CYP PUV-2200PL-TX-RX HDBaseT Transmitter Instruction Manual

CYP PUV-2200PL-TX-RX HDBaseT Transmitte

DISCLAIMERS

The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document and/or product at any time and without notice.

COPYRIGHT NOTICE

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means—electronic, mechanical, magnetic,optical, chemical, manual, or otherwise—without express written permission and consent from CYP (UK) Ltd. © Copyright 2021 by CYP (UK) Ltd. All Rights Reserved. Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply Please keep the following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.

REVISION HISTORY

INTRODUCTION

This 4K UHD HDMI over HDBaseT transmitter and receiver pair uses HDBaseT 2.0 technology, and is the perfect solution for extending high bandwidth HDMI 4K@60Hz (4:2:0, 8-bit) video (10.2Gbps) with HD audio via a single run of Cat.6A/7 cable over distances of up to 40 metres. Multiple control and data signals may also be transmitted along with the HD audio and video, including bi-directional IR, RS-232, bi-directional analogue audio, and USB 2.0. When the transmitter and receiver are used together, the USB 2.0 Type-B port on the transmitter can connect a single USB host (such as a laptop or PC) to devices on up to 5 USB 2.0 (Type-A) ports (2 on the transmitter, 3 on the receiver) forming a highly powerful KVM extension configuration. Additionally, the receiver is powered by PoH (Power over HDBaseT) provided by the transmitter, allowing for greater flexibility within different installation scenarios. This transmitter and receiver pair is ideal for use in any video extension scenario, but they excel when latency-free, uncompressed, high resolution video

APPLICATIONS

• Household entertainment sharing and control
• Lecture hall/classroom display and control
• Meeting room presentation and control

PACKAGE CONTENTS

Transmitter

• 1× UHD HDMI/USB to HDBaseT Transmitter
• 1× 24V/2.7A DC Power Adapter
• 1× 3-pin Terminal Block
• 1x 4-pin Terminal Block
• 1× Operation Manual

Receiver

• 1× UHD HDBaseT to HDMI/USB Receiver
• 1× 3-pin Terminal Block
• 1x 4-pin Terminal Block
• 1× Operation Manual

SYSTEM REQUIREMENTS

• HDMI source equipment such a media player, video game console, or set-top box.
• HDMI receiving equipment such as an HDTV, monitor, or audio amplifier.
• The use of Premium High Speed HDMI cables, and industry standard Cat.6A or Cat.7 Ethernet cable is highly recommended.

FEATURES

• HDMI 2.0 and DVI 1.0 compatible
• HDCP 2.2 and HDCP 1.x compliant
• HDBaseT 2.0 compliant (Backwards compatible with 1.0)
• 1 HDMI input and 1 HDBaseT output (Transmitter)
• 1 HDMI output, and 1 HDBaseT input (Receiver)
• Supports up to 4K UHD (10.2Gbps, 4K@60Hz 4:2:0, 8-bit) video input and output over both HDMI and HDBaseT
• Supports Deep Colour input and output up to 12-bit
• Supports CEC bypass
• HDBaseT extends video, audio and data over a single Cat.6A/7 cable and can reach distances up to 40m/131ft
• HDBaseT feature support: HD Video and Audio, PoH (Tx to Rx), Bi-directional audio (analogue), and Control (bi-directional USB/IR/RS-232 pass-through) 2 USB 2.0 Type-A device ports and 1 USB 2.0 Type-B host port (Transmitter)
• 3 USB 2.0 Type-A device ports (Receiver)
• Supports pass-through of digital audio formats including 8 channel LPCM, Bitstream and HD Bitstream
• Selectable stereo/microphone analogue audio bypass functionality Transmitter can supply PoH to the connected receiver
• Receiver is powered directly via PoH from the connected transmitter
  Note: A compatible PSE transmitter providing PoH is required to power this receiver. Transmitters from other brands may not be compatible.

