AEG IAE84881FB Induction Hob User Manual

AEG IAE84881FB Induction Hob

Product Information

The IAE84881FB is an AEG Induction Hob with Assisted Cooking and Pan Fry features. The cooking surface layout has five zones, including one induction zone with Assisted Cooking, one induction zone with Pan Fry, and three regular induction cooking zones. The hob has a control panel with various settings and symbols for easy operation. The product comes with a user manual that provides safety instructions, installation guidelines, and care and cleaning instructions. The manufacturer recommends using original spare parts to ensure the appliance’s optimal performance.

Product Usage Instructions

Installation
Before installing the hob, read the supplied instructions carefully. Only a qualified person must install this appliance. The manufacturer is not responsible for any injuries or damage resulting from incorrect installation. If you install the hob under a hood, refer to the hood’s installation instructions for the minimum distance between the appliances. If the appliance is installed above a drawer, be aware that the hob ventilation can warm up the items stored in the drawer during the cooking process.

Electrical Connection
Have a qualified electrician connect the hob to the electrical supply. Improper electrical connections can result in the risk of fire and electric shock.

Use
When using the hob, be careful of the risk of injury, burns, and electric shock. The hob is heavy, so always use safety gloves and enclosed footwear when handling it. Do not put anything on the hob in the area with an antenna. The manufacturer warns of the risk of fire and explosion when using non- original spare parts.

Food Sensor
The hob comes with a food sensor to assist in cooking. Follow the instructions in the user manual for proper usage.

Care and Cleaning

Refer to the user manual for care and cleaning instructions. Do not use abrasive cleaners or products that contain chlorine, bleach, or ammonia, as they can damage the hob’s surface.

Service
If you need service or repair, contact the authorized service center. Have the model, PNC, and serial number available when contacting the service center. The information is available on the hob’s rating plate.

Disposal
Dispose of the hob according to local regulations to avoid the risk of injury or suffocation.

IAE84881FB
USER MANUAL

EN User Manual Hob

FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support
Register your product for better service: www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.
Warning / Caution-Safety information General information and tips Environmental information
Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrectinstallation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety · This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children of less than 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. · Children should be supervised to ensure that they do not play with the appliance. · Keep all packaging away from children and dispose of it appropriately. · WARNING: The appliance and its accessible parts become hot during use. Keep children and pets away from the appliance when in use and when cooling down. · If the appliance has a child safety device, it should be activated. · Children shall not carry out cleaning and user maintenance of the appliance without supervision. 1.2 General Safety · WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. · WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. · NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. · WARNING: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.
ENGLISH 3

· CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously.
· WARNING: Danger of fire: Do not store items on the cooking surfaces.
· Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
· Do not use the appliance before installing it in the built-in structure.
· Do not use a steam cleaner to clean the appliance. · After use, switch off the hob element by its control and do
not rely on the pan detector. · If the glass ceramic surface / glass surface is cracked,
switch off the appliance and unplug it from the mains. In case the appliance is connected to the mains directly using junction box, remove the fuse to disconnect the appliance from power supply. In either case contact the Authorised Service Centre. · If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Service or similarly qualified persons in order to avoid a hazard. · WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents.

SAFETY INSTRUCTIONS

Installation
WARNING! Only a qualified person must install this appliance.
WARNING! Risk of injury or damage to the appliance.

· Remove all the packaging. · Do not install or use a damaged
appliance. · Follow the installation instructions
supplied with the appliance. · Keep the minimum distance from other
appliances and units. · Always take care when moving the
appliance as it is heavy. Always use safety gloves and enclosed footwear.

4 ENGLISH

· Seal the cut surfaces with a sealant to prevent moisture from causing swelling.
· Protect the bottom of the appliance from steam and moisture.
· Do not install the appliance next to a door or under a window. This prevents hot cookware from falling from the appliance when the door or the window is opened.
· Each appliance has cooling fans on the bottom.
· If the appliance is installed above a drawer: ­ Do not store any small pieces or sheets of paper that could be pulled in, as they can damage the cooling fans or impair the cooling system. ­ Keep a distance of minimum 2 cm between the bottom of the appliance and parts stored in the drawer.
· Remove any separator panels installed in the cabinet below the appliance.
2.2 Electrical Connection
WARNING! Risk of fire and electric shock.
· All electrical connections should be made by a qualified electrician.
· The appliance must be earthed. · Before carrying out any operation make
sure that the appliance is disconnected from the power supply. · Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. · Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot. · Use the correct electricity mains cable. · Do not let the electricity mains cable tangle. · Make sure that a shock protection is installed. · Use the strain relief clamp on the cable. · Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to a socket. · Do not use multi-plug adapters and extension cables.

· Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable.
· The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
· Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
· If the mains socket is loose, do not connect the mains plug.
· Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
· Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
· The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.
2.3 Use
WARNING! Risk of injury, burns and electric shock.
· Do not change the specification of this appliance.
· Remove all the packaging, labelling and protective film (if applicable) before first use.
· Make sure that the ventilation openings are not blocked.
· Do not let the appliance stay unattended during operation.
· Set the cooking zone to “off” after each use.
· Do not put cutlery or saucepan lids on the cooking zones. They can become hot.
· Do not operate the appliance with wet hands or when it has contact with water.
· Do not use the appliance as a work surface or as a storage surface.
· If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply. This to prevent an electrical shock.

ENGLISH 5

· Users with a pacemaker must keep a distance of minimum 30 cm from the induction cooking zones when the appliance is in operation.
· When you place food into hot oil, it may splash.
WARNING! Risk of fire and explosion
· Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them.
· The vapours that very hot oil releases can cause spontaneous combustion.
· Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time.
· Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
WARNING! Risk of damage to the appliance.
· Do not keep hot cookware on the control panel.
· Do not put a hot pan cover on the glass surface of the hob.
· Do not let cookware boil dry. · Be careful not to let objects or cookware
fall on the appliance. The surface can be damaged. · Do not activate the cooking zones with empty cookware or without cookware. · Do not put aluminium foil on the appliance. · Cookware made of cast iron or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface.
2.4 Food Sensor
· Use the Food Sensor according to its purpose. Do not use it to open or lift anything.
· Use only the Food Sensor recommended for the hob, one at a time.
· Do not use it when it is malfunctioning or damaged.
· Do not use the Food Sensor in the oven or microwave.

· The Food Sensor can read temperatures up to 120 °C.
· Make sure that the Food Sensor is always inside the food or liquid, up to the minimum level mark.
· Clean the Food Sensor before the first use. Use only neutral detergents. Do not use any abrasive products, abrasive cleaning pads, solvents or metal objects. Do not wash the Food Sensor in the dishwasher. The silicone handle may discolour, which has no effect on how the Food Sensor operates.
· Use the original packaging to store the Food Sensor.
· If you replace the Food Sensor, store the old one minimum 3 m away. The old Food Sensor may influence the functioning of the new one.
2.5 Care and cleaning
· Clean the appliance regularly to prevent the deterioration of the surface material.
· Switch off the appliance and let it cool down before cleaning.
· Do not use water spray and steam to clean the appliance.
· Clean the appliance with a moist soft cloth. Use only neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
2.6 Service
· To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
· Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.

