TWS Bluetooth Earbuds, 5.0 Wireless IPX7 Waterproof-Complete Features/Instruction Manual

TWS Bluetooth Earbuds, 5.0 Wireless IPX7 Waterproof

Specifications

• ITEM TYPE: TWS Earphones
• COLOR: White/ Black (Optional)
• BLUETOOTH VERSION: version 5.0
• WORKING DISTANCE: 10 meters
• TALK TIME: 5-6h (one full charge)
• MUSIC PLAYING TIME: 5-6h (one full charge)
• EARPHONE BATTERY CAPACITY: 55mAh
• CHARGING TIME: 30min
• CHARGING CASE CAPACITY: 3500mAh
• SUPPORT SYSTEM: all Bluetooth devices and mobile phones
• BLUETOOTH VERSION : V5.
• SUPPORT AGREEMENT : A2DP/AVRCP/HFP/HSP,
• FREQUENCY RANGE: 2402MHz～2408MHz
• TRANSMISSION DISTANCE: 10M
• DURATION OF PLAYING MUSIC : 3.5hours
• CHARGING TIME OF EARPHONE : 1hour
• CHARGING TIME OF CHARGING BOX : 2.0 hours
• CHARGING METHOD : Power adapter
• OUTPUT: DC 5V 150mA

Introduction

The connection is made simple, fast, and stable thanks to a high-performance Bluetooth 5.0 smart chip. Working distances of up to 10 meters are possible. The 3500mAh carrying case can be used to store earbuds as well as offer emergency power for your phone. The graphene composite diaphragm has the advantages of small size, quick response, and high fidelity, which aids in optimizing sound’s high frequency extension to represent more details. The charging case’s remaining power and the charging process of the left and right headphones are intuitively displayed on LED panels. Because the portable charging case can also function as a bracket, no additional mobile phone brackets are required to watch movies. The TWS earphone has an IPX7 waterproof rating and offers good water resistance. You don’t have to be concerned about getting wet or sweaty in the rain. Restore high-fidelity sound quality with CVC 8.0 and DSP intelligent noise reduction technology.

The simple touch control operation eliminates the inconvenience of using a traditional button. One-touch buttons let you pause or resume playback, increase or decrease volume, turn on or off, and answer or end calls. Quick and easy pairing process: simply remove the storage box, and the headset will power on and pair immediately. Split-type true wireless earphones with left and right pieces that can be linked to the phone individually for different settings. The earphone’s battery life is really lengthy. On a single charge of 30 minutes, you can listen to music for 5-6 hours. It has a battery life of 280 hours thanks to the extra power stored in the charging case. The headphones may easily be hidden in the ear due to the human ear structure, making your ears more comfortable and stable. It works with any Bluetooth- enabled devices, including phones, tablets, and laptops.

PRODUCT OVERVIEW

KEYS AND INTERFACE

HOW TO CONNECT

CONNECT WITH BLUETOOTH

POWER ON
The earphones will power on automatically when take out from the charging case.

BLUETOOTH PAIRING

After the left and right earphones are removed from the charging box, the earphones are turned on and automatically paired to stereo. After the successful connection, the host (R earphone) will flash the “red and blue light” alternately, and the auxiliary headphone indicator will slowly flash the blue light. At this point, turn on the bluetooth on mobile phone and search device “W1” to connect successfully.

POWER OFF

• Automatically power off after putting the earphones into the charging box.
• Automatically power off in 5 minutes after the earphones are disconnected from Bluetooth.

HOW TO WEAR

1. The earphones are equipped with (large, medium and small) three ear capsizes (as shown in figure below). Select the right ear cap to wear will provide the best experience and reduce the noise.

2. The earphones are marked with “L” and “R”. Please wear the earphones marked with “L” on the left ear, and the earphone marked with “R” on the right ear. Then, turn the earphones to position it firmly and comfortably (as shown below).
   FUNCTION OPERATION

Project

name

| ****

Single click

| ****

Double click

| ****

Long press

---|---|---|---

Right earphone

| Answer incoming

call/hang up

| ****

Previous song

| ****

volume+

Play/pause music|  |

Left earphone

| Answer incoming

call/hang up

| ****

Next song

| ****

volume-

Play/pause music|  |

1. Music control: double click the R earphone touch key to switch to the previous song and double click the L earphone touch key to switch to the next song; Single click any earphone touch key to pause/play.
2. Volume control: long press R earphone touch key to turn up volume, long press L earphone touch key to turn down volume.
3. Answer incoming call: when there is an incoming call, press any earphone touch key.
4. Rejecting incoming call: touch any touch key on the earphone and release 2 seconds later during any incoming call.
5. Voice control of Siri: touch the touch key of any headset for 2 seconds and wake up or turn off Siri function after hearing the voice notification “Di” (this function only supports IOS users).
6. Single ear application: take out the R or L earphone in the charging box. The blue indicator light of the earphone will flash rapidly for three times and then go into the state of alternating red and blue light. Turn on the mobile phone bluetooth device to search the earphone device TWS-W1 and connect it to operate normally.
7. Connect two mobile phones; According to the pairing steps, turn off bluetooth device on mobile phone A after being successfully paired with earphones, the headset enters the mode of being paired again into the state, turn off the earphones after successfully pairing with mobile phone B, at this time, turn on the bluetooth device on mobile phone A, the headset will automatically connect the two mobile phones again after startup , any phone calls from mobile A or B can be answered by the earphones
8. Use the earphones again: after the left/right earphone is removed from the charging box, the earphones will automatically startup, and the left/right earphone will automatically connect to bluetooth (the last time the device is connected).
9. Restore factory setting: quickly clicking the touch key for three times in charging state can restore factory setting.

