SOLIGHT WO66-B LED Table Lamp Instruction Manual
- August 24, 2024
- Solight
Table of Contents
SOLIGHT WO66-B LED Table Lamp
Product Information
Specifications:
- Product: EN WO66-B LED table lamp
- Power Input: Max. 8W
- Luminous Flux: Max. 300lm
- Chromaticity: 3000K, 4000K, 5000K
- Dimensions: Approx. 630 x 110 x 90mm
- Colour Rendering Index (CRI): >80
- Power: DC 5V; 2A (USB cable included, adapter not included)
- Clamp Span: 4cm
Product Usage Instructions
-
Power Connection:
Connect the provided USB cable to the lamp and a power source that supports DC 5V; 2A input. -
Adjusting Chromaticity:
Select the desired color temperature (3000K, 4000K, or 5000K) by using the corresponding control on the lamp. -
Mounting the Lamp:
Attach the lamp securely using the clamp with a span of 4cm to a suitable surface ensuring stability. -
Turning On/Off:
Use the power button on the lamp to turn it on/off as needed.
FAQ:
-
Q: Is an adapter included in the package?
A: No, the package includes a USB cable for power input, but an adapter is not included. -
Q: What is the recommended position for mounting the lamp?
A: Mount the lamp on a flat surface within reach of the power source, ensuring the clamp is securely attached.
Dear customer, thank you for purchasing our product. Please read the following instructions carefully and follow them to serve you safely and to your satisfaction. This will prevent misuse or damage. Avoid unprofessional handling of this appliance and always observe the electrical appliance usage guidelines. Keep the instruction manual carefully. For use in the home or indoors. This product should only be used by an adult. Never expose to environments with high humidity (e.g. bathroom), and avoid contact of the product with liquids.
TECHNICAL PARAMETERS
| Power input | max. 8W |
|---|---|
| Luminous flux | max. 300lm |
| Chromaticity | 3000K, 4000K, 5000K |
| Dimensions | approx. 630 x 110 x 90mm |
| Color rendering index | CRi>80 |
| Power | DC 5V; 2A (USB cable included, adapter not included) |
| Clamp span | 4cm |
DESCRIPTION OF EQUIPMENT
- A – Clamp for attachment
- B – USB power cable
- C – On/Off button
- D – Increase brightness (+)
- E – Color temperature change
- F – Brightness reduction (-)
- G – Luminaire
- H – 360° movable arm
NOTICE
- Do not repair or disassemble the equipment.
- Repairs may only be carried out by a qualified service technician of the manufacturer.
- Avoid contact with water.
The product is covered by a declaration of conformity under the applicable regulations. On request from the manufacturer: info@solight.cz, or downloadable from www.solight.cz. The light source of this luminaire is non-replaceable, at the end of its service life the entire luminaire must be replaced and disposed of in a designated place. This product contains a light source that for design reasons cannot be removed for verification and therefore the entire product is considered a light source. The supply cable cannot be replaced if damaged, the device must no longer be used.
Solight Holding, s.r.o., Na Brně 1972, Hradec Králové 500 06, Czech Republic.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>