Hunter Yuma 52 Inch Ceiling Fan Installation Guide
- July 30, 2024
- Hunter
Table of Contents
Hunter Yuma 52 Inch Ceiling Fan
Yuma
Installation Manual
Model: 51451 Terracotta
51452 Matte Black
51453 Dove Grey
Fan weight ±2 lbs: 23.6 lbs Q!).7 kg
Congratulations on purchasing your new Hunter® ceiling fan!
The ceiling fan you purchased will provide comfort and performance in your home or office for many years. This instruction manual contains complete instructions for installing and operating your fan. We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.
We are here to help!
This Instruction Manual is designed to make installation as simple as
possible. While working through this Instruction Manual, keep your smartphone
or tablet nearby. We have added video links to help you through the more
technical sections. If you are unfamiliar or uncomfortable with wiring,
contact a qualified electrician. We also provide telephone support at
1.888.830.1326 or visit us at Hunterfan.com.
READ and SAVE These Instructions
WARNING
Warning
-
To reduce the risk of the_electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the
mounting screws provided wim the outlet box. -
To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you
cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. -
To reduce the risk of electric shock, this fan must be installed with an isolating wall control switch.
-
To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between
rotating fan blades. -
Chemical bum hazard. Keep batteries away from children. This remote contains a lithium button cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body,
it can cause severe internal bums and can lead fo death in as little as 2 hours. AJways completely secure the battery compartment. If the battery compartment does not dose securely, stop using
the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Dispose of cells properly and keep away from children. Even used cells may cause injury. -
Non-rechargeable batteries are not to be recharged. Exhausted batteries are to be removed from the product.
Caution
- All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.
- Use only Hunter replacement parts. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.
However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Here are the tools you’ll need to complete your installation:
Here is what comes in your box:
We recommend that you pull everything out of the box and lay it out. We have grouped the drawn components below with the hardware you’ll need for those parts. The screws below are drawn to scale to make it easier to identify what piece of hardware is needed to install each component.
Hunter Pro Tip:
Do not discard the hardware bags or mix parts from different bags. Make note
of the symbol printed on each hardware bag. The symbols can be used to
identify the appropriate hardware for each step.
Choosing the Right Installation Location
You probably bought this fan with a location in mind. Let’s check below to
make sure it is a good fit.
Checking the Ceiling Angle:
Standard Mounting 
If you have a flat ceiling:
Hang your fan by a standard downrod. Some fans come with a shorter downrod for
a Low Profile installation.
If you have an angled or vaulted ceiling:
- You will need a longer downrod. (sold separately at HunterFan.com)
- If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit. (Sold separately at HunterFan.com)
Angled Mounting
A little more information on Angled Mounting:
For optimum performance and appearance, a longer downrod should be used with
your Hunter ceiling fan when installing on high or angled ceiling. If your
ceiling is angled greater than 34° you will also need an Angled Mounting Kit.
Longer downrods and the Angled Mounting Kit are sold separately at
HunterFan.com.
Hunter Pro Tip:
Installing the Ceiling Bracket
You have two options for installation. Pick which one works best for your location. Remove any existing bracket prior to installation. Only use the provided Hunter ceiling bracket that came in your fan’s box.
Installing the Downrod
Follow below if you are using the downrod that came pre-assembled in your box.
Need to install a longer or shorter downrod? Check out the guide at the end of
this manual.
Hanging the Fan
Progress Che ck:
Your fan should look like this.
Wiring the Fan
We know wiring is hard. Let’s make it easier.
Follow these steps to get your fan wired quickly and safely. Follow the route
below that best matches your wall switch setup. If you are unfamiliar with
wiring or uncomfortable doing it yourself, please contact a qualified
electrician.
Hunter Pro Tip:
Here is how to connect the wires:
Push the bare metal ends of the wires together and slide a wire nut over them.
Then, twist the wire nut clockwise until tight. Give it a gentle pull to make
sure none of the wires are loose.
Installing the Canopy
Installing the Blades
Put the blade washers found in the hardware bag onto the blade screws found in
the A hardware bag. Then install the blade screws to secure each blade to the
fan.
Assembling the Light Kit
Installing the Bulbs and Glass
Preparing the Remote
The remote control is already paired for use. For your convenience, a remote function card is packed in with your remote.
NOTICE
- Always purchase the correct size and grade of battery most suitable for the intended use.
- Replace all batteries of a set at the same lime.
- Clean the battery contacts and also those of the device prior to battery installation.
- Ensure the batteries are installed correctly with regard to polarity(+ and-).
- Remove batteries from equipment which is not to be used for an extended period of lime.
- Remove used batteries promptly.
Remote Function Guide
Installing the Remote Control Cradle
You have two options for installing the remote cradle.
Choose which path works best for you.