INSTRUCTIONS OF EARPHONES INDICATOR:

1. Blue light flashes slowly, no connection.
2. Blue light flashes every 5 seconds, normal connected.
3. Red light flashes, low battery
4. Red and blue lights flash alternately, in pairing.

EARPHONE CHARGING

1. Put the left and right earphone into the charging box.
2. Charging state: the earphones indicator “red light” stays on.
3. Charging is complete: the earphones indicator flashes “blue light” goes off after a few seconds.

CHARGED BY CHARGING BOX

1. Please use the USB cable with output voltage of DC5V/1A to plug the charging box into the power supply and start charging. You can use the computer USB port or other USB port charger (it is necessary to select the charger approved by the official manufacturer).
2. The red light stays on while charging, the blue light is on when it is fully charged, and the light goes out after a few seconds.
3. It takes about 2 hours for the charging case to be fully charged.

ATTENTION

1. Do not remove or refit the earphones for any reason, or the earphone may break down and burn down, and the manufacturer will not guarantee the damage caused.
2. Please do not put the equipment in contact with corrosive liquid, or it will cause serious damage to the equipment. The manufacturer will not guarantee the damage caused.
3. Please do not put the equipment in an environment with too high or too low temperature (below 0 or above 45 degrees).
4. Please avoid using equipment lights near children or moving eyes.
5. Please do not use the equipment in thunderstorm weather. Thunderstorm may cause abnormal operation of the equipment and increase the risk of electric shock.

WARNING

• The product is equipped with lithium battery. Please do not expose the product to intense sunlight, burn or throw it into the fire to avoid explosion.
• This product cannot be charged with a voltage higher than 5V, otherwise it will burn out the headset and thus cannot be used

COMMON PROBLEMS

1. The charging box cannot charge: please check whether the interface is properly connected or try to replace the charging line.
2. The earphones cannot be charged: please check if there is power in the charging box, and then wipe the contact point between the earphones and the charging box to prevent improper charging contact caused by dust.
3. The earphones cannot be turned on: please check if there is power in the earphones and put it into the charging box again to start up.
4. Two “W1” device names appear in the mobile phone search, delete the two bluetooth names, turn off the earphones and restart the connection.
5. The voice of answering the call is too low or not clearly: try to turn up the tone of mobile phone.
6. How far is the interconnection distance between the left and right earphones: within 3 meters of zero obstacle.

Frequently Asked Questions

• What does TWS mean in terms of Bluetooth earbuds?| TWS stands for True Wireless Stereo, not a model or a brand. After the arrival of Apple’s TWS air pods in 2016, TWS Bluetooth headphones became surprisingly popular. When the headset is used, there are no cables connecting it to your phone or even to each other, giving you entire freedom of movement.

• What is the procedure for programming my TWS wireless earbuds?
  Press and hold the multi-function key on both earphones for 6 seconds, then release when the indicator lights change red and blue, and respond with a voice prompt: “PAIRING.” They will then be automatically paired and linked, and you will hear a voice prompt: “CONNECTED.”

• What is the procedure for turning on TWS earbuds?
  To turn on each earphone, press and hold the power/pairing button for up to 2-3 seconds. A voice prompt with “Power On” will be heard.

• When TWS is fully charged, how do you know?
  If the light is flickering, the battery is charging; if the light is solid, the battery is fully charged; and if there is no light, the battery is entirely depleted.

• What does TWS stand for?
  Wireless earbuds have grown into a very compact size and cordless form factor with the advancement of Bluetooth technology, which we term True Wireless Stereo (TWS).

• What does TWS stand for?
  True Wireless Stereo (TWS), sometimes known as Truly Wireless, is a Bluetooth wireless technology that produces true stereo sound quality. The technology allows you to connect audio devices over Bluetooth and send the Left and Right channels separately.

• What is the procedure for resetting TWS earbuds?
  Remove the earbuds from the case and press and hold the buttons until they turn off. Hold down the buttons on both earbuds for roughly 5 seconds, starting with the earphones in the OFF position. The LEDs will become white for around 5 seconds before turning off. Your earphones will be reset.

• How do TWS headphones sync?
  Step 1: Long press both sides’ multi-function buttons at the same time till the led alternately flashes red and blue.
  Step 2: To pair, long press EITHER earbud; a voice will notify you that it is ready to pair.
  Step 3: Turn on your smartphone’s Bluetooth.

• Why won’t my TWS pair?
  Step 1: Remove the pairing information for the left and right earbuds (Reset the i12 TWS). 5 times press the power button in pairing mode until the LED turns red.
  Step 2: To turn on the i12 TWS, hold down the function key for 5 seconds.
  Step 3: Go into pairing mode, which takes around 5 seconds, and listen for the prompt tone “pairing mode.”

• How do you take a call when wearing TWS headphones?
  Press the power button once to answer/end a call. Double-press the power button to reject the call.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>