OPERATION CONTROLS AND FUNCTIONS

Front Panel (Transmitter)

1. F/W & STD Switch: Move this switch to toggle the RS-232 port’s functionality between firmware update and RS-232 bypass mode. The default setting is “STD” (RS-232 Bypass).
2. RS-232 3-pin Terminal Block: Connect to a PC, laptop, or serial controllable device with a 3-pin adapter cable for the extension of RS-232 signals between both ends of the HDBaseT connection.
3. USB 2.0 Ports (Type-A): Connect directly to standard USB devices such as a mouse, keyboard, or flash drive to extend their USB functionality to the local USB (Type-B) host port.
4. LINE OUT Port: Connect to powered speakers or an amplifier for analogue udio output. Audio is sourced from the analogue audio input on the connected compatible receiver.
5. LINE IN Port: Connect to the analogue audio output of a device such as a media player or game console. Audio is sent to the analogue audio output on the connected compatible receiver.
6. MIC IN Port: Connect to a standard unpowered microphone using a 3.5mm plug.
7. LINE & MIC Switch: Move this switch to toggle the analogue audio source to send to the other end of the HDBaseT connection between LINE IN or MIC IN. The default setting is “LINE”.
8. POWER LED: This LED will illuminate to indicate the unit is on and eceiving power.
9. LINK LED: This LED will illuminate solidly when a live connection with a compatible receiver is active.

Rear Panel (Transmitter)

1. DC 24V: Plug the 24V DC power adapter into this port and connect it to an AC wall outlet for power.

2. IR 4-pin Terminal Block (In/Out): Connect to both an IR Blaster and Extender using a 4-pin Y-adapter cable to transmit and receive IR control signals and extend them to devices connected to the other end of the HDBaseT connection.

3. USB 2.0 Port (Type-B): Connect directly to a standard USB host such as a PC or laptop to extend their USB functionality to all currently connected USB devices on both ends of the HDBaseT connection.

4. CAT5e/6/7 OUT Port: Connect to a compatible HDBaseT receiver with a single Cat.6A/7 cable for extension of all data signals. PoH will also be supplied to a connected compatible PD receiver.
   Note: The PoH function is designed for powering compatible receiver units only. Non-PoH receivers will need their own power supply. Receivers from other brands may not be compatible.

5. HDMI IN Port: Connect to HDMI source equipment such as a media player, game console, or set-top box.

Front Panel (Receiver)

1. F/W & STD Switch: Move this switch to toggle the RS-232 port’s functionality between firmware update and RS-232 bypass mode. The default setting is “STD” (RS-232 Bypass).
2. RS-232 3-pin Terminal Block: Connect to a PC, laptop, or serial controllable device with a 3-pin adapter cable for the extension of RS-232 signals between both ends of the HDBaseT connection.
3. USB 2.0 Ports (Type-A): Connect directly to standard USB devices such as a mouse, keyboard, or flash drive to extend their USB functionality to the USB (Type-B) host port on the connected transmitter.
4. LINE IN Port: Connect to the analogue audio output of a device such as a media player or game console. Audio is sent to the analogue audio output on the connected compatible transmitter.
5. LINE OUT Port: Connect to powered speakers or an amplifier for analogue audio output. Audio is sourced from the analogue audio input on the connected compatible transmitter.
6. MIC IN Port: Connect to a standard unpowered microphone using a 3.5mm plug.
7. LINE & MIC Switch: Move this switch to toggle the analogue audio source to send to the other end of the HDBaseT connection between LINE IN or MIC IN. The default setting is “LINE”.
8. POWER LED: This LED will illuminate to indicate the unit is on and receiving power.
9. LINK LED: This LED will illuminate solidly when a live connection with a compatible receiver is active.

Rear Panel (Receiver)

1. IR 4-pin Terminal Block (In/Out): Connect to both an IR Blaster and Extender using a 4-pin Y-adapter cable to transmit and receive IR control signals and extend them to devices connected to the other end of the HDBaseT connection.

2. USB 2.0 Port (Type-A): Connect directly to a standard USB device such as a mouse, keyboard, or flash drive to extend their USB functionality to the USB (Type-B) host port on the connected transmitter.

3. CAT5e/6/7 IN Port: Connect to a compatible HDBaseT transmitter with a single Cat.6A/7 cable for extension of all data signals. Power via PoH will also be supplied to this unit when connected to a compatible PSE transmitter.
   Note: A compatible PoH (PSE) transmitter is REQUIRED to power this receiver.