6 ENGLISH

2.7 Disposal
WARNING! Risk of injury or suffocation.
· Contact your municipal authority for information on how to dispose of the appliance.

· Disconnect the appliance from the mains supply.
· Cut off the mains electrical cable close to the appliance and dispose of it.

3. INSTALLATION

WARNING! Refer to Safety chapters.

3.1 Before the installation
Before you install the hob, write down the information below from the rating plate. The rating plate is on the bottom of the hob.
Serial number ………………………
3.2 Built-in hobs
Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards.
3.3 Connection cable
· For a single phase or two phase connection, use the cable type: H03V2V2F or H05BB-F which withstands a temperature of 90 °C or higher.
· To replace the damaged mains cable, use the cable: H03V2V2-F or H05BB-F which withstands a temperature of 90 °C or higher. Contact an Authorised Service Centre. The connection cable may only be replaced by a qualified electrician.
3.4 Assembly
If you install the hob under a hood, please see the installation instructions of the hood for the minimum distance between the appliances.

min. 500mm

min. 50mm

If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process.
Combination with standard oven

780

520

75 335

23

44 550

min. 55

490+1

750+1

max R5

min. 1500

min.min.

min.

12 55

28

ENGLISH 7

Combination with double oven

A = min. 12 mm, for double ovens from other brands. Find the video tutorial “How to install your AEG Induction Hob – Worktop installation” by typing out the full name indicated in the graphic below.
www.youtube.com/electrolux www.youtube.com/aeg
How to install your AEG Induction Hob – Worktop installation

A = min. 6 mm, for double ovens from AEG, Electrolux and Zanussi.
4. PRODUCT DESCRIPTION
4.1 Cooking surface layout
5
1 4
4 2
3

1 Induction zone with Assisted Cooking 2 Induction zone with Assisted Cooking
and Pan Fry 3 Control panel 4 Induction cooking zone 5 Area with antenna
CAUTION! Do not put anything on the hob in this area.

4.2 Control panel layout

1

23 4

56

7

8

9

14 13

12

To see the available settings touch the appropriate symbol.

8 ENGLISH

11 10

Symbol 1 2 3 4 56 78 9

10

11 12 0 – 9 13

14

/

Comment ON / OFF Menu Food Sensor Zone selection Zone indicator Slider PowerBoost Lock –
Pause Bridge Signal indicators

4.3 Food Sensor

12 3 4 5

6

To activate and deactivate the hob.
To open and close the Menu.
To open the Food Sensor menu.
To open the slider for the selected zone.
To show for which zone the slider is active. To set the timer functions.
To adjust the heat setting. To activate the function.
To activate and deactivate the function.
The window of the Hob²Hood infrared signal communicator. Do not cover it. To activate and deactivate the function.
To show the current heat setting. To activate and deactivate the function.
Full connection / No signal. To show the signal strength of the connection between the Food Sensor and the antenna.
1 Measurement point 2 Minimum level mark 3 Recommended immersion range (for
liquids) 4 Calibration code 5 Hook for placing the Food Sensor on the
rim 6 Handle with antenna inside

The Food Sensor is a wireless temperature probe operating without a battery, delivered in a packaging with the hob. Inside its handle there is an antenna. Another antenna is located below the hob surface, in the area between the two rear cooking zones. To ensure proper communication between the Food Sensor and the hob do not put anything on the hob in this area.

The measurement point is located halfway between the tip and the minimum level mark. Insert the Food Sensor in the food at least up to the minimum level mark. For liquids, to get the best cooking results, immerse the Food Sensor in the liquid 2-5 cm above the minimum level mark. Place the Food Sensor on the rim of the pot or pan by the hook;

ENGLISH 9

close to the area with the antenna, at 1 – 3 o’clock position (for the left side of the hob) or 9 – 11 o’clock position (for the right side of the
hob).
The following indicators show the strength of the connection between the hob and the Food Sensor on the display: , , . If the hob cannot establish the connection, comes on. You can move the Food Sensor along the rim of the pot to establish or strengthen the connection. The hob refreshes the connection status every 3 seconds.
For more information refer to “Hints and Tips for the Food Sensor”.
4.4 Key features of your hob
Your new SensePro® hob expertly guides you through the entire cooking session. Refer to the information below to discover several of its best features.
Depending on the kind of food, you can use Assisted Cooking with or without the Food Sensor. For various dishes you get different sets of functions.
Food Sensor – can be used in two ways. It measures the temperature in functions such as Thermometer and Pan Fry as well as helps you accurately maintain the temperature for different food types while cooking Sous Vide or using functions such as Poach, Simmer or Reheat.
Assisted Cooking – facilitates cooking by providing you with ready-made recipes for various dishes, pre-defined cooking parameters, and step-by-step instructions. You can use it with the Food Sensor, e.g. to prepare a steak, or without it, e.g. to prepare pancakes. The available options depend on the kind of dish you want to make. In this mode you can use functions such as Sous

Vide, Pan Fry, Simmer, Reheat, and many more. Pop-up windows and sounds inform you when the pre-defined temperature is reached. You can access Assisted Cooking from the Menu.
Sous Vide – a method of cooking vacuumpacked food in low temperature, for a prolonged period of time, which helps you save vitamins and maintain the flavour. Your hob provides you with clear settings and instructions to follow. Once you select the function via Assisted Cooking, the temperatures are defined for different food types. You can also choose your own temperatures if you activate the function via Sous Vide in the Menu.
Pan Fry – a frying method with automatically controlled heat levels, dedicated to various types of food. It helps you avoid overheating of food or oil. You can activate it by selecting Assisted Cooking from the Menu.
Thermometer – with this function the Food Sensor measures the temperature while cooking. You cannot use it when the Assisted Cooking function operates.
Other useful features of your hob:
Melting – this function is perfect for melting chocolate or butter.
PowerBoost – this function quickly boils large quantities of water.
Pause – this function lowers the heat setting to 1 for all cooking zones, enabling you to keep the food warm for a long time.
Bridge – this function allows you to combine both left side zones and use larger cookware. You can use it with Pan Fry.
Hob²Hood – this function connects the hob with a special hood and adjusts the fan speed accordingly.
Lock – this function temporarily disables the control panel during cooking.
Child Lock – this function disables the control panel while the hob does not operate, preventing accidental use.

10 ENGLISH

Stopwatch, Count Down Timer, and Minute Minder – are three functions that you can choose between to monitor the cooking time.

For more info, refer to “Daily use”.

