hama Bluetooth Audio Transceiver Instruction Manual

00 184093
Bluetooth® Audio Transceiver Bluteooth®-Audio-Sender/Empfänger

Operating Instructions

Operating instruction

Controls and Displays

1. Switch for Bluetooth® transmitter/receiver mode
2. Multifunction button
3. Status LED
4. 3.5 mm audio connection (AUX)
5. Micro-USB connection

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
**Note**
This symbol is used to indicate additional information or important notes.

Package Contents

• Bluetooth® transmitter/receiver,2-in-1adapter
•  3.5 mm jack cable
•  Micro-USB charging/connecting cable
•  These operating instructions

 Safety Notes

•  The product is intended for private, non-commercial use only.
•  Protect the product from dirt, moisture, and overheating, and only use it in an adry environment.
•  Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
• Do not allow yourself to be distracted by the product, for example when driving a vehicle or operating sports equipment. Always pay attention to the surrounding traffic and your environment.
•  Do not drop the product and do not expose it to any major shocks.
•  Do not operate the product outside the power limits given in the specifications.
•  Do not open the device or continue to operate it if it becomes damaged.
• Since the battery is integrated and cannot be removed, you will need to dispose of the product as a whole. Do this in compliance with the legal requirements.
•  Dispose of packaging material immediately according to locally applicable regulations.
•  Do not modify the product in any way. Doing so voids the warranty.
• Use the product for its intended purpose only.
• Use the item only in moderate climatic conditions.
• Do not use the product in areas where the use of electronic devices is not permitted.
•  Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
•  Do not throw the battery or the product into fire.
•  Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.
•  Take care that components such as airbags, safety areas, controls, instruments, etc., and visibility are not blocked or restricted.
• Check that the product is safely mounted before beginning your journey.

**** Warning –Battery

• Only use suitable charging devices or USB connections for charging.
• As a rule, do not charge devices or USB connections that are defective, and do not try to repair them yourself.
•  Do not overcharge the product or allow the battery to completely discharge.
•  Avoid storing, charging, or using the device in extreme temperatures and extremely low atmospheric pressure(for example, at high altitudes).
•  When stored over a long period of time, batteries should be changed regularly (at least every three months).

Getting Started

•  The adapter is equipped with a rechargeable battery. The battery must be fully charged before using the device for the first time.
•  Begin charging by connecting the included Micro-USB charging/connecting cable to the adapter’s Micro-USB connection (5) and to a suitable USB charger. Please refer to the operating instructions for the USB charger used.
•  The adapter’sstatus LED (3) emits a constant red light during charging.
•  It can take up to 1hour to fully charge the battery.
• Charging begins and ends automatically.

 Operation

5.1. Switching the adapter on/off

• Switching on:
  With the device off, press and hold the multifunction button (2) for 3seconds. The status LED (3) lights up in blue.

• Switching off:
  With the device on, press and hold the multifunction button (2) for 3seconds. The status LED (3) emits two red flashes before the device turns off.
  The first time the device is turned on, pairing is automatically started –see 5.2 Bluetooth® pairing in receiver (RX) mode.

Note –Pairing

•  Make sure that your Bluetooth® -capable terminal device is on and Bluetooth® is activated.
•  For more information, please refer to the operating instructions of your terminal device.
• Connect your terminal device to the adapter using the included 3.5 mm jack cable and the audio connection (AUX) (4).
•  Select the adapter’sRXmode by moving the switch (1) to the right.
•  The adapter and the terminal device should be no further than 10 meters apart. The shorter the distance, the better.
• With the adapter on, press the multifunction button (2) twice. After approximately 3seconds, the status LED (3) will emit flashes of alternating blue and red light to indicate the device is in pairing mode.
• Open the Bluetooth® settings on your terminal device and wait until Hama BT Transceiver appears in the list of Bluetooth® devices found.
• Select Hama BT Transceiver and wait until the adapter is listed as connected in the Bluetooth® settings on your terminal device.

Note –Bluetooth® password

Some terminal devices require a password in order to connect to another Bluetooth® device.
• If your terminal device requests apasswordtoestablish the connection, enter 0000, 1234, 1111, or 8888.

Note

•  If the pairing was successful, the status LED (3) lights up in blue.
• You can now use the adapter.

5.3. Bluetooth® pairing in transmitter (TX) mode

Note –Pairing

• Make sure that your Bluetooth® -capable terminal device is on and Bluetooth® is activated.
• For more information, please refer to the operating instructions of your terminal device.
•  Connect your terminal device to the adapter using the included 3.5 mm jack cable and the audio connection (AUX) (4).
• Select the adapter’sTXmode by moving the switch (1) to the left.
• Turn on Bluetooth® on your Bluetooth® headphones/speaker.
• For more information, please refer to the operating instructions of your terminal device.
•  The adapter and the Bluetooth® headphones/speaker should be no further than 10 meters apart. The shorter the distance, the better.
•  With the adapter on, press the multifunction button (2) twice. After approximately 3seconds, the status LED (3) will emit flashes of blue light to indicate the device is in pairing mode.
•  The connection is now established automatically.

5.4. Automatic Bluetooth® connection (after successful pairing)

Note –Pairing

• Make sure that your Bluetooth® -capable terminal device is on and Bluetooth® is activated.
• For more information, please refer to the operating instructions of your terminal device.
•  Make sure that the adapter is on.
•  After the devices have been paired once, the connection is then established automatically.
•  You can now use the adapter.

Note

•  If the pairing was successful, the status LED (3) will be lit blue.
• It may be necessary to make settings on your terminal device to enable automatic connection to the paired adapter.

Note –Connection impaired
After the devices have been paired once, the connection is then established automatically.IftheBluetooth® connection is not established automatically, check the following:

• Check the Bluetooth® settings of your terminal device to see whether Hama BT Transceivers are connected.
•  If not, repeat the steps listed in 5.2 Bluetooth®pairing.
•  Check whether obstacles are impairing the range. If so, move the devices closer together.
•  The performance can also be affected by a weak battery.

5.5. Pairing in transmitter (TX) mode with two devices at the same time

• Switch on the adapter and your two Bluetooth® -capable audio devices (BT headphones/speaker) as described in 5.2 Bluetooth® pairings.
• The adapter automatically names the two-terminal devices and B and establishes a connection.

5.6. Deleting the pairing list

•  Switch off the adapter in the current mode (TX or RX). After approximately 3seconds, move the switch (1) to the other mode and switch the adapter on again; this will delete all paired devices from the list.

5.7. Battery capacity

• The status LED (3) begins flashing red when the battery charge is low.
•  Charge the adapter as described in 4. Getting started.

 Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Recycling Information

Note on environmental protection:
After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices/Batteries, you are making an important contribution to protecting our environment.

Declaration of Conformity

Hereby, Hama GmbH &CoKGdeclares that the radio equipment type [00184093] is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: www.hama.com -> 00184093 -> Downloads.

Hama GmbH & Co KG
86652 Monheim / Germany
Service & Support
www.hama.com
+49 9091 502-0 DG
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Hama GmbH & Co KG is under license. Other trademarks and trade names are those of their respective owners. All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

00184093/11.20

References

• hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>