Reversing the Fan
Limited Lifetime Warranty
Hunter Fan Company grants this limited warranty to the original purchaser of
this Hunter ceiling fan. This document can be found at
www.HunterFan.com.
Thank you for choosing Hunter!
How Can Warranty Service Be Obtained?
Proof of purchase is required when requesting warranty service. The original
purchaser must present a sales receipt or other document that establishes
proof of purchase. Hunter, at its sole discretion, may accept a gift receipt.
To obtain service, contact Hunter Fan Company online or by phone.
www.HunterFan.com/SupporVContact-Us/
1-888-830-1326
Please do not ship your fan or any fan parts to Hunter. Delivery will be
refused.
What Does This Warranty Cover?
Motor – Limited Lifetime Warranty
If any part of your ceiling fan motor fails during your ownership of the fan
due to a defect in material or workmanship, as determined solely by Hunter,
Hunter will provide you with a replacement fan free of charge. The foregoing
limited warranty applies only to the motor itself and does not apply to
electronic controls – such as remote control transmitters, remote control
receivers, or capacitors – used in conjunction with the motor. Such electronic
control items are included in the one-year limited warranty below.
Other – One-Year Limited Warranty
Except as otherwise indicated throughou1 this warranty, if any part of your
Hunter ceiling fan fails at any time within one year of the date of purchase
due to a defect in material or workmanship, as determined solely by Hunter,
Hunter will provide a replacement part free of charge.
Light Kits – Warranty May Vary
Light kits are included in the one-year limited warranty. However, you may
qualify for additional warranty coverage if your fan includes one of the
following:
LED Light Kits – Three-Year Limited Warranty
If your LED light kit module (not including glass components) or LED bulb
fails at any time within three years of the date of purchase due to a defect
in material or workmanship, as determined solely by Hunter, Hunter will
provide a replacement part free of charge.*
- If no replacement product/part can be provided for your fan, we will provide a comparable or superior replacement praducr/part at the sole discretion of Hunter
What Does This Warranty NOT Cover?
Labor Exduded. This warranty does not cover any costs or fees associated with
the labor a Oncluding electrician’s fees) required to install, remove, or
replace a fn or any fan parts. There is no warranty for light bulbs (except
where otherwise noted); remote control batteries; fans purchased or installed
outside the United States; fans owned by someone other than the original
purchaser; fans for which proof of purchase has not been established; fans
purchased from an unauthorized dealer; ordinary wear and tear; minor cosmetic
blemishes; refurbished fans; and fans that are damaged due to any
of the following: improper installation, misuse, abuse, improper care, failure
to follow Hunter instructions, accidental damage caused by the fan owner or
related parties, modifications to the fan, improper or incorrectly performed
maintenance or repair, improper voltage supply or power surge, use of improper
parts or accessories, failure to provide maintenance to the fan, or acts of
God (e.g. flood).
ORIGINAL PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR A CLAIM OF ANY KIND WITH
RESPECT TO THIS PRODUCT SHALL BE THE REMEDIES SET FORTH HEREIN. HUNTER FAN
COMPANY IS NOT RESPONSIBLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, DUE TO
PRODUCT FAILURE, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF
CONTRACT, OR OTHERWISE. Some States do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion
may not apply to you.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
APPLICABLE TO THIS PRODUCT ARE LIMITED IN DURATION TO THE PERIOD OF COVERAGE
OF THE APPLICABLE LIMITED WARRANTIES SET FORTH ABOVE. Some States do not allow
limitations on how long an implied warranty lasts, so the above limitation may
not apply to you.
How Does State Law Affect Warranty Coverage?
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state.
Downrod
If you need a different downrod length follow these steps:
Troubleshooting
- Fan Doesn’t Work
- Make sure power switch is on.
- Check the circuit breaker to ensure the power is turned on.
- Make sure the blades spin freely.
- Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wirtng diagram.
- Excessive Wobbling
- Make sure the blades are property installed on the blade iron posts.
- Turn the power off, support the fan carefully, and check that the hanger ball is property seated.
- Use the provided balancing kit and instructions to balance the fan.
- Noisy Operation
- Make sure the blades are property installed.
- Check to see H any of the blades are cracked. If so, replace all of the blades.
- Remote Control of Fan is Erratic
- Make sure the battery is installed correctly.
- Install a fresh battery.
- Multiple Remote Issues
If you have multiple remotes or multiple remote-controlled fans installed on the same circuit breaker and you are experiencing interference or faulty operation of your remote controls, please go to
www.HunterFan.oom/FAOs and click “How do I properly install multiple remote-controlled fans?” for information on how to correct this issue.
Hunter Pro Tip:
Cleaning the Fan
Use soft brushes or cloths to prevent scratching. Cleaning products may damage
the finishes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>