TWS ES05 True Wireless Bluetooth 5.0 Earbuds User Manual
- June 5, 2024
- TWS
Table of Contents
ES05 True Wireless Bluetooth 5.0 Earbuds
User Manual
Packaging list
Product overview
- Earphone power display
- Charging case power display
- Charging slot
- Magnetic charging pin
- Multifunctional button
- Earphone Mic
Power On / Pairing
Mode 1 – with charging case
Power on: Take out the earphones from the charging case.
Pairing: Earphones will start pairing automatically with the Right earphone
Orange and White light flash alternatively
Pairing successful: earphone light off
Connection: Select ES05 from the device’s Bluetooth list.
Power On / Pairing
Mode 2 – Earphones stand alone
Power on: Touch the multifunctional button for 3 seconds.
Release when you hear the prompt sound ‘Power on’ with Orange light on.
Pairing: Earphones will start pairing automatically with Right
earphone Orange and White light flash alternatively.
Pairing successful: earphone light off
Connection: Select ES05 from the device’s Bluetooth list
Incoming call
Answer call / End call
Tap the left/right multifunctional button once
Reject call
Touch the left/right multifunctional button for 2 seconds
Music
Pause / Play
Tap the left/right multifunctional button once
Previous song
Double-tap the left multifunctional button
Next song
Double-tap the right multifunctional button
Music
Decrease volume
Touch the left multifunctional button for 3 seconds
Increase volume
Touch the right multifunctional button for 3 seconds
Note:
The above functions are not supported when the earphone is used in single
Voice
Voice Assistant
After connection with the device, triple-tap either multifunctional button to
launch your Device’s Voice Assistant
Game Mode
When playing a game and watching a video, long-press the headset for 3 seconds
until you hear the prompt and enter the game mode
Power off
Mode 1
Put the earphones back into the charging case, they will power off
automatically
Mode 2
Touch either multifunctional button for 3 seconds to power off the
earphones
Note:
Please turn off the device’s Bluetooth if connected
Charging
Earphones
Charging: earphone power indicator is always on
Full Charged: earphone indicator is off
Note: It takes about 1.5 hours to fully charge the earphones.
Charging case
Charing: charging case power indicator flash
Fully charged: charging case power indicator will remain on
Note: It takes about 2.5 hours to fully charge the charging case.
Safety Instruction
- Please remove the films on the earphones before charging them. It takes about 1.5 hours to fully charge.
- If you do not use the earphones for a long time, please charge the twin’s earphones and the charging box at least once every 3 months.
- About the connected Bluetooth device, the earphones will automatically connect it the next time.
- Keep the earphones and the packaging out of reach of children.
- If the earphones come in contact with liquids, quickly wipe them away. If submerged in the water, do not turn the earphones on until it is completely dried.
- The earphones are sweat-proof and rain-proof. However, do not use it underwater (e.g. swimming). Warranty void if the earphones are submerged in the water.
- Do not use earphones in thunderstorm weather, the earphones may not work properly in bad weather conditions, and may increase the risk of being hit by lightning.
- Earphones may not work properly under high temperature or high humidity conditions.
- Do not use it while driving, cycling, operating machinery, or performing other activities that require hearing surrounding sounds.
- Using earphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised that you keep volume levels moderate to low at all times for your safety.
Frequently Asked Questions
- The left and right earphones cannot pair or connect to Bluetooth? Method 1: Put the two earphones in the charging case and take them out in about 1 second. They will pair automatically in about 5 seconds. Then reconnect the Bluetooth device.
- While playing music, only one earbud works, and another doesn’t work? Put the earphones in the charging case to check whether the silent earbud is in low power. If it is in low power, please fully charge it. If it is in enough power, please re-pair them by following the steps mentioned in question 1.
- How to reconnect Bluetooth if disconnected? a. Put the earbuds in the charging case and take them out in 2 seconds. b. Delete ” ES05 ” from the Bluetooth list, and turn off Bluetooth. c. Turn on Bluetooth and select ” ES05 ” from the Bluetooth list, and re-connect.
- The earphone’s battery life is not last-long as expected? Fully charge the earphones at the first 2 times of charging. The built-in battery can be effectively used to have the expected battery life.
- The earphones won’t charge? Check whether the earphones are well put in the charging case and whether there is any foreign object on the charging pin.
- There are some unexpected pauses while calling and playing music? a. The earbuds are in low power, please charge them in time. b. There is an obstacle between earbuds and Bluetooth devices. c. Out of Bluetooth range.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>