the video source is stable, and streaming is in process.
-
Reset Pinhole: Press this button to reset the video connection between the transmitter and receiver.
-
CAT6A/7 Port: Connect directly to a compatible receiver for audio and video extension. Power via PoE can also be supplied over this port when connected to a compatible receiver.
Note: The PoE function is designed for extending power to compatible receiver units only. Non-PoE receivers will need their own power supply. Receivers from other brands may not be compatible.
6.2 Rear Panel
-
USB-C IN Port: Connect to USB-C source equipment such as a laptop, PC, set-top box, or media player.
Note: The unit can optionally be powered directly via this port. -
DC 48V Port: Plug the 48V DC power adapter into this port and connect it to an AC wall outlet for power. (Optional, if powered via USB-C.)
Note: PoE functionality is only available when powered via 48V DC.
6.3 Receiver Front Panel
-
Power ( ) LED: This LED will illuminate to indicate the unit is on and receiving power.
Note: This LED will blink during the firmware update process. -
System ( ) LED: This LED will illuminate to indicate that the system is stable and ready to process audio/video streams.
Note: This LED will blink during the firmware update process. -
VIDEO LED: This LED will illuminate to indicate that the video source is stable, and streaming is in process.
-
HDMI OUT Port: Connect to an HDMI TV, monitor, or amplifier for digital video and audio output.
-
CAT6A/7 Port: Connect directly to a compatible transmitter for audio and video extension.
6.4 Receiver Rear Panel
- SERVICE (USB Mini-B) Port: This port is for firmware update only.
- DC 5V Port: Plug the 5V DC power adapter into this port and connect it to an AC wall outlet for power.
CONNECTION DIAGRAM
SPECIFICATIONS
8.1 Technical Specifications
| USB-C Bandwidth | 21.6 Gbps |
|---|---|
| Ethernet Bandwidth | 10 Gbps |
| Input Ports | [TX] 1×USB (Type-C) |
[RX] 1×10GbE (RJ-45)
Output Ports| [TX] 1×10GbE (RJ-45)
[RX] 1×HDMI (Type-A)
Power Supply| 48V/0.83A DC
(US/EU standards, CE/FCC/UL certified)
ESD Protection (HBM)| ±8kV (Air Discharge)
±4kV (Contact Discharge)
TX Dimensions (W×H×D)| 60mm×24.75mm×95mm [Case Only] 60mm×26mm×96mm [All
Inclusive]
rX Dimensions (W×H×D)| 57mm×20.6mm×87mm [Case Only] 60mm×20.6mm×87mm [All
Inclusive]
Weight| [TX] 159g, [RX] 139g
Chassis Material| Metal (Steel)
Chassis Color| Black
Operating Temperature| 0˚C – 50˚C/32˚F – 122˚F
Storage Temperature| -20˚C – 60˚C/-4˚F – 140˚F
Relative Humidity| 20 – 90% RH (Non-condensing)
Power Consumption| [TX] 8W, [RX] 4.51W
8.2 Video Specifications
| Supported Resolutions (Hz) | Input | Output |
|---|---|---|
| USB-C | 10GbE | |
| 720×400p@70/85 | | 
640×480p@60/72/75/85| 
| 
720×480i@60| 
|
720×480p@60| |
720×576i@50| |
720×576p@50| |
800×600p@56/60/72/75/85| |
848×480p@60| |
1024×768p@60/70/75/85| |
1152×864p@75| |
1280×720p@50/60| |
1280×768p@60/75/85| |
1280×800p@60/75/85| |
1280×960p@60/85||
1280×1024p@60/75/85| |
1360×768p@60||
1366×768p@60||
1400×1050p@60||
