cudy LT700 4G LTE CAT 6 Wi-Fi Router Installation Guide

Quick Installation Guide
4G LTE CAT 6 Wi-Fi Router
Model: LT700

Quick Installation

1. Install the cellular antennas.

2. With the gold contacts facing down, gently slide the nano SIM card into the SIM1 slot until you hear a click sound.
   Note 1:
   The router doesn’t support SIM hot-swapping. You need insert or remove the SIM card while the router is powered off, otherwise they may get damaged.
   Note 2:
   If both SIM1 and SIM2 card slots are inserted with SIM cards, the router will automatically choose which SIM card to use. Since the automatic selection mechanism is time-consuming, it is highly recommended to insert only one SIM card when using for the first time.

3. Connect the power adapter to the router.

4. Turn on the router. Waiting 2~5 minutes for it to start.

5. Check the status of the LED.

When the LED turns solid blue or purple, it means the router is connected to the cellular network.
If the LED turns to solid red, please follow the instructions of Customize the Router.
Note:
For some ISP’s SIM card (such as Verizon), it may take longer to connect to the Internet. Please kindly wait another 2~5 minutes.

Customize The Router

1. Connect the router via Ethernet cable or Wi-Fi. Network name and password is printed on the bottom of the router.
2. Launch a web browser and enter http://cudy.net/ (or http://192.168.10.1/) in the address bar, use admin as password to login.
3. The page below would pop up if your SIM card needs PIN to unlock. Please enter your PIN and click Save & Apply, then wait 15 seconds to connect to the Internet.
4. Then please check cellular information card of the status page. If the status is connected, it means the internet connection is successful.
5. If the Internet is not connected, or you want to customize the router yourself, click “Quick Setup”  and follow the step-by-step instructions to configure the router.

Note：

1. If you are not sure about APN parameters, please contact your internet provider.
2. If you meet any other problems, don’t hesitate to contact our technical support team: support@cudy.com
3. Frequently Asked Questions: https://www.cudy.com/faq

Enjoy the internet!

LED and Button

times to reset the router to default settings.

How to upgrade firmware?

1. Download the latest firmware from https://www.cudy.com/download
2. Unzip the file you download
3. Connect to Cudy’s network via WiFi or Ethernet.
4. Open a web browser and go to http://cudy.net/or http://192.168.10.1/
5. Log into the web management page.
6. Click Advanced Settings -> Firmware.
7. Choose the firmware you unzipped to upload.
8. Waiting 2～5 minutes for the router to restart.
9. Done

Need help?
Email: support@cudy.com
Driver & Manual: www.cudy.com/download
FCC Statements:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
EU Declaration of Conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU.
The original EU declaration of conformity may be found at http://www.cudy.com/ce. Regulatory Compliance_LT700
FCC compliance information statement
Product name: 4G LTE CAT 6 Wi-Fi Router
Model Number: LT700

Responsible party: Shenzhen Cudy Technology Co., Ltd.
Address: Room A606, Gaoxinqi Industrial Park, Liuxianyi Road, Baoan 67 District, Shenzhen, China
Website: https://www.cudy.com
Tel: +86 755 8600 8993
Email: support@cudy.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.
  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
‘To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.’
We, Shenzhen Cudy Technology Co., Ltd., has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
FCC compliance information statement Product Name: I.T.E. Power Supply Model Number: DSA-12PF11-12FUS120100 Responsible party: Shenzhen Cudy Technology Co., Ltd. Address: Room A606, Gaoxinqi Industrial Park, Liuxianyi Road, Baoan 67 District, Shenzhen, China Website: https://www.cudy.com Tel: +86 755 8600 8993 Email: support@cudy.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
We, Shenzhen Cudy Technology Co., Ltd., has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2024-05-13
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Operating Frequency (Maximum transmitted power)
2400 MHz – 2483.5 MHz: 20dBm
5150 MHz-5250 MHz: 23dBm
WCDMA: B1/B3/B5/B8 (24dBm+1.7/-3.7dB)
LTE: B1/B3/B5/B7/B8/B20/B32/B38/B40/B41 (23dBm±2.7dB)
LTE: B28 (23dBm+2.7/-3.2 dB)
EU Declaration of Conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, directive 2011/65/EU, directive (EU) 2015/863. The original EU Declaration of Conformity can be found at http://www.cudy.com/ce
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
The device complies with RF specifications when the device is used at 30 cm from your body.
National Restrictions
Attention: This device may only be used indoors in all EU member states and EFTA countries, and Northern Ireland.
UKCA Mark
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subjec to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Caution:
The device for operation in the band 5150 – 5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 30cm between the radiator & your body.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Do not use the device where wireless devices are not allowed.

• Adapter shall be installed near the equipment and shall be easily accessible.

• Operation Temperature: 0° C to +40° C
  Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.

• This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Explanations of the symbols on the product label
Note: The product label can be found at the bottom of the product and its I.T.E. power supply.
Symbols may vary from products.

| Explanation
---|---
| Class II equipment
| Energy efficiency Marking
| Direct current
| Polarity of DC power connector
| For indoor use only
| Caution
| Operator’s manual
| RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
| Recycling

Email: support@cudy.com
Website:www.cudy.com 

References

• Anatel — Agência Nacional de Telecomunicações
• Anatel — Agência Nacional de Telecomunicações
• Cudy, Your Home and Business Networking Solutions Provider
• Download Search – Cudy
• Download Search – Cudy
• Cudy, Your Home and Business Networking Solutions Provider
• Download Search – Cudy
• FAQ - Cudy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>