SEALEY MS0812D Helmet Hanger/ Dryer User Manual

SEALEY MS0812D Helmet Hanger/ Dryer

Specifications:

• Model No: MS0812D
• Electrical Class: III
• Plug Type: 3-Pin Transformer

Product Usage Instructions

Safety

Read and follow all safety instructions provided in the manual carefully to prevent injury or damage to the product.

Electrical Safety for Use of Power Supply

• Only use the power supply provided with the product. Using any other type may result in injury or fire.
• Do not turn on the mains supply until the power supply lead is connected to the fan assembly.
• Ensure proper installation of safety devices such as RCD to minimize the risk of electric shock.
• Regularly inspect the power supply, cable, and connections for wear or damage before use.
• Do not dismantle the power supply or use in wet/damp conditions.
• Avoid overloading the product and ensure it is securely fixed to the wall.

Introduction

Get familiar with the product and its components before installation and use.

Installation & Assembly

1. Attach the wall plate to the bracket using the provided bolts.
2. Mark the wall through the holes on the assembly to indicate placement.
3. Use suitable wall fixings and drill holes accordingly for proper installation.
4. Fix the hook assembly securely to the wall.

Operation

1. Connect the power supply into the fan cooler plug connection.
2. Turn on the power supply when required to operate the fan.

FAQ

• Q: Can I use a different power supply with this product?
  • A: No, only use the power supply provided with the product to avoid potential hazards and warranty void.
• Q: Is it safe to dismantle the power supply for maintenance?
  • A: No, there are no user-serviceable components in the power supply. Do not dismantle it.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

ELECTRICAL SAFETY FOR USE OF POWER SUPPLY

• WARNING! DO NOT use any other type of power supply with this product. Only use the one provided. Failure to observe this warning could result in injury and or fire. The use of any other type of power supply will invalidate the warranty.
• DO NOT turn on the mains supply until the power supply lead is connected to the fan assembly.
• WARNING! It is the user’s responsibility to read, understand, and comply with the following instructions.
• WARNING! You must ensure the risk of electric shock is minimized by the installation of appropriate safety devices e.g. RCD.
• NOTE: If the product is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable Appliance Test) tested.
• Ensure that you inspect the power supply, cable, and connections for wear and damage to ensure items are safe before connecting them to the main supply. If worn or damaged DO NOT use.
  • WARNING! There are no user-serviceable components in the power supply. DO NOT dismantle.
  • WARNING! For indoor use only. DO NOT allow the power supply to become wet. DO NOT use in damp conditions.
• DO NOT pull the power supply plug from the main socket by the lead.
• DO NOT locate this product assembly in such a position as to create the risk of injury from contact with the head or any other part of the body.
• DO NOT overload this product; it should only be used for the designed purpose.
• DO NOT locate in a position where items could fall from the product assembly owing to accidental contact.
• Ensure that the product is firmly fixed to the wall refer to 4.4 below.
• Ensure that, when installed, it can be accessed without over-reaching or over-balancing.

INTRODUCTION

A robust steel, powder paint coated, hanger. Can be mounted to your doors, walls or wardrobe. An integral, quiet running fan will quickly and conveniently dry your helmet, whilst on the hanger. Inhibiting the build-up of damp and odor. Keep all your motorbike gear in one place. This hanger comes with an integrated strap that will hold your gloves, and it can also be used to hang your jacket, trousers or suit from. With the ability to mount the bracket where is convenient to you, this frees space from in your wardrobe, hallway or cupboards, and can place your bike gear where you want it. The angle of the bracket can also best display the decorative capabilities of a motorcycle helmet.

SPECIFICATION

• Model No :………………………………………………. MS0812D
• Electrical Class: ………………………………………………….III
• Plug Type : ……………………………………3-Pin Transformer

INSTALLATION & ASSEMBLY

Attach the wall plate to the bracket using the four bolts provided. Ensure the wall plates are perpendicular to the bracket.
Hold the assembly in the desired position and mark the wall through the four holes, fig.1.

Remove from the wall.

Use wall fixings that are suitable for the type of wall and the weight of the loaded product. Drill four holes suitable for the wall fixings. Fix the hook assembly to the wall.

OPERATION

FAN

• Connect the power supply into the fan cooler plug connection.
• Turn on the power supply when required, in order to operate fan.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling center, and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

WEEE REGULATIONS

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications, and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: The guarantee is 12 months from the purchase date, proof of which is required for any claim.

• Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
• 01284 757500
• sales@sealey.co.uk
• www.sealey.co.uk

© Jack Sealey Limited

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>