CYP PUV-C3050TX-UA UHD+ USB-C Over HDBaseT Transmitter Instruction Manual

PUV-C3050TX-UA
UHD + USB-C over HDBaseT Transmitter
with USB KVM
OPERATION MANUAL

PUV-C3050TX-UA UHD+ USB-C Over HDBaseT Transmitter

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI licensing Administrator, Inc.

DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document and/or product at any time and without notice.

COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means—electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—without express written permission and consent from CYP (UK) Ltd.
© Copyright 2024 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in use to avoid wasting electricity.

VERSION HISTORY

INTRODUCTION

This 4K UHD+ USB-C over HDBaseT transmitter uses HDBaseT 3.0, the newest generation of HDBaseT technology, and is the perfect solution for extending full bandwidth (18Gbps, 4K@60Hz 4:4:4) video signals with HD audio via a single run of Cat.6A/7 cable over distances of up to 40 meters.
Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, and USB 3.0. Additionally, the inclusion of a USB-C connection as its input allows for the combination of video, audio, and USB over a single cable from the connected source device, greatly enhancing installation practicality. This transmitter is ideal for use in any video extension scenario, especially when latencyfree, uncompressed, high resolution video is critical, such as medical installations, live conferences, and education.

APPLICATIONS

•  Household entertainment sharing and control
• Lecture hall/classroom display and control
• Meeting room presentation and control

PACKAGE CONTENTS

• 1× UHD + USB-C over HDBaseT Transmitter with USB KVM
• 1× 24V/2.7A DC Power Adapter
• 2× 3-pin Terminal Block
• 1× 8-pin Terminal Block
• 1× Operation Manual

SYSTEM REQUIREMENTS

• USB-C source equipment such a media player, laptop, or tablet.
• HDMI receiving equipment such as an HDTV, monitor, or audio amplifier.
• A compatible HDBaseT 3.0 receiver with PoH (PD) support is recommended.
• The use of Premium High Speed HDMI cables, and industry standard Cat.6A or Cat.7 Ethernet cable is highly recommended.

FEATURES

•  USB-C (USB 3.0) video compatible

• HDMI 2.0 and DVI 1.0 compatible

• HDCP 2.2 and HDCP 1.x compliant

• HDBaseT 3.0 compliant (Backwards compatible with HDBaseT 2.0/1.0)

• 1 USB-C input

• 1 HDBaseT and 1 HDMI output

• Supports up to 4K UHD+ (18Gbps, 4K@60Hz 4:4:4, 8-bit) video output over both HDMI and HDBaseT

• Supports Deep Colour input and output up to 12-bit

• Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output

• Supports CEC bypass

• HDBaseT extends video, audio and data over a single Cat.6A/7 cable and can reach distances up to 70m/230ft

• HDBaseT feature support: HD Video and Audio, PoH (PSE), Bi- directional audio (analogue), and Control (bi-directional USB/IR/RS-232 pass-through)

• 2 USB 2.0 Type-A device ports and 1 USB-C host port

• Selectable USB-C audio extraction/analogue audio bypass functionality when paired with a compatible receiver
  Note: USB-C audio extraction is only available with LPCM 2.0 sources.

• HDMI output functions as a local monitor

• Can supply PoH to a connected compatible receiver
  Note : The PoH function is designed for powering compatible receiver units only. Non-PoH receivers will need their own power supply. Receivers from other brands may not be compatible.

OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

1. HDMI OUT port: Connect to an HDMI TV, monitor, or amplifier for digital video and audio output.

2. AUDIO IN 3-pin Terminal Block: Connect to the analogue audio output of a device such as a media player or game console using a 3-pin adapter cable. Audio is sent to the analogue audio output on the connected compatible receiver.

3. AUDIO OUT 3-pin Terminal Block: Connect to powered speakers or an amplifier for analogue audio output using a 3-pin adapter cable.
   Audio is sourced from the analogue audio input on the connected compatible receiver in bypass mode, or from the USB-C port in extract mode.

4. RS-232 4-pin Terminal Block: Connect to a PC, laptop, or serial controllable device with a 4-pin adapter cable for the extension of RS-232 signals between both ends of the HDBaseT connection.

5. IR 4-pin Terminal Block (In/Out): Connect to both an IR Blaster and Extender using a 4-pin Y-adapter cable to transmit and receive IR control signals and extend them to devices connected to the other end of the HDBaseT connection.

6. USB 2.0 Ports (Type-A): Connect directly to a standard USB device such as a mouse, keyboard, or flash drive to extend their USB functionality to the currently active USB host port.

7. AUDIO Button: Press this button to toggle the transmitter’s analogue audio out stream source between the receiver’s analogue audio input (bypass) and the USB-C input’s audio (extract).
   Note: Audio extraction is only available with LPCM 2.0 sources. Pressing this will also change the setting on compatible receivers.

8. BYPASS & EXTRACT LEDs: These LEDs will illuminate to indicate if the unit is in audio bypass (receiver’s analogue audio input) or extract mode (USB-C input).

9. POWER LED: This LED will illuminate to indicate the unit is on and receiving power.

10. LINK LED: This LED will illuminate solidly when a live connection with a compatible receiver is active.

6.2 Rear Panel

1. DC 24V Port: Plug the 24V DC power adapter into this port and connect it to an AC wall outlet for power.
2. CAT6A/7 OUT Port: Connect to a compatible HDBaseT receiver with a single Cat.6A/7 cable for extension of all data signals. PoH will also be supplied to a connected compatible PD receiver.
3. USB-C Port: Connect directly to a USB-C video and audio source such as a laptop, or tablet. USB functionality will also be extended to all currently connected USB devices on both ends of the HDBaseT connection.

6.3 IR Cable Pinouts
IR Blaster + IR Extender

6.4 Serial Pinout

6.5 Audio Pinouts
Stereo Audio Input

Stereo Audio Output

CONNECTION DIAGRAM

SPECIFICATIONS

8.1 Technical Specifications

1×Analog Stereo (3-pin Terminal Block)
Output Ports| 1×HDMI (Type-A)
1×HDBaseT (RJ-45)
1×Analog Stereo (3-pin Terminal Block)
Pass-through Ports| 1×IR In/Out (4-pin Terminal Block)
1×RS-232 (4-pin Terminal Block)
2×USB 2.0 (Type-A)
IR Frequency| 30 ~ 50kHz
(30 ~ 60kHz under ideal conditions)
Baud Rate| Up to 115200
Power Supply| 24V/2.7A DC
(US/EU standards, CE/FCC/UL certified)
ESD Protection (HBM)| ±8kV (Air Discharge)
±4kV (Contact Discharge)
Dimensions (W×H×D)| 128mm×25mm×108mm [Case Only] 128mm×25mm×112.5mm [All Inclusive]
Weight| 385g
Chassis Material| Metal (Steel)
Chassis Colour| Black
Operating Temperature| 0˚C – 50˚C/32˚F – 122˚F
Storage Temperature| -20˚C – 60˚C/-4˚F – 140˚F
Relative Humidity| 20 – 90% RH (Non-condensing)
Power Consumption| 18.5W

8.2 Video Specifications

8.3 Audio Specifications
8.3.1 Digital Audio

USB-C Input / HDMI & HDBaseT Output

LPCM
Max Channels| 8 Channels
Sampling Rate (kHz)| 32, 44.1, 48, 88.2, 96, 176.4, 192
Bitstream
Supported Formats| Standard & High-Definition

8.3.2 Analogue Audio

Analogue Input

Max Audio Level| 2Vrms
Impedance| 90.2kΩ
Type| Unbalanced
Analogue Output

Max Audio Level| 2Vrms
THD+N| < −80dB@0dBFS 1kHz (A-wt)
SNR| > 70dB@0dBFS
Frequency Response| < ±3dB@20Hz~20kHz
Crosstalk| < −60dB@10kHz
Impedance| 499Ω
Type| Unbalanced

8.4 Cable Specifications

High Speed HDMI Cable
HDMI Output| 10m| 5m| 3m|
USB-C Cable
USB-C Input| 2m| 1m|
Ethernet Cable
Cat.5e/6| 70m| 40m|
Cat.6A/7| 70m| 40m|

Bandwidth Category Examples:

• HD Video
  * 720p@60Hz
  – HDMI transmission rates lower than 3Gbps

• FHD Video
  – 1080p@60Hz
  – HDMI transmission rates between 3Gbps and 5.3Gbps

• 4K UHD Video
  – 4K@24/25/30Hz (8-bit colour) & 4K@50/60Hz (4:2:0, 8-bit colour)
  – HDMI transmission rates between 5.3Gbps and 10.2Gbps

• 4K UHD + Video
  – 1080p@120Hz (10/12-bit HDR)
  – 4K@50/60Hz (4:4:4, 8-bit) & 4K@50/60Hz (4:2:0, 10/12-bit HDR)
  – HDMI transmission rates between 10.2Gbps and 18Gbps

• 8K UHD Video
  – 4K@120Hz (10/12-bit HDR)
  – 8K@24/25/30Hz (10/12-bit HDR) & 8K@50/60Hz (4:2:0, 8-bit colour)
  – HDMI transmission rates between 18Gbps and 48Gbps

8.5 HDBaseT Features

ACRONYMS

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue,
Shepperton, Middlesex, TW17 8BA
Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279
Email: sales@cypeurope.com
www.cypeurope.com
RDV1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>