CHARGE AMPS Aura 131293 Dual Electric Vehicle Charger User Guide
- October 30, 2023
- CHARGE AMPS
Table of Contents
CHARGE AMPS Aura 131293 Dual Electric Vehicle Charger
Charge Amps Aura
Support
If you need service or repair, start by contacting the supplier from whom you purchased the product.
| Recycle as electrical waste|
| Charge Amps Aura Statement of Compliance to the
Electric Vehicle (Smart Charge Points) Regulations 2021
---|---|---|---
Fuuse Driver App
Charge Amps Aura is managed via the Fuuse Charge Point Management Platform.
Please download the Fuuse Driver App to manage your charging sessions.
Fuuse Charge Point Managment Platform
Please create an account in the Fuuse Charge Point Management Platform to configure, control and manage the installation of Charge Amps Aura.
| 
---|---
Full product information
Visit www.chargeamps.com for Charge Amps Aura Installation Manual, Charge Amps Aura User Manual and other product documentation.
| 
---|---
https://www.chargeamps.com/product/charge-amps-aura/
| 
---|---
https://www.chargeamps.com/app/uploads/2023/05/Technical-file-ChargerAmps-
Aura-The-Electric-Vehicles-Smart-Charge-Points-Regulations-2021.pdf
Safety
WARNING! Read all instructions before use.
-
Charge Amps Aura complies with the device-level requirements set out under the Electric Vehicles (Smart Charge Point) Regulations 2021, as detailed in the technical file, which is available online.
-
Installers must adhere to the instructions stated in the Installation Manual regarding installation and configuration of the charger to ensure compliance with the Electric Vehicle (Smart Charge Point) Regulations 2021.
-
It is the responsibility of the installer to provide proof of compliance to the Electric Vehicle (Smart Charge Point) Regulations 2021 of the complete charge point installation.
Improper use may create a risk of personal injury. -
The product must only be installed by a qualified electrician in accordance with the Installation Manual.
-
National usage requirements and restrictions apply.
-
Only use this product for charging compatible electric vehicles.
-
Never use an adapter between the EV socket-outlet and the charging cable.
-
Cord extension sets are not allowed to be used.
-
Inspect the product for visible damage before use.
-
Never attempt to repair or use the product if it is damaged.
-
Do not immerse the product in water, subject it to physical abuse or insert foreign objects in any part of the product
-
Never attempt to disassemble the product in any way.
-
The owner is responsible for informing users of the compatibility of any charging point.
Neglecting to follow and carry out the above mentioned directions,
instructions and safety precautions implies that any warranty provisions will
be cancelled and that Charge Amps can reject any and all claims for
compensation in connection with any injuries/damage or incidents – direct or
indirect – that are a result of such negligence.
Hereby, Charge Amps AB declares that the radio equipment type Charge Amps Aura
is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.chargeamps.com/product/charge-amps-aura/ © Copyright Charge Amps
AB. All rights reserved. Copying, amending and translating are strictly
forbidden without prior written approval from Charge Amps AB.
Technical data
| Charging mode | Mode 3 |
|---|---|
| EV power supply identifier | |
| Metering | 1 to 3 phase voltage, current and power |
| Socket | Type 2, up to 2×22 kW |
| Rated voltage (Un) | 230/400 V |
| Rated insulation voltage (Ui) | 250/400 V |
| Rated impulse withstand voltage (Uimp) | 4 kV |
| Rated frequency (fn) | 50 Hz |
| Rated current (In) | 63 A |
| Rated diversity factor (RDF) | 1 (can be lowered if used together with load |
balancing functionality)
Dimensions (W x D x H)| 367 x 159 x 405 mm
Characteristics of power supply and output| AC EV supply equipment connected
to AC supply network, permanently connected.
Assembly type| AECVS
RFID| T ype: ISO/IEC 14443 Typ A 13.56MHz Mifare Range: 13.553 –
13.567 MHz Output: 31 dBm
Wi-Fi| Type: 802.11 b/g/n
Range : 2400-2500 MHz Max
output: 20/17/14 dBm@802.11 b/g/n
Cellular networks communication (only applies to 131293).| Type: GSM,
GPRS, EDGE, UMTS/ HSPA+, LTE
Range: 698 – 960 / 1710 – 2690 MHz Max.
output: 33 dBm@GSM, 24 dBm@ WCDMA, 23 dBm@LTE
SIM Card: Standard SIM (25 mm x 15 mm)
Start/Stop Charging
Start
Connect the vehicle connector to the vehicle inlet of the car. Lift the EV
socket-outlet cover and connect the EV plug to the EV socket-outlet.
If RFID authentication is enabled, briefly hold the RFID tag in front of the
RFID reader to initiate charging.
Stop
Disconnect the vehicle connector from the vehicle inlet of the car and
disconnect the EV plug from the EV socket-outlet.
If RFID authentication was used to start charging, hold the RFID tag in front
of the RFID reader to stop the charging and unlock the cable. plug from the EV
socket.
Model overview and status indications
Ⓐ RFID reader
Ⓑ EV socket-outlet
Ⓒ Socket light
| Status indications | Socket light |
|---|---|
| Ready for charging | Green light |
| Charging | Blue light |
| Charging complete | Yellow light |
| Error * | Red light |
www.chargeamps.com
Charge Amps AB (publ)
Frösundaleden 2B, 8th floor
SE–169 75 Solna, Sweden
Charge Amps UK Ltd
4th Floor, 3 More London Riverside
London SE1 2AQ, United Kingdom
Doc. Nr: 131341
Rev: 01
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>