4. HDMI OUT Port: Connect to an HDMI TV, monitor, or amplifier for digital video and audio output.

RS-232 Pinout

IR Pinout

CONNECTION DIAGRAM

SPECIFICATIONS

Technical Specifications (Transmitter)

Technical Specifications (Receiver)

Video Specifications

Supported Resolutions (Hz)

| Input| Output
---|---|---
HDMI| HDBT| HDMI| HDBT
720×400p@70/85| P| P| P| P
640×480p@60/72/75/85| P| P| P| P
720×480i@60| P| P| P| P
720×480p@60| P| P| P| P
720×576i@50| P| P| P| P
720×576p@50| P| P| P| P
800×600p@56/60/72/75/85| P| P| P| P
848×480p@60| P| P| P| P
1024×768p@60/70/75/85| P| P| P| P
1152×864p@75| P| P| P| P
1280×720p@50/60| P| P| P| P
1280×768p@60/75/85| P| P| P| P
1280×800p@60/75/85| P| P| P| P
1280×960p@60/85| P| P| P| P
1280×1024p@60/75/85| P| P| P| P
1360×768p@60| P| P| P| P
1366×768p@60| P| P| P| P
1400×1050p@60| P| P| P| P
1440×900p@60/75| P| P| P| P
1600×900p@60RB| P| P| P| P
1600×1200p@60| P| P| P| P
1680×1050p@60| P| P| P| P
1920×1080i@50/60| P| P| P| P

Supported Resolutions (Hz)

| Input| Output
---|---|---
HDMI| HDBT| HDMI| HDBT
1920×1080p@24/25/30| P| P| P| P
1920×1080p@50/60| P| P| P| P
1920×1200p@60RB| P| P| P| P
2560×1440p@60RB| P| P| P| P
2560×1600p@60RB| P| P| P| P
2048×1080p@24/25/30| P| P| P| P
2048×1080p@50/60| P| P| P| P
3840×2160p@24/25/30| P| P| P| P
3840×2160p@50/60 (4:2:0)| P| P| P| P
3840×2160p@24, HDR10| O| O| O| O
3840×2160p@50/60 (4:2:0),HDR10| ****

O

| ****

O

| ****

O

| ****

O

3840×2160p@50/60| O| O| O| O
4096×2160p@24/25/30| P| P| P| P
4096×2160p@50/60 (4:2:0)| P| P| P| P
4096×2160p@24, HDR10| O| O| O| O
4096×2160p@50/60 (4:2:0),HDR10| ****

O

| ****

O

| ****

O

| ****

O

4096×2160p@50/60| O| O| O| O

Audio Specifications

Digital Audio

HDMI Input / Output

LPCM
Max Channels| 8 Channels
Sampling Rate (kHz)| 32, 44.1, 48, 88.2, 96, 176.4, 192
Bitstream
Supported Formats| Standard & High-Definition

Analogue Audio

Analogue Input (Stereo)

Max Audio Level| 2Vrms
Impedance| 10kΩ
Type| Unbalanced
Analogue Input (Microphone)
Max Audio Level| 20Vrms
Impedance| 20kΩ
Type| Unbalanced
Analogue Output

Max Audio Level| 2Vrms
THD +N| < −80dB@0dBFS 1kHz (A-wt)
SNR| > 93dB@0dBFS
Frequency Response| < ±0.5dB@20Hz~20kHz
Crosstalk| < −71dB@10kHz
Impedance| 500Ω
Type| Unbalanced

Cable Specifications

Cable Length

| 1080p| 4K30| 4K60
---|---|---|---

8- bit

| ****

12- bit

| (4:4:4)

8- bit

| (4:4:4)

8- bit

High Speed HDMI Cable
HDMI Input| 10m| 10m| 5m| O
HDMI Output| 10m| 10m| 5m| O
Ethernet Cable
Cat.5e/6| 60m| 35m| O
Cat.6A/7| 70m| 40m| O

Bandwidth Category Examples: 1080p (FHD Video)

• Up to 1080p@60Hz, 12-bit colour
• Data rates lower than 5.3Gbps or below 225MHz TMDS clock

4K30 (4K UHD Video)

• 4K@24/25/30Hz & 4K@50/60Hz (4:2:0), 8-bit colour
• Data rates higher than 5.3Gbps or above 225MHz TMDS clock but below 10.2Gbps

4K60 (4K UHD+ Video)

• 4K@50/60Hz (4:4:4, 8-bit)
• 4K@50/60Hz (4:2:0, 10-bit HDR)
• Data rates higher than 10.2Gbps

HDBaseT Features

ACRONYMS

Blanking)
XGA| Extended Graphics Array
Ω| Ohm

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>