smartmi D694679-B Evaporative Humidifier 3 User Manual

smartmi D694679-B Evaporative Humidifier 3 User Manual

WARNING

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Keep the appliance out of the reach of children. Steam and boiling water may cause burns.
• Be aware that high humidity levels may encourage the growth of biological organisms in the environment.
• Do not permit the area around the humidifier to become damp or wet. If dampness occurs, turn the output of the humidifier down. If the humidifier output volume cannot be turned down, use the humidifier intermittently. Do not allow absorbent materials, such as carpeting, curtains, drapes, or tablecloths, to become damp.
• Unplug the appliance during filling and cleaning.
• Never leave water in the reservoir when the appliance is not in use.
• Empty and clean the humidifier before storage. Clean the humidifier before next use.
• To prevent electric shocks, fire, personal injury and other damage, do not use the humidifier when:
  • The main body of the humidifier is tilted. Tilting the humidifier may cause the water level to be reported incorrectly or the water to overflow. The humidifier should be placed on a flat and stable surface while in use.
  • There are nearby objects that may fall or are unstable.
  • In hot, humid or wet places such as bathrooms.
• Power the humidifier using the standard adapter supplied with the humidifier. Due to safety considerations, damaged adapters or power cords must be replaced by the manufacturer or a professional from a designated repair service provider.
• For Use Only With Zhongshan Baolijin Electronic Co.,Ltd. BLJ9W120075P-VA Charger.
• Do not disassemble the product yourself unless disassembly is required for maintenance. For repair information, contact Smartmi Customer Service.

Product Overview

Package Contents: Unit, Power Adapter, User Manual
Read this manual carefully before use, and retain it for future reference.

Front

Rear
Tips: In this manual, the illustrations of the product and its accessories and the user interface are schematic diagrams for reference only. The actual product may vary from that shown in the schematic diagrams due to product updates and upgrades. Please refer to the actual product.

Display description

MAX: high speed
SLEEP: low speed
A : AUTO: Speed set automatically according to current humidity

Note: When minimum water level detected, Refill indicator flashes red. When minimum water level exceeded, Filled indicator lights up.
When maximum water level reached, Full indicator flashes.

How to Use

Filling the device

To avoid scaling, use purified water.

1. Fill via water inlet
   Fill water via water inlet and stop before reaching maximum water level (MAX line on transparent display panel).

2. Pour directly into water tank
   Remove lid and pour water directly into water tank, stop before reaching maximum water level (MAX line on transparent display panel or water collector).
   

Note: Stop filling as soon as tank reaches Full state (Full indicator flashes, device beeps, and Full indicator remains on).

• On/Standby
  Press “On/Standby” button to start humidifier and resume previous working level. The humidifier level is AUTO level when started for the first time. Short press “On/Standby” button again to stop humidifier.
  

• Wi-Fi resetting
  Press and hold “Level Switch” button for 7 seconds, Wi-Fi icon flashes, device initiates network connection.
  Reset successful.

• Level adjustment
  Press “Level Switch” button to switch between Sleep, MAX, and AUTO levels and light corresponding indicator.
  

• Wi-Fi On/Standby
  Press and hold “On/Standby” button and “Level Switch” button at the same time for 7 seconds to disable Wi-Fi when device is on. Enable WiFi again by pressing and holding “On/Standby” button and “Level Switch” button at the same time for 7 seconds.
  

Connecting with the Mi Home/Xiaomi Home App **

**

This product works with the Mi Home/Xiaomi Home app*. Use the Mi Home/Xiaomi Home app to control your device, and to interact with other smart home devices.

Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search for “Mi Home/Xiaomi Home” in the app store to download and install it.Open the Mi Home/Xiaomi Home app, tap “+” on the upper right, and then follow the instructions to add your device.

Note: The version of the app might have been updated, please follow the instructions based on the current app version.

C 3916 C 90

Adjustment of the display brightness

Adjust brightness of display via APP.
Three display status possible: on, dim, off (except for button indicators).
SLEEP level screen is dim.

Care & Maintenance

Be sure to stop humidifier, power off, and attach rubber plug before proceeding with the following operations.

Cleaning the evaporator
Remove evaporator and wipe with a soft cloth or rinse with clean water. Unfasten end cover and remove each disc for servicing and cleaning.

Rotate end cover clockwise to remove evaporator discs.

