CYP WPS-HP201T Hyshare Pro Pod User Guide

WPS-HP201T
Hyshare Pro Pod
Quick Start Guide

PACKAGE CONTENTS

1. Hyshare Pro Pod x 2
2. Quick Start Guide x 1

HYSHARE PRO POD OVERVIEW

• LED
• Cast Button
• Function Button
• USB-C, Power Rating: 5V 900mA

START USING HYSHARE PRO POD

1. Pair Hyshare Pro Pod
   Step 1. Ensure Hyshare Pro firmware version is 1.0.0.36 or newer.
   Step 2. Connect the Pod to the USB-C port of Hyshare Pro.
   Step 3. Users may check the main screen message for pairing status.
   Breathing green: paring; steady green: pairing finished

2. Start the presentation

Step 1. Connect the Pod to your device’s USB-C port.
Step 2. Wait until the LED light becomes steady white, press the cast button to share. The LED light is steady blue while screen sharing
Step 3. Long press cast button to switch between full-screen and splitscreen.
Step 4. Press cast button again and stop sharing.

LED COLOR DEFINITION

Station again
Amber| Connection| Station connection failed or disconnected Please replug the Pod
Pink| Connection| USB-C doesn’t support A/V output

FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause  undesired operation.
IMPORTANT NOTE:
This device has been tested with 5mm separation distance SAR, and it is compliant with the general population/uncontrolled RF exposure limit.

CYPRESS TECHNOLOGY CO., LTD.
www.cypress.com.tw

References

• Cypress Technology Co., Ltd. a ProAV solution provider. CYP target on vertical markets of enterprise, education, hospitality, Industry IoT and medical.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>