TWS Y40 Earphones Wireless Head Phone Instructions

July 29, 2024
TWS

TWS Y40

Function Instructions

■ Diagrammatic Sketch
  1. LED display
  2. Charging ejector
  3. Type-c interface
  4. Ear cap
  5. Charging contacts
  6. Touch area
■ Specifications

Model: Y40
Bluetooth version: V5.3+EDR
Earbud battery: 30mAh
Charging case battery: 350mAh
Power input: 5V
Standby time: ≤140 hours
Working time: ≥4.5 hours (maximum volume)
Working voltage: 3.3V-4.2V
Charging time: 80 minutes
Speaker impedance: F13/32Ω
Frequency response: 20-20KHZ
Transmission distance: over 10 meters

■ Package List

Charging box         Earphones        Earphone caps (3 pairs)

Type-C                  Users manual

■ Bluetooth pairing

Step 1: Take the earphones out of the charging bin.
Step 2: Turn on Bluetooth.
Step 3: Find the headset Bluetooth name Y40.
Step 4: Click Connect, voice reminder after successful connection.

Note: If there is pairing device information, the headset will automatically connect to the device within 2-4s. If the headset is not connected to the device, The headset automatically turns off after 3 minutes of standby.

■ Turn On

(1) Open the top cover of the charging compartment and take out the headset. At this time, the headset automatically starts and matches, waiting for the connection of the mobile phone.
(2) The headset is not in the charging bin and the headset is off, long press the left and right headphones for 3 seconds to turn on.

■ Turn Off

(1) Put the left and right earphones into the charging bin, close the top cover of the charging bin, and the earphones will automatically shut down and charge.
(2) While the headset is connected, press and hold either headset for 3 seconds to shut it off.

■ Operation of earphone
Off State Turn on manually Hold both ears for 3 seconds
Turn off manually Tap and hold for 3 seconds
Playing State Play/Pause Single tap
Previous track Double click left
Next track Double click right
Volume + Triple tap left
Volume – Triple tap right
Call State Answer/End a phone call Single tap
Reject a phone call Tap and hold for 1.5 seconds
In Siri Activate voice assistant Four strikes on either side
On State Transparent -ANC – Normal mode switch Touch either ear for 1.5

seconds

■ Precautions for use

(1) Headphones should be stored in a dry and ventilated environment to avoid contact with oil, water vapor and steam. In order to avoid affecting product performance.
(2) Avoid cleaning with irritating, organic solvents or materials containing these ingredients.
(3) The headset should be used according to the correct specification requirements, and pay attention to the influence of the using environment on the headset. To ensure smooth connection, it is recommended that the distance between the mobile phone and the earphone be within 10 meters.
(4) If the earphone fails to connect or communicate properly, do not remove the earphone without permission The machine body and its accessories are not guaranteed otherwise.
(5) To charge the earphone, please use the standard car charger or the one specified by our company Chargers required.
(6) To ensure normal use of the earphone, ensure that the power of the earphone is sufficient.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals