Disney SX-210 TWS Bluetooth Earphone User Manual
- July 30, 2024
- DiSNEY
Table of Contents
Disney Series
TWS Bluetooth Earphone
User Manual
SX-210 TWS Bluetooth Earphone
-
Product Model: SX-210
-
Bluetooth Version: v5.3
-
Speaker: Φ13mm dynamic neodymium magnet, 32Q±15%
-
Frequency Range: 20Hz-20kHz
-
Output Sound Pressure Level: 105±3dB
-
Battery Type: Rechargeable lithium-ion polymer battery
-
Battery Capacity: Earphone (35mAh), Case (300mAh)
-
Battery Life: Earphones last 5.5 hours at 60% volume
Case extends usage to 16.5 hours. -
Input Power: DC-5V/200mA
-
Charging Time: Earphones (1.5 hours), Charging Case (1.5 hours)
-
Quick Charge: 10 minutes charging = 2 hours of usage
-
Connection Distance: 10 meters
-
Supported Protocols: HSP/HFP/A2DP/AVRCP
-
Audio Codecs: AAC/SBC
-
Product Weight: 40g (Earphones 7g + Charging Case 33g)
-
Waterproof Rating : IPX4
-
Package Contents: Earphones x2, Charging Case x1
Type-C Charging Cable
Operation Instructions
Bluetooth Connection
Connect to Bluetooth by selecting “SX-210” in your device settings.
A voice prompt “Bluetooth connected” indicates successful connection.
Quick Operations
| Answer/End Call| | Double Tap Either Side
---|---|---|---
| Reject Call (Incoming)| | Long Press Either Side
| Play/Pause| | Single Tap Either Side
| Previous Track| | Triple Tap Either Side
| Next Track| | Double Tap Either Side
| Voice Assistant| | Long Press Left (L) Side
| Game/Music Mode| | Long Press Right (R) Side
- Remove Earphones
- Place earphones in ear canal, gently rotate to adjust to optimal fit.
LED Indicator
- Charging Box Charging Process: Red light flashing
- Charging Box Charging Earphones: Blue light steady
- Charging Box Fully Charged: Red light steady
- Charging Box Charging Earphones: Blue light steady
- Charging Box Earphones Fully Charged: Blue light off
Working/Charging Time (Full Charge)
| Music Playback | 5.5 hours. (60% volume) |
|---|---|
| Standby Time | 72 hours |
| Talk Time | 4.5 hours |
| Time Required to Charge Earphones | 1.5 hours |
Note ● The fully charged charging box can provide power for the earphones for up to four cycles.
Troubleshooting
One Earphone Silent or Earphones Disconnecting (Automatic Pairing)
If one earphone is silent or if the earphones disconnect, they will enter
automatic pairing mode. Manual pairing is not required; the devices will
connect automatically.
Bluetooth Device Not Connected/Reconnecting
- Access your device’s Bluetooth settings, and delete or forget “SX-210,” as shown in Figure A.
- Turn off Bluetooth on your phone, as shown in Figure B.
- Place the earphones in the charging case and close the lid. Wait for one minute, then remove the earphones (keep the distance between the two earphones within 20CM) and wait for 30 seconds.
- Turn Bluetooth back on your phone, search for and connect to “SX-210.”