1440×900p@60/75||
1600×900p@60RB||
1600×1200p@60||
1680×1050p@60||
1920×1080i@50/60||
1920×1080p@24/25/30| |
1920×1080p@50/60||
1920×1200p@60RB||
2560×1440p@60RB||
2560×1600p@60RB||
2048×1080p@24/25/30| |
2048×1080p@50/60||
3840×2160p@24/25/30| |
3840×2160p@50/60 (4:2:0)||
3840×2160p@24, HDR10||
3840×2160p@50/60 (4:2:0), HDR10|
|
3840×2160p@50/60||
4096×2160p@24/25/30| |
4096×2160p@50/60 (4:2:0)||
4096×2160p@24, HDR10||
4096×2160p@50/60 (4:2:0), HDR10||
4096×2160p@50/60||
8.3 Audio Specifications
8.3.1 Digital Audio
USB-C Input/Output / 10GbE Output/Input
LPCM
Max Channels| 8 Channels
Sampling Rate (kHz)| 32~192
Bitstream
Supported Formats| Standard & High-Definition
8.4 Cable Specifications
Cable Length| HD| FHD| 4K
UHD| 4K
UHD+| 8K
UHD
---|---|---|---|---|---
USB-C Cable
USB-C Input| 2m| 1m|
Ethernet Cable
Cat.6A/7| 100m|
Cable Length| 1080p| 4K30| 4K60
---|---|---|---
8-bit| 12-bit| (4:4:4)
8-bit| (4:4:4)
8-bit
High Speed HDMI Cable
HDMI Input| 15m| 10m| 5m| 3m
Bandwidth Category Examples:
-
HD Video
– 720p@60Hz
– HDMI transmission rates lower than 3Gbps
– HD-SDI (SMPTE 292M, 1.485Gbps) -
FHD Video
– 1080p@60Hz
– HDMI transmission rates between 3Gbps and 5.3Gbps
– 3G-SDI (SMPTE 424M, 2.970Gbps) -
4K UHD Video
– 4K@24/25/30Hz (8-bit color) & 4K@50/60Hz (4:2:0, 8-bit color)
– HDMI transmission rates between 5.3Gbps and 10.2Gbps
– 6G-SDI (SMPTE ST 2081, 6Gbps) -
4K UHD+ Video
– 1080p@120Hz (10/12-bit HDR)
– 4K@50/60Hz (4:4:4, 8-bit) & 4K@50/60Hz (4:2:0, 10/12-bit HDR)
– HDMI transmission rates between 10.2Gbps and 18Gbps
– 12G-SDI (SMPTE ST 2082, 12Gbps) -
8K UHD Video
– 4K@120Hz (10/12-bit HDR)
– 8K@24/25/30Hz (10/12-bit HDR) & 8K@50/60Hz (4:2:0, 8-bit color)
– HDMI transmission rates between 18Gbps and 48Gbps
– 24G-SDI (SMPTE ST 2083, 24Gbps)
ACRONYMS
| ACRONYM | COMPLETE TERM |
|---|---|
| 10GbE | 10 Gigabit Ethernet |
| 4K UHD | 4K Ultra-High-Definition (10.2Gbps max) |
| 4K UHD+ | 4K Ultra-High-Definition (18Gbps max) |
| 8K UHD | 8K Ultra-High-Definition (48Gbps max, without DSC) |
| 8K UHD+ | 8K Ultra-High-Definition (48Gbps max, with DSC) |
| AVoIP | Audio/Video over IP |
| Cat.5e | Enhanced Category 5 cable |
| Cat.6 | Category 6 cable |
| Cat.6A | Augmented Category 6 cable |
| Cat.7 | Category 7 cable |
| GbE | Gigabit Ethernet |
| Gbps | Gigabits per second |
| HDCP | High-bandwidth Digital Content Protection |
| HDMI | High-Definition Multimedia Interface |
| HDR | High Dynamic Range |
| IP | Internet Protocol |
| LED | Light-Emitting Diode |
| LPCM | Linear Pulse-Code Modulation |
| MHz | Megahertz |
| PoE | Power over Ethernet |
| PSE | Power Sourcing Equipment |
| SDI | Serial Digital Interface |
| SFP | Small Form-factor Pluggable transceiver |
| TCP | Transmission Control Protocol |
| USB | Universal Serial Bus |
| VoIP | Video over IP |
CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton,
Middlesex, TW17 8BA
Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279
Email: sales@cypeurope.com
www.cypeurope.com
v1.00
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>