smartmi 1S Smart Convector Heater User Guide

smartmi 1S Smart Convector Heater

Safety Instructions

Read this manual carefully before use, and retain it for future reference.

• This heater is intended for indoor use only. During use, stably place the heater on a level surface, and do not tilt or tip it over. Make sure the feet are correctly installed before using the heater.
• Please plug the heater into a 230V AC power outlet.
• The used power outlet must be grounded and have a rated current of at least 10 A so as to avoid accidents.
• Do not cover the heater or its power cord so as to avoid overheating.
• Do not touch the heater with wet hands.
• During or right after its use, do not touch the heater so as to avoid getting scalded. To prevent the risk of overheating or fire, never use an extension cord.
• Only use the heater in a well-ventilated environment.
• Do not insert foreign objects into the air inlets and outlets of the heater.
• Do not insert any wires or other foreign objects into any opening of the heater so as to avoid electric shocks.
• Do not place or use the heater in garages or workshops, nor near gasoline, paint, or other flammable and explosive materials.
• Do not use the heater if its power cord or the power plug is damaged or broken.
• In case any damages occur, it must be replaced with a genuine one from the manufacturer or the after-sales service department to avoid safety hazards.
• Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
• Do not use this heater if it has been dropped.
• Do not use if there are visible signs of damage to the heater.
• Do not place the heater directly in a bathtub or other water container.
• Do not place the heater directly below the socket outlet.
• This is a high-power heating product. Check whether the plug properly fits into the power outlet when using this heater for the first time.
• Checking method: Insert the power plug into the power outlet, then select the highest constant temperature. Turn off and unplug the heater after about 30 minutes to check whether the prongs of the power plug are too hot (temperatures in excess of 55°C). If so, try a different power outlet so as to avoid the risk of a molten power plug or fire due to overheating.
• During using this heater, do not share the same electrical circuit with other devices to avoid overloading the circuit.
• If the heater is not going to be used for an extended period of time, please turn off the on/off switch and unplug the power cord. If the heater stops functioning, contact the after-sales service department. Never attempt to disassemble the heater by yourself.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance. Children of less than 3 years should be kept away unless continuously supervised.
• Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
• Cleaning and user maintenance shall not be made by children without supervision.

CAUTION
Some parts of this product can become very hot and cause burns.
Particular a ention has to be given where children and vulnerable people are present.

Warning

• Do not immerse the heater in water.
• Do not pour water into the heater.
• Do not wipe the heater with any detergent.
• To prevent overheating, do not cover the heater.
• Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
• To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 m from the air outlet.

Product Overview

Mechanical switch and touch screen

Installation

Quick installation
Unpack the product and install the support feet. The heater is ready to be used.

Use

Turning on/off the heater
Turn on the mechanical switch, and press the “On/Off” button. Short press to turn on the heater, and long press to turn it off. If the heater is not used for a long time, please turn off the mechanical switch and unplug it from the socket.

Setting temperature
Press the button to adjust the temperature within the range of 16°C to 28°C. When the heater is turned on for the first time, its temperature is set to 24°C by default. The last setting will be recalled when you turn it on subsequently.

Scheduled off
Press the  button to set the duration to 0, 1h, 2h, 4h, 6h, or 8h. After setting the timer, the “Clock” icon will blink.

Adjusting brightness
Short press the “Brightness setting/Wi-Fi reset” button to adjust the brightness of the buttons and display areas.

Wi-Fi resetting
Press and hold the “Brightness setting/Wi-Fi reset” button for more than 5 seconds. The Wi-Fi indicator on the heater blinks, indicating that Wi-Fi is waiting for connection and has been reset successfully.

Quick setting

This product works with “Mi Home / Xiaomi Home”. It can be controlled via the “Mi Home / Xiaomi Home” app or Mi AI. It can also interconnect or interoperate with other products.
Scan the QR code to download and install the “Mi Home / Xiaomi Home” app. Users who have already installed the app can go directly to the device connection page. Or search “Mi Home / Xiaomi Home” in the app store to download and install the app. Open the “Mi Home / Xiaomi Home” app and tap “+” in the upper-right corner of the home page to add a device following the instructions.
Note: The actual operation may vary due to upgrades and updates to the “Mi Home / Xiaomi Home” app. Please follow the current instructions provided within the app.

Maintenance and care

• Before cleaning the heater, please make sure to unplug it and wait for it to cool down.
• Wipe the outer surface of the heater gently with a wet cloth and do not use it again until it gets completely dry.

Specifications

/g/n 2.4GHz

| Protection rating| IPX4
RF Specification:

Wi-Fi 2.4G (2400 – 2483.5 MHz), Max. RF Output Power: <20 dBm

Under normal use of condition ,this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.

Regulatory Compliance Information

Europe — EU declaration of conformity
Hereby, Beijing Smartmi Electronic Technology Co.,Ltd. declares that the radio equipment type DNQZNB05ZM is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://smartmi.com.cn/doc.html

Disposal and recycling information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Manufacturer: Beijing Smartmi Electronic Technology Co., Ltd. Address: Room 201-203, Unit 6, Building A, No. 66, Zhufang Road, Qinghe, Haidian District, Beijing

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>