maxpower MPD1530-XB Professional Speaker User Manual

maxpower MPD1530-XB Professional Speaker

Product Information

• Specifications
  • Model: MPD1530-XB
  • FCC ID: 2BBFBMPD1530-XB
  • Input: 110-240V AC, 50/60Hz
  • Built-in rechargeable battery: 12V, 7AH
  • Maximum power consumption: 50W
• Features
  • Bluetooth connectivity for wireless audio streaming
  • Professional speaker with high-quality sound output
  • FM radio with built-in antenna
  • Power input for AC110V-240V
• Manufacturer Information
  • Manufacturer: Universal Electronics Inc. Address: 5610 Parkersburg Dr., Houston, TX, United States, 77036

Product Usage Instructions

• Power Connection
  • Connect the provided power cable to the POWER INPUT port on the device. Plug the other end of the cable into a power outlet with an AC110V-240V power supply.
• Bluetooth Connection
  • To connect a Bluetooth-enabled device, follow these steps:
  • Turn on the MPD1530-XB by pressing the POWER button.
  • Enable Bluetooth on your device and search for available devices.
  • Select “MPD1530-XB” from the list of available devices.
  • If prompted, enter the provided PIN or confirm the pairing request on both devices.
  • Once connected, you can stream audio wirelessly to the speaker.
• FM Radio
  • The MPD1530-XB features a built-in FM radio with an antenna. To use the FM radio:
  • Ensure the device is powered on.
  • Extend and position the FM ANTENNA for better reception.
  • Use the controls on the device to tune in to your desired FM radio station.
• Troubleshooting
  • If you encounter any issues with the MPD1530-XB, please refer to the troubleshooting section in the user manual or contact our customer support.
• Frequently Asked Questions (FAQ)
  • Q: Can I use the MPD1530-XB without connecting it to a power outlet?
  • A: Yes, the MPD1530-XB has a built-in rechargeable battery that allows you to use it without a power connection for a certain duration.
  • Q: Can I connect multiple devices simultaneously via Bluetooth?
  • A: No, the MPD1530-XB can only connect to one Bluetooth-enabled device at a time. To connect a different device, disconnect the current one and follow the Bluetooth connection instructions again.
  • Q: How can I improve the FM radio reception?
  • A: Make sure you extend and position the FM ANTENNA properly for better reception. Adjust its angle and location until you achieve optimal signal strength.

IMPORTANT SAFETY MEASURES

• Before using this machine, please read all the safety and operating instructions, meanwhile, please observe all the indications about safe operating.
• These safety and operating instructions should be kept in condition of consultation.

1. Protection of electric power supply line: Be aware that the electric power supply line is not tramped, or pressed by heavy objects. Pay special attention to the plug of the power supply line and outlet on the machine. DO NOT lengthen the electric shock, DO NOT pull or drag the power supply line.
2. Ventilation: This set must be put in a ventilated place. DO NOT put the disk on it or cloth to cover it. The distance away from the wall should not be less than 10 centimeters. DO NOT put this set on the bed, sofa, carpet, or other objects with similar surfaces in case of good ventilation.
3. Casing Dismantling: DO NOT dismantle the casing. If one touches the inner components, he will probably get a serious electric shock.
4. Unusual smell: When you discover an unusual smell and smoke, cut power supplies immediately and pull out the plug from the outlet on the wall. Contact the sales shop or nearest repair center.
   • Attention: This set applies to AC 110V / 50Hz~60Hz power supply. Use a standard power supply. Please be sure for the correct power supply before using it.

PRODUCT FEATURES

• Wireless
• Plays songs stored in an external audio device.
• Guitar input
• Microphone inputs
• Wireless microphone included
• With remote control
• Built-in rechargeable battery
• Super dynamic sound speaker
• X-Bass is powerful

REMOTE CONTROL

• Standby
• LINE (Audio input)
• Prev/FM CH-
• Play/pause/FM tuner
• Next/FM CH+
• Repeat
• Stop
• Volume up
• Volume down
• Mute
• Equalizer
• Number

CONNECTING

1. This set applies to AC 110V, 50/60Hz
2. AC power: the battery can be charged when connected to AC power. The red battery light is charging, it will change to green once battery completely charged.
3. The internal battery will be charged even device is switched off when plugged into AC power
4. The speaker battery can be charged using a 12V external car battery as well(connect cable not included) by “DC 12V input”. Please make sure “+” and “-” are in the right connection.
5. Adjust function keys to your personal audio preference.

BATTERY & CHARGING

1. The units take approximately 8 hours to fully charge. It will automatically begin charging once the power cord is connected.
2. If the battery power is low may cause sound distortion or stop playing, please charge the battery on time.
3. To maximize the battery’s lifespan, please charge the battery immediately. When the unit is not used for prolonged periods, the battery will gradually lose its power. It is recommended to fully charge the battery at least every 30 days.
4. To save battery, please power it off once stop using it.

HOW TO CONNECT

HOW TO CONNECT TO BT:

• When you turn on the speaker, the display will read OPEN which means your speaker is ready to connect.
• Go to your smart device and search for your BT device.
• You will see the device name MPD1530-XB and please select that. Please select
• MPD1530-XB and you will be connected.

HOW TO PAIR

For the TWS CONNECTION -HOW TO PAIR TWO SPEAKERS

• First, bring two speakers next to each other, and turn on both speakers.
• Both the speaker’s display should read open.
• For the first speaker/primary speaker, please press and hold the TWS button for 3 seconds.
• The primary speaker will sound an alarm and the display will show “BTST” and the second speaker automatically connects to the primary speaker.
• The display of the secondary speaker will say BT.
• Now you may connect to BT from your smart device and listen to music from both your speakers.

PANEL FUNCTION INSTRUCTION

1. MIC. VOL MICROPHONE VOLUME ADJUST
2. MODE : MODE SELECT
   • REPEAT KEY
   • REC: RECORDING; INSERT CARD PRESS THIS
   • BUTTON FOR RECORDING, PRESS AGAIN TO STOP ANC
   • PLAY RECORDING SOUND
3. DC 12V INPUT
4. AUDIO INPUT
   • M.PRI MICROPHONE PRIORITY ON/OFF SWITCH
   • GT.IN GUITAR INPUT JACK
   • MIC.IN MICROPHONE INPUT JACK
5. EQUALIZER
6. POWER ON/OFF SWITCH, RESET
7. DISPLAY SCREEN
8. CARD INPUT
9. MIC.BASS VOLUME KNOB: INCREASE/DECREASE MICROPHONE BASS
   • MIC.MID VOLUME KNOB: INCREASE/DECREASE MICROPHONE TREBLE
   • MIC. TREBLE VOLUME KNOB: INCREASE/DECREASE MICROPHONE TREBLE
10. SCAN/TWS: PLAY/PAUSE/TWS/FM STATION AUTOMATIC SEARCH
    • PREV: PREVIOUS SONG
    • NEXT: NEXT SONG
11. VOLUME MASTER VOLUME ADJUST
12. ECHO KNOB
13. BT DISCONNECT
14. X-BASS: INCREASE/DECREASE X-BASS
15. LED MODE ADJUSTMENT
16. GT. VOLUME
17. POWER INPUT: 110-240V,50/60Hz
18. FM ANTENNA

FCC

FCC Rules

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause narmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

PLEASE READ THIS USER MANUAL CAREFULLY BEFORE THE SYSTEM CONNECT

• FCC ID: 2BBFBMPD1530-XB
• MADE IN CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>