5. BEFORE FIRST USE

WARNING! Refer to Safety chapters.
5.1 Using the display
· Only the backlit symbols can be used. · To activate a given option, touch the
relevant symbol on the display. · The selected function is activated when
you remove the finger from the display. · To scroll the available options, use a
quick gesture or drag your finger across the display. The speed of the gesture determines how fast the screen moves. · The scrolling can stop by itself or you can stop it immediately if you touch the display. · You can change most of the parameters shown on the display when you touch the relevant symbols. · To select the required function or time you can scroll through the list and / or touch the option you want to choose. · When the hob is activated and some of the symbols disappear from the display, touch it again. All the symbols come back on. · For certain functions, when you start them, a pop-up window with additional information appears. To deactivate the
pop-up window permanently, check before you activate the function. · Select a zone first to activate the timer functions.
Symbols useful for display navigation
To confirm the selection or setting.
To go back / forwards one level in the Menu.
To scroll up / down the instructions on the display.

Symbols useful for display navigation
To activate / deactivate the options.
To close the pop-up window.
To cancel a setting.
5.2 First connection to the mains
When you connect the hob to the mains you have to set Language, Display Brightness and Buzzer Volume.
You can change the setting in Menu > Settings > Setup. Refer to “Daily use”.
5.3 Food Sensor calibration
Before you start using the Food Sensor you need to calibrate it, to ensure that the temperature readings are correct.
Once the Food Sensor is calibrated properly, it measures the temperature at the boiling point with the tolerance range of + / – 2 °C.
Follow the procedure when:
· you install the hob for the first time; · you move the hob to a different location
(change of altitude); · you replace the Food Sensor.
Use a pot with the bottom diameter of 180 mm and fill it with 1 – 1,5 l of water. Do not put salt into the water, this may affect the procedure.
1. To calibrate or re-calibrate the function, put the Food Sensor on the rim of a pot. Fill the pot with cold water, at least up to the minimum level mark, and place it on the left front cooking zone.
2. Touch .

ENGLISH 11

Select Settings > Food Sensor > Calibration from the list. 3. Touch Calibrate. Follow the instructions on the screen.
To leave the Menu, touch or the right side of the display, outside of the pop- up window.
5.4 Food Sensor pairing
Originally, your hob is paired with the Food Sensor upon delivery.
If you replace the Food Sensor with a new one, you need to pair it with your hob.
1. Touch . Select Settings > Food Sensor > Pairing from the list. 2. Touch Forget to disconnect the previous
Food Sensor. 3. Touch Pair next to the cooking zone. A pop-up window appears.

4. Enter the five-digit code engraved on your new Food Sensor, using the number pad.
5. Touch OK to confirm. Your Food Sensor is now paired with the hob. Always calibrate the Food Sensor after pairing.
To leave the Menu, touch or the right side of the display, outside of the pop- up window.
5.5 Menu structure
Touch to access and change the settings of the hob or activate some functions.
To leave the Menu, touch or the right side of the display, outside of the pop- up window. To navigate through the Menu use or .
The table shows the basic Menu structure.

Assisted Cooking Hob Functions
Settings

Sous Vide Thermometer Melting Child Lock Stopwatch Hob²Hood Food Sensor
Setup
Service

DAILY USE

WARNING! Refer to Safety chapters.

Connection Calibration Pairing
Assisted Cooking Language Key Tones Buzzer Volume Display Brightness
Demo Mode License Show Software Version Alarm History Reset All Settings

12 ENGLISH

6.1 Activating and deactivating
Touch for 1 second to activate or deactivate the hob.
6.2 Automatic Switch Off
The function deactivates the hob automatically if:
· all cooking zones are deactivated, · you do not set the heat setting after you
activate the hob, · you spill or put something on the control
panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel. · the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down before you use the hob again. · you use incorrect cookware or there is no cookware on a given zone. The white cooking zone symbol blinks and the induction cooking zone deactivates automatically after 2 minutes. · you do not deactivate a cooking zone or change the heat setting. After some time a message comes on and the hob deactivates. The relation between the heat setting and the time after which the hob deactivates:

Heat setting
1 – 2 3 – 5 6 7 – 9

The hob deactivates after 6 hours
5 hours
4 hours
1.5 hour

When you use Pan Fry the hob deactivates after 1.5 hours. For Sous Vide the hob deactivates after 4 hours.

6.3 Using the cooking zones
Place the cookware in the centre of the selected cooking zone. Induction cooking zones adapt to the dimensions of the bottom of the cookware automatically.

Once you place a pot on the selected cooking zone the hob automatically detects it and the relevant slider appears on the display. The slider is visible for 8 seconds, after that time the display goes back to the main view. To close the slider faster tap the screen outside of the slider area.
When other zones are active the heat setting for the zone you want to use may be limited. Refer to “Power Management”.
Make sure that the pot is suitable for induction hobs. For more information on cookware types refer to “Hints and tips”. Check the size of the pot in “Technical data”.
6.4 Heat setting
1. Activate the hob. 2. Place the pot on the selected cooking
zone. The slider for the active cooking zone appears on the display and is active for 8 seconds. 3. Touch or slide your finger to set the
desired heat setting. The symbol turns red and becomes bigger.
You can also change the heat setting while cooking. Touch the zone selection symbol on the main view of the control panel and move you finger to the left or right (to lower or increase the heat setting).
6.5 PowerBoost
This function activates more power for the appropriate induction cooking zone; it depends on the cookware size. The function can be activated only for a limited period of time.
1. Touch the desired zone symbol first. 2. Touch or slide your finger to the right
to activate the function for the chosen cooking zone. The symbol turns red and becomes bigger.

ENGLISH 13

The function deactivates automatically. To deactivate the function manually select the zone and change its heat setting.
For maximum duration values, refer to “Technical data”.
6.6 OptiHeat Control(3 step Residual heat indicator)
WARNING! III / II / I As long as the indicator is on, there is a risk of burns from residual heat.
The induction cooking zones produce the heat necessary for the cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware.
The indicators III / II / I appear when a cooking zone is hot. They show the level of the residual heat for the cooking zones you are currently using.
The indicator may also appear: · for the neighbouring cooking zones even
if you are not using them, · when hot cookware is placed on a cold
cooking zone, · when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking zone has cooled down.
6.7 Timer
+STOP Count Down Timer
Use this function to specify how long a cooking zone should operate during a single cooking session.
You can set the function for each cooking zone separately.
1. Set the heat setting for the appropriate cooking zone first and then set the function.
2. Touch the zone symbol. 3. Touch . The timer menu window appears on the display.