Cleaning the water collector

Hold water collector handle and pull up to remove water collector. Rinse water collector with clean water and put it back in place.

Note: Clean with plain room temperature water only. Do not add special fragrances to the water. Please empty water tank and water collector after each use to prevent bacteria and possible contamination.

Tip: Clean the device once a week or based on the actual frequency of use.

Cleaning the water tank

To prevent contamination and odor in water tank, rinse with clean water or wipe with a soft cloth.
There are drainage holes at the bottom of the water tank.
Do not use the water tank straight away after it has been fully rinsed or after adding too much water by accident.
Instead, place the water tank on the ground with the drainage holes facing down to drain the water from inside the tank.

Note: Do not immerse water tank. During the cleaning process, cover the power port with rubber plug to keep water out.

Air-drying mode

For low water levels with Air-drying mode enabled, humidifier air dries water tank to avoid contamination and odor and then automatically shuts down.

Tip: Enable/disable Air-drying mode via “Mi Home / Xiaomi Home” app.

Self-cleaning mode

Enable Self-cleaning mode via “Mi Home / Xiaomi Home” app. After enabling, humidity indicator on display scrolls in rotation, air outlet stops blowing, evaporator continues rotating in water tank to soak and clean evaporator and eliminate odors. Reminder is displayed on App after 30 minutes, and the device automatically shuts down with a beep.
Disable Self-cleaning mode via “Mi Home / Xiaomi Home” app or briefly press “On/Standby” button to end self cleaning.
Note:

1. To avoid deforming the evaporator, avoid using water above 35 °C to clean the humidifier.
2. To avoid corrosion or chemical burns to water tank and/or evaporator, do not use acid, alkali, or corrosive detergents for cleaning.

Notes

Moving

• Always turn the humidifier off and unplug it before moving it.
• Before handling or moving the humidifier, drain any remaining water from the water tank.

Assembling

• Follow the instructions to install the humidifier correctly to prevent electric shocks, fire, personal injury, and other damage.
• Do not turn the humidifier on before it is fully assembled.

Adapter
Follow the instructions below when using the adapter to prevent electric shocks, fire, or damage:

• Connect the adapter plug to an appropriate outlet.
• Do not pinch, bend, or twist the adapter cord excessively. Otherwise, the wire inside may be broken or exposed.
• Unplug the humidifier before servicing or moving the humidifier.

In Use

• If the humidifier generates abnormal noises, produces odors or becomes hot, turn it off immediately.
• Do not put fingers or foreign objects into safety parts, movable parts, air inlets or outlets.
• Do not let objects such as hair or fabric come near the main unit, as these objects may get caught in or block the air inlets and outlets.
• Do not lean on or tilt the humidifier while in use.
• Ensure sufficient ventilation when using the humidifier at the same time as household gas appliances (such as gas stoves and gas water heaters) to prevent carbon monoxide poisoning.
• Pure water is recommended for the humidifier.
• Depending on the water quality, tap water may cause scale buildup on the pump, filter, inner wall of the water tank, and the transparent window. Scale buildup will affect the normal operation of the humidifier, in which case the humidifier will need to be cleaned as per the instructions in the Maintenance and Care section.

Storage and transportation

• Before long-term storage, make sure that the water tank and the evaporative tank of the humidifier are completely dry, then put the humidifier assembled for storage in a cool dry place.
• The device should be placed away from heat sources and out of direct sunlight.
• Do not transport at extreme temperatures.

Warnings

• To avoid damaging the humidifier, do not add water of more than 35°C to the water tank.
• Unplug the humidifier before adding water or cleaning.
• The water tank MAX indicates the level beyond which no more water should be added.

Specifications

When equipment is not providing a main function, the equipment can automatically switches into standby mode / network standby mode within 1 minute.
RF Specification:
Wi-Fi 2.4G (2400-2483.5 MHz), Max. RF Output Power: <20 dBm Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user
Note: Noise is measured in a laboratory environment.

Power Adapter

Regulatory Compliance Information

Europe — EU declaration of conformity

Hereby, Beijing Smartmi Electronic Technology Co., Ltd. declares that the radio equipment – Smartmi Evaporative
Humidifier 3, type CJXJSQ05ZM is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.smartmiglobal.com/doc.html

Disposal and recycling information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/ EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

References

• Smartmi Store | Design For Your Smart Life - smartmi EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>