maxpower MPD12MG Magpulse Pro Bluetooth Speaker User Manual

MPD12MG Magpulse Pro Bluetooth Speaker

“`html

Specifications:

• Product Name: MPD12MG
• Bluetooth Version: 4.0
• Battery Capacity: Not specified
• Playing Time: Not specified
• Talking Time: Not specified
• Charging Time: Not specified
• Charging Current: Not specified
• Speaker Unit: Not specified
• Product Size: 77x110mm
• Product Weight: 105g

Product Usage Instructions:

Operations:

1. Power On/Off: Long press power button for 2
   seconds to power on/off.

2. BT Mode:

3. Turn on the speaker, it will be in BT mode.

4. Scan for BT device on your mobile phone and select
   MPD12MG.

5. Once paired, control volume and tracks through your mobile
   device or the speaker control panel.

6. TWS Connection: Press TWS button to
   connect.

7. Volume Control:

   • Press button once for volume up and long press for next
     song.

   • Press button once for volume down and long press for previous
     song.

8. LED Lighting Mode: Press button twice to
   switch between modes and long press two buttons for 3 seconds to
   turn on/off SOS lighting.

9. Calling:

   • To answer a call, press button once.
   • To hang up, press button 3 times.
   • To protect call privacy, press button 3 times.

Frequently Asked Questions:

1. Note: Please read the manual carefully before
   use and keep it properly.

2. First Use: Fully charge the product before
   first use.

3. Adapter: Use a certified adapter that has
   passed national safety certification.

4. Long-Term Storage: If not using the product
   for a long time, ensure to charge it at least once.

“`

77x110mm 105G 4

MagPul
P

ACCESSORIES
A: BT speaker B: Type-C charging cable C: User manual D: 5V USB Wall plug

A

MPD12MG
USER MANUAL

USER MANUAL

B

C

D

01

OPERATIONS
7. Power Saving
Speaker will power off automatically to save battery when nothing is connected after 10 minutes.
8. Charging
Important note Preferably use supplied USB-C charging cable Use an output source 5V/2A (or above) Charge when you hear low battery prompt tone or the indicator flash red. The red indicator will be normally on while charging and switch off after fully charged.

FUNCTION INSTRUCTIONS
Power button

LED light

Status indicator

LED lighting Total 5 LED lighting modes Power on/ TWS (blue indicator)

Status indicator

Low battery (red indicator flash) Charging (red indicator normally on)

Fully charged (red indicator off )

07

08

PANEL FUNCTIONS
4 5 6

1 2 3
7

1

Power/LED Mode/ TWS function; Hold to power on/off,

double tap for different LED Mode & Triple tap to go into

TWS mode.

Short press one time: Play/Pause; Pick up/Hang up call

Short press twice: Switch LED lighting mode

Short press 3 times: Protect call privacy; Reject incoming

call; TWS connect/disconnect

2

Short press one time: Volume” +”

Long press 2s: Next song

3

Short press one time: Volume” – ”

Long press 2s: Previous song

23

Short press : Bluetooth disconnection

Long press 2s at the same time: Turn on/off SOS light

4

LED Indicator light

5

Type-C Charging port

6

Built in Microphone

7

LED light bar

02

OPERATIONS 1. Power On/Off
Long press ” “button 2s to power on/off.
2. BT Mode
1. When you turn on the MaxPower Speaker, it will already be in the BT mode and ready to pair to your mobile device/smart device. 2. Scan for BT device on your mobile phone. Please select “MPD12MG” on your mobile device 3. Once paired, the volume and tracks can be controlled by your cellphone or your speaker control panel.
Power button Status indicator
Bluetooth
My Device MPD12MG
03

OPERATIONS
3. TWS Connection
1. Turn on two MaxPower speakers. They will already be in the BT mode. Make both the speakers are not connected to any BT devices. 2. Tap the power button 3 times on one (master) of your speakers. You will hear an immediate chime, this means that the master enter search mode, the pairing process will take 30 seconds. If you successfully established a TWS connection, both units will make a short chime simultaneously, the master speaker will have a flashing blue and the slave unit will have a solid blue light. (If this does not work, make sure that you speaker is not connected to other BT device which you may have connected to before) 3. Once both the speakers are connected via TWS, then repeat the same process that you normally would of connecting them via BT from your cellphone.
Power button
TWS

OPERATIONS

4. Volume Control
Short press ” “button one time for volume up, there will be prompt tone when up to maximum volume. Long press ” “button 2s for next song. Short press ” “button one time for volume down. Long press ” ” button 2s for previous song.