4. Check to activate the function. The symbols change to +STOP . 5. Slide your finger to the left or right to
select the desired time (e.g. hours and/or minutes). 6. Touch OK to confirm your selection. You can also choose to cancel your selection. When the time comes to an end, a signal
sounds and blinks. Touch to stop the signal.
To deactivate the function set the heat
setting to 0. Alternatively, touch to the left of the timer value, touch next to it and confirm your choice when a pop-up window appears.
Minute Minder
You can use this function when the hob is activated but the cooking zones do not operate.
The function has no effect on the operation of the cooking zones.
1. Select any cooking zone. The relevant slider appears on the display.
2. Touch . The timer menu window appears on the display. 3. Slide your finger to the left or right to
select the desired time (e.g. hours and minutes). 4. Touch OK to confirm your selection. You can also choose to cancel your selection. When the time comes to an end, a signal
sounds and blinks. Touch to stop the signal.
To deactivate the function touch to the left
of the timer value, touch next to it and confirm your choice when a pop-up window appears.

14 ENGLISH

Stopwatch
The function automatically starts counting immediately after you activate a cooking zone. You can use this function to monitor how long it operates.
1. Touch to access the Menu. 2. Scroll the Menu to select Settings >
Stopwatch. 3. Touch the switch to turn the function on /
off. The function does not stop when you lift the pot. To reset the function and start it again
manually touch , select Reset from the pop-up window. The function starts counting from 0. To Pause the function for one
cooking session touch and select Pause from the pop-up window. Select Start to continue counting.

Bridge function
This function connects two cooking zones and they operate as one with the same heat setting.
You can use the function with large cookware.
1. Place the cookware on two cooking zones. The cookware must cover the centres of both zones.
2. Touch to activate the function. The zone symbol changes.
3. Set the heat setting. The cookware must cover the centres of both zones but not go beyond the area marking.

To deactivate the function, touch . The cooking zones operate independently.

Pause
This function sets all cooking zones that operate to the lowest heat setting.
You cannot activate the function when Assisted Cooking or Sous Vide is running.
When the function operates only and symbols can be used. All other symbols on the control panel are locked.
The function does not stop the timer functions.
Touch to activate the function.
comes on. The heat setting is lowered to 1.
To deactivate the function touch .
The function stops PowerBoost. The highest
heat setting reactivates when you touch again.

Lock
You can lock the control panel while the hob operates. It prevents an accidental change of the heat setting.
Set the heat setting first.

Touch to activate the function.
To deactivate the function, touch seconds.

for 3

When you deactivate the hob, you also deactivate this function.

Child Lock
This function prevents an accidental operation of the hob.

ENGLISH 15

1. Touch on the display to open the Menu.
2. Select Settings > Child Lock from the list. 3. Turn the switch on and touch the letters
A-O-X in the alphabetical order to activate the function. To deactivate the function turn the switch off.
To leave the Menu, touch or the right side of the display, outside of the pop- up window.
To navigate through the Menu, use or .
6.12 Assisted Cooking
This function adjusts the parameters to different types of food and maintains them throughout cooking.
With the function you can prepare a wide range of dishes, such as Meat, Fish & Seafood, Vegetables, Soups, Sauces, Pasta or Milk. There are different cooking methods available for different types of food, e.g. for chicken you can choose between Pan Fry, Sous Vide or Poach.
You can activate the function on the left side of the hob only. Assisted Cooking with the Sous Vide function can be activated for the left front or rear cooking zone. If you want to use Pan Fry it can be activated for the left front cooking zone or both cooking zones when bridged.
If Assisted Cooking runs on the left front cooking zone, use the zones on the right for cooking without the function.
Do not use cookware with the bottom diameter exceeding 200 mm on the left rear cooking zone when the function operates on the left front one. This may influence the connection between the Food Sensor and the antenna situated below the hob surface.
Do not heat cookware up before cooking. Use only cold tap water or liquids, if applicable. Reheat only cold dishes.
For Pan Fry follow the instructions on the display. Add oil once the pan is hot.

With Assisted Cooking the timer function works as Minute Minder. It does not stop the function when the set time runs out.
1. To activate the function, touch or and select Assisted Cooking.
2. Choose the type of food you would like to prepare from the list. For each type of food there are a few options available. Follow the instructions shown on the display. · You can touch OK on top of the popup window to use the default settings. · For Pan Fry, you can change the default heat level. For some dishes you can check the core temperature of the food if you use the Food Sensor. · For most of the options, e.g. Sous Vide and Poach, you can change the default temperature. · You can change the default time or set your own. Only for Sous Vide the minimum time is pre-defined.
Additional instructions with detailed information are available on the screen. You
can scroll them with and . 3. Touch OK. Follow the instructions in the
pop-up windows. Some of the options start with preheating. You can trace the progress on the control bar. 4. If a pop-up window appears with instructions, touch OK and then Start to continue. The function operates with the pre- defined settings. To deactivate the pop-up window
permanently, check before you activate the function. 5. Once the set time is up, an acoustic
signal sounds and a pop-up window appears. To close the window, touch OK. The function does not stop automatically. For Sous Vide the hob will automatically deactivate after a maximum of four hours.
To stop the function, touch or , or the symbol of the active zone, and select Stop. To confirm touch Yes in the pop-up window.

16 ENGLISH

6.13 Sous Vide
To prepare meat, fish or vegetables with the use of the function you need appropriate ziplock bags, or plastic bags and a vacuum sealer. Put seasoned food in bags and vacuum seal them. You can also buy portions of food ready to prepare with this cooking method.
WARNING! Make sure you obey food safety principles. Refer to “Hints and Tips”.
With this function you are free to choose your own time and temperature (between 35 and 85 °C), suitable for the kind of food you want to prepare. Use maximally 4 litres of water; cover the pot with a lid. For more details on cooking parameters, refer to the Cooking Guide table in “Hints and Tips”. Defrost food before preparing it.
The function can only be activated for the left front or left rear cooking zone. If Sous Vide runs, use the zones on the right for cooking without the function.
With Sous Vide the timer function works as Minute Minder. The function deactivates automatically only after a maximum of four hours.
1. Prepare portions of food according to the instructions above.
2. Place the pot filled with cold water on the left front or rear cooking zone.
3. Touch > Sous Vide. You can also
touch > Hob Functions > Sous Vide. 4. Select the right temperature. Set the time (optionally). The time of the cooking session depends on the thickness and type of food. 5. Touch OK to continue. 6. Place the Food Sensor on the rim of the
pot. 7. Touch OK to close the pop-up window. 8. Touch Start to activate preheating. Once the pot reaches the intended temperature, an acoustic signal sounds and a pop-up window appears. Touch OK to confirm.

9. Put portions of food in bags vertically into the pot (you may use a Sous Vide rack). Touch Start.
If you set the Minute Minder, it starts running along with the function. 10. Once the set time is up, an acoustic
signal sounds and blinks. To stop the
signal touch .
To stop or re-adjust the function, touch or the symbol of the active zone, and then Stop. To confirm, touch Yes in the pop-up window.

KeepTemperature
You can use the Sous Vide function for cooking while the Food Sensor accurately controls and maintains the temperature (with the accuracy of + / – 1 °C ). You can prepare a wide range of dishes such as spiced fonds or sauces (e.g. different types of curry or bouillabaisse). You can set your own parameters or refer to the Cooking Guide table in “Hints and Tips”.
The function can only be activated for the left front or left rear cooking zone.
1. Touch > Hob Functions > Sous Vide
or access the function by touching > Sous Vide. 2. Select the right temperature. Set the time (optionally). 3. Touch OK to continue. 4. Place the Food Sensor on the rim of the pot, or insert it in the food. 5. Touch Start to activate preheating. Once the pot reaches the intended temperature, an acoustic signal sounds and a pop-up window appears. 6. Touch OK to close the pop-up window. 7. Touch Start. If you set the Minute Minder, it starts running along with the function. 8. Once the set time is up, an acoustic
signal sounds and blinks. To stop the
signal touch .
To stop or re-adjust the function, touch or the symbol of the active zone, and then Stop. To confirm, touch Yes in the pop-up window.

ENGLISH 17

Thermometer
With this function the Food Sensor works as a thermometer, which helps you monitor the temperature of the food or liquid while cooking. For example, you can rely on it to heat up milk or check the temperature of baby food.
At least one cooking zone has to be active to use the function.
You can activate the function for all cooking zones but only for one cooking zone at a time.
1. Insert the Food Sensor inside the food or liquid up the minimum level mark.
2. Touch on the display to open the Food Sensor menu and choose
Thermometer. You can also touch > Hob Functions > Thermometer. 3. Touch Start. Measuring starts on the active cooking zone. If none of the cooking zones is active an info pop-up window appears. To stop the function, touch the digits
indicating the temperature or and select Stop.

Melting
You can use this function to melt different products, e.g. chocolate or butter. You can use the function only for one cooking zone at a time.
1. Touch on the display to open the Menu.
2. Select Hob Functions > Melting from the list.
3. Touch Start. You need to select the desired cooking zone. If the cooking zone is already active a pop-up window appears. Cancel the previous heat setting to activate the function.
To leave the Menu, touch or the right side of the display, outside of the pop- up window.
To navigate through the Menu, use or .
To stop the function, touch the zone selection symbol and then touch Stop.

6.16 Hob²Hood
It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infrared signal communicator. The speed of the fan is defined automatically on the basis of the mode setting and the temperature of the hottest pot on the hob.
For most of the hoods the remote system is originally deactivated. Activate it before you use the function. For more information refer to the hood user manual.
To operate the function automatically, set the automatic mode to H1 – H6. The hob is originally set to H5. The hood reacts whenever you operate the hob. The hob recognizes the temperature of the cookware automatically and adjusts the speed of the fan. You can set the hob to activate only the light by selecting H1.
If you change the fan speed on the hood, the default connection with the hob is deactivated. To reactivate the function, turn both appliances OFF and ON again.

Mode Auto- matic light

Boiling1)

Frying2)

H0

Off

Off

Off

H1

On

Off

Off

H23) On

Fan speed 1 Fan speed 1

H3

On

Off

Fan speed 1

H4

On

Fan speed 1 Fan speed 1

H5

On

Fan speed 1 Fan speed 2

H6

On

Fan speed 2 Fan speed 3

1. The hob detects the boiling process and acti- vates fan speed in accordance with the auto- matic mode. 2) The hob detects the frying process and acti- vates fan speed in accordance with the auto- matic mode. 3) This mode activates the fan and the light and does not rely on the temperature.

18 ENGLISH

Changing the modes
If you are not satisfied with the noise level / fan speed, you can switch between modes manually.
1. Touch . Select Settings > Hob²Hood from the list. 2. Choose the appropriate mode. To leave the Menu touch or the right side of the display, outside of the pop-up window.
When you finish cooking and deactivate the hob, the hood fan may still operate for a certain period of time. After that time the system deactivates the fan automatically and prevents you from an accidental activation for the next 30 seconds.
The light on the hood deactivates 2 minutes after deactivating the hob.

Language
1. Touch on the display to open the Menu.
2. Select Settings > Setup > Language from the list.
3. Choose the appropriate language from the list.
If you chose the wrong language, touch . A list appears. Select the third option from the top, then the last but one option. Next, select the second option. Scroll down to choose the appropriate language from the list. Finally, choose the option on the right.
To leave the Menu, touch or the right side of the display, outside of the pop- up window.
To navigate through the Menu, use or .
6.18 Key Tones / Buzzer Volume
You can choose the type of sound your hob emits or turn the sounds off entirely. You can choose between the click (default) or beep.
1. Touch on the display to open the Menu.
2. Select Settings > Setup > Key Tones / Buzzer Volume from the list.
3. Choose the appropriate option.

To leave the Menu, touch or the right side of the display, outside of the pop- up window.
To navigate through the Menu, use or .
6.19 Display Brightness
You can change the brightness of the display.
There are 4 brightness levels, 1 is the lowest and 4 is the highest.
1. Touch on the display to open the Menu.
2. Select Settings > Setup > Display Brightness from the list.
3. Choose the appropriate level.
To leave the Menu, touch or the right side of the display, outside of the pop- up window.
To navigate through the Menu, use or .
6.20 Power Management
If multiple zones are active and the consumed power exceeds the limitation of the power supply, this function divides the available power between all cooking zones. The hob controls heat settings to protect the fuses of the house installation.
· Cooking zones are grouped according to the location and number of the phases in the hob. Each phase has a maximum electricity loading of 3680 W. If the hob reaches the limit of maximum available power within one phase, the power of the cooking zones will be automatically reduced.
· The maximum heat setting is visible on the slider. Only the digits in white are active.
· If a higher heat setting is not available reduce it for the other cooking zones first.
Refer to the illustration for possible combinations in which power can be distributed among the cooking zones.

ENGLISH 19

HINTS AND TIPS

WARNING! Refer to Safety chapters.

Cookware
For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly.
Use the induction cooking zones with suitable cookware.
· The bottom of the cookware must be as thick and flat as possible.
· Ensure pan bases are clean and dry before placing on the hob surface.
· In order to avoid scratches, do not slide or rub the pot across the ceramic glass.
Cookware material
· correct: cast iron, steel, enamelled steel, stainless steel, multi-layer bottom (with a correct marking from a manufacturer).
· not correct: aluminium, copper, brass, glass, ceramic, porcelain.
Cookware is suitable for an induction hob if:
· water boils very quickly on a zone set to the highest heat setting.
· a magnet pulls on to the bottom of the cookware.
Cookware dimensions
· Induction cooking zones adapt to the dimension of the bottom of the cookware automatically.

· The cooking zone efficiency is related to the diameter of the cookware. The cookware with a diameter smaller than the minimum receives only a part of the power generated by the cooking zone.
· For both safety reasons and optimal cooking results, do not use cookware larger than indicated in “Cooking zones specification”. Avoid keeping cookware close to the control panel during the cooking session. This might impact the functioning of the control panel or accidentally activate hob functions. Refer to “Technical data”.
7.2 Correct pans for Pan Fry function
Use only pans with flat bottom. To check if the pan is correct: 1. Put your pan upside down. 2. Put a ruler on the bottom of the pan. 3. Try to put a coin of 1, 2 or 5 Euro Cent
(or with similar thickness) between the ruler and the bottom of the pan.
a. The pan is incorrect if you can put the coin between the ruler and the pan.