Button

Button

5. LED Lighting Mode

After power on, short press ” “button twice to switch LED lighting mode

(Mode 1 – Mode 2 – Mode 3 – Mode 4 – Mode 5 – turn off ).

Long press ”

“2 buttons 3s at the same time to turn on/off SOS

lighting.

Button

Button

OPERATIONS
6. Calling
When a call is coming, short press ” “button to answer. Short press” ” button 3 times to hang up. When during a call conversation, short press ” “button to hang up. Short press ” ” button 3 times to protect call privacy (move call to phone).
Power button
88888888888

Reject

Answer

Power button

04

05

06

SPECIFICATIONS

Product Name Bluetooth Version Battery Capacity Playing Time Talking Time Charging Time Charging Current Speaker Unit Product Size Product Weight

MPD12MG 5.3 3.7V/2600mAh 5-6 hours(70% volume, LED lighting off) 6-8 hours(50% volume, LED lighting off) 8-10 hours 3-5 hours 5V 1A 8W x2 199 x 80 x 47.2mm 501g±50

09

FREQUENTLY ASKED QUESTIONS
Q1: What kind of charger should we use for the speaker? A: All common USB chargers can be used, while we suggest the ones 5V/2A or above 2A. Q2: What if there is noise or discontinuous sound during playing? A: The speaker can be normally used within 10m under no obstruction environment. If it is beyond 10m or with obstruction, there might be noise or discontinuous sound. Q3: Why the speaker power off automatically after power on without any operation? A: When there is no bluetooth pairing in 10 minutes, the speaker will shut down automatically to reduce power consumption. Q4: Why does the speaker cannot connect the once-paired cellphone? A: First, remove the speaker’s paired name from the cellphone’s Bluetooth list and then restart pairing. Q5: When speaker can not be turned on or used normally. A: Please charge it for some time, then long press power on button 10-30s to reset.
10

FREQUENTLY ASKED QUESTIONS
Notes: 1. Please read this manual carefully before use and keep it properly. 2. For the first use, please fully charge the product. 3. Pls use certificated adapter that has passed national safety certification. 4. If you do not use the product for a long time, be sure to charge it once
within a month at least to maintain its performance. 5. Do not use this product in an extremely cold or hot environment, such as
temperature beyond the range of 5¥-35¥. If use it beyond the above range, the product may stop automatically to protect the internal circuit. 6. When charging it in a high temperature environment, the product may automatically stop charging to protect the battery. At this time, the charging indicator usually ashes quickly to indicate that the charging environmental temperature or the product internal temperature is too high. 7. Storage environment temperature: -5j35¥ RH70% (recommended 25¥±5).
Important safety instructions: 1. Do not disassemble or repair this speaker personally, otherwise it may
cause product damage or personal injury. 2. Do not use it in dusty, humid, dry, and high-temperature environment. 3. Do not place this product near a heat source, or a place with direct sunlight,
a lot of dust, or mechanical vibration. 4. In order to reduce the risk of fire, please do not cover this product with
newspapers, tablecloths, curtains etc., during use. 5. If the product has a waterproof feature, please do not exceed the nominal
parameter range when using it. 6. When the product is damaged (such as the power cord or plug is damaged,
liquid enters or objects fall into the device, unable to operate normally or falls), it must be repaired. 7. When the product is fully charged, do not connect it to the charger for further long time charging. 8.The maximum ambient temperature should not exceed 40°C.
*This speaker supports mobile phones/ tablets/ PCs etc. Here this User Manual is illustrated base on mobile phones.
11

Federal Communications Commission (FCC) Statement.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide Reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by Universal Electronics, Inc. may void the FCC authorization to operate this device.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF exposure statement: This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The device is installed and operated without restriction. FCC IDA5C-MPD12MG
12

MADE IN CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>