20 ENGLISH

b. The pan is correct if you cannot put the coin between the ruler and the pan.
7.3 The noises during operation
If you can hear: · crack noise: cookware is made of different
materials (a sandwich construction). · whistle sound: you use a cooking zone
with a high power level and the cookware is made of different materials (a sandwich construction).

· humming: you use a high power level. · clicking: electric switching occurs, the pot
is detected after you place it on the hob. · hissing, buzzing: the fan operates. The noises are normal and do not indicate any malfunction.
7.4 Öko Timer (Eco Timer)
To save energy, the heater of the cooking zone deactivates before the count down timer sounds. The difference in the operation time depends on the heat setting level and the length of the cooking operation.
7.5 Examples of cooking applications
The correlation between the heat setting of a zone and its consumption of power is not linear. When you increase the heat setting, it is not proportional to the increase of the consumption of power. It means that a cooking zone with the medium heat setting uses less than a half of its power.
The data in the table is for guidance only.

Heat setting 1 1 – 2 1 – 2 2 – 3
3 – 4 4 – 5 4 – 5 6 – 7

Use to:

Time (min)

Hints

Keep cooked food warm.

as neces- Put a lid on the cookware. sary

Hollandaise sauce, melt: butter, choco- 5 – 25 late, gelatine.

Mix from time to time.

Solidify: fluffy omelettes, baked eggs. 10 – 40

Cook with a lid on.

Simmer rice and milkbased dishes, heat up ready-cooked meals.

25 – 50

Add at least twice as much liquid as rice, mix milk dishes halfway through the procedure.

Steam vegetables, fish, meat.

20 – 45

Add a couple of tablespoons of liquid.

Steam potatoes.

20 – 60

Use max. ¼ l of water for 750 g of po- tatoes.

Cook larger quantities of food, stews and soups.

60 – 150

Up to 3 l of liquid plus ingredients.

Gentle fry: escalope, veal cordon bleu, as neces- Turn halfway through. cutlets, rissoles, sausages, liver, roux, sary eggs, pancakes, doughnuts.

ENGLISH 21

Heat setting 7 – 8 9

Use to:

Time (min)

Hints

Heavy fry, hash browns, loin steaks, steaks.

5 – 15

Turn halfway through.

Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

Boil large quantities of water. PowerBoost is activated.

7.6 Hints and Tips for the Food Sensor
For functions such as Assisted Cooking and Sous Vide, you can use the Food Sensor on the left side of the hob only. With the Thermometer function you can use the Food Sensor also on the right side of the hob.
To ensure strong connection ( , ) between the Food Sensor and the hob:
For liquids
· Immerse the Food Sensor in the liquid, within the recommended immersion range. The minimum level mark has to be covered.
· Place the Food Sensor on the rim of the pot. If possible, keep it in the vertical position. Make sure its tip comes into contact with the bottom of the pot. The handle of the Food Sensor should always be outside of the pot or pan.

· If you want to use the Food Sensor on the left side of the hob, ensure that it is near the centre of the hob, at 1 – 3 o’clock position. If you want to use it on the right (with the Thermometer function), make sure it is placed at 9 – 11 o’clock position. Refer to the illustrations below.

22 ENGLISH

You can move the Food Sensor along the rim of the pot if the connection fails to establish. · You can partially cover the pot with a lid.

· If you use the left front cooking zone, do not place any large pots on the left rear one. Large pots on the left rear cooking zone may block the signal. Move the large pot to the right rear cooking zone.

For solid foods (core temperature measurement) · Insert the Food Sensor across the thickest
part of the food, up to the minimum level mark. The measurement point should be in the central part of the portion.
· Make sure the Food Sensor is firmly inserted in the food. The metal parts of the Food Sensor should not touch the walls of the pot / pan. The hook of the handle has to point downwards.
· For meat / fish with a thickness of 2 – 3 cm, the tip of the Food Sensor should reach the bottom of the pan.
· Remove the Food Sensor before turning the food over.
· When using a plancha, make sure the handle of the Food Sensor stays on the right side, outside of its surface. Refer to the illustrations below.

7.7 Cooking at low temperatures Food safety principles
Make sure you comply with the following instructions when cooking at low temperatures, e.g. Sous Vide.
· Wash / disinfect your hands before preparing food. Use disposable gloves.
· Use only high quality fresh food, stored in appropriate conditions.
· Always wash and peel fruits and vegetables thoroughly.
· Keep your worktop surface and cutting boards clean. Use different cutting boards for different types of food.
· Pay special attention to food hygiene when preparing poultry, eggs, and fish. Poultry should always be prepared at the temperature of at least 65 °C for a minimum of 50 minutes.
· Make sure the fish you want to prepare with the use of Sous Vide have the sashimi quality, i.e. it is extra fresh.
· Store the prepared food in a refrigerator for a maximum of 24 hours.
· For people with a weakened immune system or chronic health conditions it is advisable to pasteurise food before consuming it. Pasteurise the food at 60 °C for a minimum of one hour.
7.8 Cooking Guide
The table below shows examples of food types and provides you with the optimal temperatures and suggested cooking times. The parameters may vary depending on the temperature, quality, consistency, and quantity of food.
The length of the cooking time depends more on the thickness of the food than on its weight. E.g. for steak, the thicker the piece, the more time it takes for its core to reach the pre-defined temperature. A 2 cm-thick steak

ENGLISH 23

requires around one hour to reach 58 °C, while a 5 cm-thick one needs around four hours.
Monitor the first cooking session to ensure the parameters below suit your cooking

habits and cookware. You can change these parameters depending on your personal preferences.

Food type

Cooking method

Beef – steak

Sous Vide

Chicken breast
Chicken – leg Pork – steak Pork – tender- loin Lamb fillet

Sous Vide Poach Poach Sous Vide Sous Vide
Sous Vide

Saddle of lamb Sous Vide (without bones)

Salmon

Sous Vide

Poach

Tuna Shrimps

Sous Vide Sous Vide

Preparation level rare
medium
done
well-done well-done well-done well-done well-done

Thickness / amount of food 2 cm 4 cm 6 cm 2 cm 4 cm 6 cm 2 cm 4 cm 6 cm 200 – 300 g
200 – 300 g 2 cm 4 – 5 cm

Core temp / cooking temp (°C) 50 – 54
55 – 60
61 – 68
64 – 72 68 – 74 78 – 85 60 – 66 62 – 66

Cooking time (min)
45 – 210 120 – 210 180 – 210 45 – 240 120 – 240 180 – 240 45 – 240 120 – 240 180 – 240 45- 60 35 – 45 30 – 60 35 – 60 60 – 120

medium well-done medium well-done translucent
translucent
translucent translucent

2 cm
200 – 300 g
2 cm 3 cm 2 cm 3 cm 2 cm 1 – 2 cm

56 – 60 64 – 68 56 – 60 64 – 68 46 – 52 46 – 52 55 – 68 55 – 68 45 – 50 50 – 56

35 – 60 40 – 65 60 – 120 65 – 120 20 – 45 35 – 50 20 – 35 25 – 45 35 – 50 25 – 45

24 ENGLISH

Food type

Cooking method

Preparation level

Thickness / amount of food

Core temp / cooking temp (°C)

Cooking time (min)

Eggs

Sous Vide

soft1)

M – size

63 – 64

45 – 70

medium1)

65 – 67

45 – 70

hard1)

68 – 70

45 – 70

Boiling

soft

boiling

medium

boiling

7 2)

hard

boiling

10 2)

Rice

Swelling

cooked

–

–

10 – 30

Potatoes

Boiling

cooked

–

–

15 – 30

Vegetables

Sous Vide

cooked

–

(fresh)

85

30 – 40

Asparagus

Sous Vide

cooked

–

85

30 – 40

1. The egg white stays liquid. 2) The times are for medium-sized eggs. For large eggs and eggs from the fridge add one minute to the cooking time.

Additional tips for Assisted Cooking:
· Fill the pot with a suitable amount of liquid (i.e. between 1 – 3 litres) before cooking. Try to avoid adding more while cooking.
· Use a lid to save energy and reach the temperature faster (also for preheating water).
· Stir your dish regularly throughout the cooking process to ensure a uniform temperature distribution.
· Add salt at the very beginning of a cooking session.
· Defrost food before preparing it. · Add vegetables (e.g. broccoli, cauliflower,
green beans, Brussels sprouts) when the water reaches the intended temperature and the pop-up window appears. · Add potatoes or rice to cold water before you start the function. · For stews, sauces, soups, curries, ragout, goulash, and broths you can use Reheat or Simmer. Before you start the Simmer function, fry the ingredients (without the Food Sensor) and add cold liquid; next, activate the function from Assisted Cooking.

· For small seafood, e.g. octopus slices / tentacles or shellfish you can use Pan Fry.
Additional tips for Pan Fry:
WARNING! Use only pans with flat bottoms.
CAUTION! Use laminated pans only with low heat setting levels, to prevent overheating and damage of the cookware.
· Start the function when the hob is cold (no preheating is necessary).
· Use sandwich bottom cookware made of stainless steel.
· Do not use cookware with an embossment in the centre of the bottom.
· Different sizes of pans can cause different heat up times. Heavy pans store more heat than the lighter ones and take more time to heat up.
· Turn the food over once it reaches a half of the desired temperature.

ENGLISH 25

Very thick portions of food should be turned over more often (i.e. once every two minutes). We recommend you use the Sous Vide method first, to get best results. To add a finishing touch, put the prepared portions on a pre-heated pan and roast them quickly on both sides. · Always remove the Food Sensor before turning the food over.
7.9 Hints and Tips for Hob²Hood
When you operate the hob with the function:
· Protect the hood panel from direct sunlight.
· Do not spot halogen light on the hood panel.
· Do not cover the hob control panel. · Do not interrupt the signal between the
hob and the hood (e.g. with the hand, a cookware handle or a tall pot). See the picture. The hood in the picture is only exemplary.

Keep the window of the Hob²Hood infrared signal communicator clean.
Other remotely controlled appliances may block the signal. Do not use any such appliances near to the hob while Hob²Hood is on.
Cooker hoods with the Hob²Hood function To find the full range of cooker hoods which work with this function refer to our consumer website. The AEG cooker hoods that work
with this function must have the symbol .

CARE AND CLEANING
WARNING! Refer to Safety chapters.
8.1 General information
· Clean the hob after each use. · Always use cookware with a clean base. · Scratches or dark stains on the surface
have no effect on how the hob operates.

· Use a special cleaner suitable for the surface of the hob.
· Use a special scraper for the glass.
8.2 Cleaning the hob
· Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns. Use a special hob scraper on the glass surface

26 ENGLISH

at an acute angle and move the blade on the surface. · Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and a nonabrasive detergent. After cleaning, wipe the hob dry with a soft cloth. · Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a cloth.

· The surface of the hob has horizontal grooves. Clean the hob with a moist cloth and some detergent with smooth movement from left to right. After cleaning, wipe the hob dry with a soft cloth from left to right.

9. TROUBLESHOOTING
WARNING! Refer to Safety chapters.
9.1 What to do if…

Problem

Possible cause

Remedy

You cannot activate or operate the hob.

The hob is not connected to an elec- Check if the hob is correctly connec-

trical supply or it is connected incor- ted to the electrical supply. Refer to

rectly.

the connection diagram.

The fuse is blown.

Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician.

You do not set the heat setting for 60 seconds.

Activate the hob again and set the heat setting in less than 60 seconds.

You touched 2 or more sensor fields Touch only one sensor field. at the same time.

Pause operates.

Refer to “Daily use”.

The display does not react to the touch.

Part of the display is covered or the pots are placed too near to the dis- play. There is some liquid or an object on the display.

Remove the objects. Move the pots away from the display. Clean the display, wait until the ap- pliance is cold. Disconnect the hob from the electrical supply. After 1 min, connect the hob again.

An acoustic signal sounds and the hob deactivates. An acoustic signal sounds when the hob is deactivated.

You put something on one or more sensor fields.

Remove the object from the sensor fields.

The hob deactivates.

You put something on the sensor field .

Remove the object from the sensor field.

ENGLISH 27

Problem

Possible cause

Remedy

Residual heat indicator does not come on.

The zone is not hot because it oper- ated only for a short time or the sen- sor under the hob surface is dam- aged.

If the zone operated sufficiently long to be hot, speak to an Authorised Service Centre.

After you activate Assisted Cooking, This is a safety check to ensure that

the hob starts heating up, stops, and the Food Sensor is in a pot for

then starts again.

which Assisted Cooking function

was activated.

It is a normal procedure, it does not indicate any malfunction.

You cannot activate the highest heat Another zone is already set to the

setting.

highest heat setting.

First reduce the power of the other zone.

The sensor fields become hot.

The cookware is too large or you put Put large cookware on the rear

it too near to the controls.

zones, if possible.

The display shows that the Food Sensor is not found.

The position of the Food Sensor is incorrect. Something blocks its signal (e.g. cutlery, a pan handle or another pot).

Position the Food Sensor correctly. Refer to “Hints and tips”. Remove any metal objects or other objects that may block the signal.

The display shows the temperature of water is higher than 100°C.

You did not calibrate the Food Sen- sor or you did it incorrectly. You moved the hob to a different lo- cation.

Calibrate the Food Sensor again. Refer to “Calibrating”. You may also need to check if the calibration code is correct. Refer to “Pairing”.

You put too much salt in the water. Do not salt boiling water.

Temperature is not visible on the display. The display shows a warning icon.

The Food Sensor did not establish connection with the hob because the strength of the signal is too low.

Place the Food Sensor close to the antenna on the hob surface, near the centre of the hob. Refer to “Hints and tips”.

Something covers the Food Sensor or the antenna on the hob surface, e.g. a piece of metal cutlery.

Remove anything that covers the antenna. Make sure you place cook- ware in the centre of the cooking zone. Refer to “Hints and tips”.

The connection between the Food Sensor and the antenna was lost.

Make sure nothing covers the sig- nal. Move the Food Sensor along the rim of the pot to adjust its posi- tion. Refer to “Hints and tips”.

Other appliances work at the same frequency and disturb the connec- tion.

Remove any appliances that may disturb the connection. Refer to “Technical Data”.

Temperature of the food is different The Food Sensor is inserted incor-

than expected.

rectly.

Make sure the measurement point is situated in the thickest part of the food. Refer to “Hints and tips”.

The hob detects significant tempera- You added some water or changed Avoid adding water or changing the

ture jumps.

the pot while cooking.

pot after a function starts.

The heat in the pot did not spread evenly, especially for thick liquids.

Stir the food frequently.

The pot gets too hot or the food is overdone too quickly.

You used a pot which is too small.

Use pots whose sizes are appropri- ate for a given cooking zone. Refer to “Technical data”.

28 ENGLISH

Problem You cannot activate a function.
Assisted Cooking or Sous Vide stops.
Hob²Hood does not work. Hob²Hood operates, but only the light is on. Hob²Hood modes H1 – H6 operate, but the light is off. There is no sound when you touch the panel sensor fields. Wrong language is set.
A cooking zone deactivates. A warning message saying the cooking zone is going to switch off comes on.
and a message come on. O – X – A appears.
blinks.
and a number come on.
You can hear a constant beep noise. Cookware heats up longer than 5 min.

Possible cause

Remedy

Another function is running on the Stop the function before you acti- same cooking zone, which prevents vate another. the activation.

At the beginning of a cooking ses- sion the temperature of the liquid in- side the pot is higher than 40 °C. The cookware in use is hot.

Use only cold liquids. Do not preheat the cookware.

You covered the control panel.

Remove the object from the control panel.

You activated the H1 mode.

Change the mode to H2 – H6 or wait until the automatic mode starts.

There might be a problem with the Contact an Authorised Service Cen-

light bulb.

tre.

The sounds are deactivated.

Activate the sounds. Refer to “Daily use”.

You changed the language by mis- take.

Reset all functions to the factory set- tings. Select Reset All Settings from the Menu. Disconnect the hob from the electri- cal supply. After 1 min, connect the hob again. Set Language, Display Brightness and Buzzer Volume.

Automatic Switch Off deactivates the cooking zone.

Deactivate the hob and activate it again. Refer to “Daily use”.

Lock operates.

Refer to “Daily use”.

Child Lock operates. There is no cookware on the zone.

Refer to “Daily use”. Put cookware on the zone.

The cookware is unsuitable. The diameter of the bottom of the cookware is too small for the zone. There is an error in the hob.
The electrical connection is incor- rect. The bottom of the cookware is not induction compatible.

Use suitable cookware. Refer to “Hints and tips”.
Use cookware with correct dimen- sions. Refer to “Technical data”.
Deactivate the hob and activate it
again after 30 seconds. If comes on again, disconnect the hob from the electrical supply. After 30 sec- onds, connect the hob again. If the problem continues, speak to an Au- thorised Service Centre.
Disconnect the hob from the electri- cal supply. Ask a qualified electri- cian to check the installation.
Use cookware with correct (flat, magnetic) bottom. Refer to “Hints and tips”.

ENGLISH 29

9.2 If you cannot find a solution…
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Make sure, you operated the hob correctly. If not the

TECHNICAL DATA

Rating plate

servicing by a service technician or dealer will not be free of charge, also during the warranty period. The information about guarantee period and Authorised Service Centres are in the guarantee booklet.

Model IAE84881FB Typ 62 D4A 01 CA Induction 7.35 kW Ser.Nr. …………….. AEG
10.2 Software Licences
The software included in the hob contains copyrighted software that is licensed under the BSD, fontconfig, FTL, GPL-2.0, LGPL-2.0, LGPL-2.1, libJpeg, zLib/ libpng, MIT, OpenSSL / SSLEAY ISC, Apache 2.0 and others.
10.3 Cooking zones specification

PNC 949 597 523 01 220 – 240 V / 400 V 2N 50 – 60 Hz Made in: Germany 7.35 kW
Check the full copy of the licence in: Menu > Settings > Service > License. You can download the source code of the open source software by following the hyperlink present in the web product page.

Cooking zone
Left front Left rear Middle front Right rear

Nominal power (maximum heat setting) [W] 2300
2300
1400
2300

PowerBoost [W] PowerBoost maximum dura- tion [min]

3200

10

3200

10

2500

4

3600

10

Cookware diame- ter [mm] 125 – 210 125 – 210 125 – 145 205 – 240

The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware.
For optimal cooking results use cookware no larger than the diameter in the table.

10.4 Food Sensor technical specifications
Food Sensor is approved for use in contact with food.

Working frequency
Maximum sending power Temperature range

433,05 – 434,73 MHz
5 dBm
0 – 120°C

30 ENGLISH

Measurement cycle

3 seconds

ENERGY EFFICIENCY

Product Information Sheet according to UK Ecodesign Regulation

Model identification Type of hob Number of cooking zones Heating technology Diameter of circular cooking zones (Ø)
Energy consumption per cooking zone (EC electric cooking)
Energy consumption of the hob (EC electric hob)
BS EN 60350-2 – Household electric cooking appliances – Part 2: Hobs – Methods for measuring performance. The energy measurements referring to the cooking area are identified by the markings of the respective cooking zones.
11.2 Energy saving
You can save energy during everyday cooking if you follow below hints. · When you heat up water, use only the
amount you need.

Left front Left rear Middle front Right rear
Left front Left rear Middle front Right rear

IAE84881FB
Built-In Hob
4
Induction
21.0 cm 21.0 cm 14.5 cm 24.0 cm
179.6 Wh / kg 189.1 Wh / kg 180.2 Wh / kg 185.2 Wh / kg
183.5 Wh / kg

· If it is possible, always put the lids on the cookware.
· Before you activate the cooking zone put the cookware on it.
· Put the smaller cookware on the smaller cooking zones.
· Put the cookware directly in the centre of the cooking zone.
· Use the residual heat to keep the food warm or to melt it.

1ENVIRONMENTAL CONCERNS

Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of

appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

ENGLISH 31

www.aeg.com/shop

867372200-B-022022

References

• AEG - aeg.com
• Welcome to AEG
• Welcome to AEG

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>